SD YJM pickups

Hey guys, so I want to put a set Yjm's in my strat but I want to switch out the bridge pickup with a humbucker. Do I need to swap out potmeters because a humbucker is 500k or is it ok to just swap out the pickups? Im pretty much new to guitar electronics so any advice would be great. Regards Diego.

unless its a very low output humbucker (7k or less) you are going to need 500K pots to have any treble... but, most strats have no tone on the bridge and a global volume, so you are going to brighten the neck and idle if you raise the value of the master volume pot.... I know some guys stay stock or others will experiment with different value pots across the board like 300k but my suggestion is NOT to add a humbucker because its not stratty

try the duncans stock first, they are designed to work as a team in that specific set... also consider moving one of the tone knobs from the neck or middle pickup to the bridge pickup to smooth her out a bit... this is a classic mod that always modernizes strat bridge pickups a little giving you an ultra chimey position with some bottom end as well as a nice thick single coil lead without the piercing treble

then if you really want a humbucker consider switching to series wiring or adding a series/parallel option with a so-called super-switch

if you must add a humbucker, search the Seymour Duncan forum for advice...