We're compiling the best Holiday 2016 music gear deals. See them here.
The RME Babyface Silver Edition has the latest 192kHz AD/DA-converters, two reference class microphone preamps, SteadyClock, and RME's premier analog circuit design. Babyface Silver includes new TotalMix FX, a TotalMix on steroids, with tons of ne...
The RME Babyface Silver Edition has the latest 192kHz AD/DA-converters, two reference class microphone preamps, SteadyClock, and RME's premier analog circuit design. Babyface Silver includes new TotalMix FX, a TotalMix on steroids, with tons of new features, improvements and 3-band parametric EQs, plus added echo and reverb: anything you need right out of the box and with near zero latency!
The Babyface uses RME's Hammerfall USB audio core from the Fireface UC - another milestone in low latency audio interfaces, and will give you outstanding performance and top-quality sound in an ultra-portable, nicely designed and attractively shaped enclosure.
The balanced XLR I/Os and the TRS phones outputs use RME's analog circuit design, therefore guarantee outstandingly low noise and distortion values. The latest generation AD/DA converters provide sample rates up to 192kHz with a signal-to-noise ratio of up to 115dBA. Due to its efficient jitter reduction, SteadyClock guarantees pristine sound quality, even when clocking to an external digital source.
High-End Mic Preamps
Both digitally controlled preamps provide individually switchable 48V phantom power; gain of up to 60dB, adjustable in steps of 3dB over a range of 51dB; exceptional EIN performance even at low amplification settings; and extremely low THD+N values let these preamps surpass those of other devices that cost several times the price of the Babyface. All level settings are 100% recallable by the setup software and can be comfortably adjusted directly at the unit.
The incredible feature set includes an optical TOSLINK I/O, usable as ADAT port with SMUX support or SPDIF optical at up to 192 kHz. In combination with an ADAT converter, like RME ADI-8 QS or OctaMic II, the Babyface provides an incredible amount of 10 analog input and 12 output channels.
The additional headphone output, driven from a separate and dedicated DA converter, delivers the full sonic experience of up to 192 kHz and is available not only directly at the unit but also at the breakout cable. The phones level is easy to adjust and control with a simple click of the select button and the main volume knob.
Directly plug in your guitar or other instruments by switching one input to Hi-Z input mode. Recording any instrument becomes a breeze and does not require any other hardware.
MIDI I/OThe integrated MIDI I/O completes the list of features and turns the Babyface into a creative audio system of universal usability. Do what you want - wherever you want!
With one main control knob and two single buttons the elegant Babyface acts as a perfectly designed direct desktop control for all typical studio tasks: volume control, reference volume store and recall, volume dim, input selection/switching, input gain control - quick and easy access to all functions has been a major point during design and development. The LED bars serve as both level and gain meters, visually supporting the precise control of all inputs, outputs and headphone levels directly at the interface.
USB Made by RME
The Babyface provides RME's unmatched USB pro audio technology for revolutionary ultra-low latencies on Mac and PC, by using two different optimized firmware versions for both operating systems. Like other RME USB 2.0* interfaces, the Babyface provides revolutionary ultra-low latencies even with multiple channels. The Babyface Silver Edition achieves latency values down to 48 samples on Windows and 14 samples on Mac OS X.**
** Minimal latencies are not guaranteed as they depend on the specific computer and application.
The ultra-portable Babyface Sivler Edition has been designed for bus-powered operation (some systems might require a special two USB connector cable - included). This turns the Babyface into the perfect partner for mobile recording of live performances, composing sessions in a park or coffee shop, or just wherever you go. Even if you just see it as a good looking HIFI music player or home studio companion - it will work perfectly on every desktop and laptop computer.
Rear Connectors . The Babyface provides two optical I/Os and a 15-pin D-sub connector. Both TOSLINK connectors for ADAT or SPDIF optical are on the back of the Babyface. The breakout cable - connected directly or via a special extension cable - offers the following connections:
4 x XLR balanced (Analog I/O)
1 x 1/4" TRS for Phones (= Analog Out 3+4)
2 x DIN (MIDI I/O)
The next generation of TotalMix delivers hardware mixing/routing with lots of new features and a highly improved usability. For a seamless integration of the new features TotalMix has been rewritten from the ground up. The DSP mixer now not only matches features of high-end digital consoles but even adds effects like a 3-band parametric EQ plus Low Cut on all input and output channels. The Babyface also provides a separate FX send bus for all inputs and software playback channels, feeding two effect engines: Reverb and Echo. Every output channel includes a FX return control for the FX output signal.
What's new in TotalMix FX:
*****New design and improved usability
*Control Room Section: Dedicated section for the main output (e. g. studio monitors) and other monitoring outputs (e. g. phones). All existing stereo output channels can be freely assigned as source for the control room section channels.
*Four definable groups for Solo, Mute and Faders
*Switchable Mono and Stereo channel view
*Channel Options: Stereo Width, MS Processing, Phase L/R
*Trim mode: Adjusts the volume for all routed signals of a channel. This option allows to modify the volume of all sends of a channel simultaneously, equalling a hardware's trim functionality.
*Unlimited Undo and Redo
*FX Sends and Returns: One send bus for every input/playback channel with Reverb/Echo
*Expandable channel view for channel settings and EQ setup
*Slim channel mode for selected or all channels, to save space or give a meter bridge view
*2-Row Mode: reduces the height of the mixer to two rows for smaller displays
The DSP-based hardware calculates RMS and Peak levels for all channels without causing any CPU load.
this is far the most stable audio interface i ever own its a portable giant has midi outs has adat in and outs and spdif in and out is capable of recording 12 mics on usb and as low as 32 buffer i cant say nothing bad about this but i dont like the breakouts cables hanging arround thats the only turn off but the preamps are neutral clean and usable no colorations same as the converters they are great not as best as lynx aurora but they are great for my mobile setup and the best part of this the drivers they are very solid i never had latency problems or dropouts from usb port