mark_hiser

mark_hiser's Reviews

8 reviews Back to mark_hiser's Equipboard

mark_hiser

Great vintage tones!

Super hollow body vintage tone but has enough drive to cut through the mix!

mark_hiser

Great Compressor

Does exactly what a bass compressor should do with on;y one knob and it's small enough to fit anywhere.

mark_hiser

Nice little mixer for the price!

I'm using it to run my in-ears monitor (mixing sound board (vocals / Guitars) with my 2 bass inputs from Rolls X-over, (one high end / one low end) Small enough to fit in my rack.

mark_hiser

Great sounding with tons of low end punch!

Professionals choose the XL Series because of its carefully calibrated and tuned cabinet design along with its high-quality aluminum cone drivers. These cabinets produce a smooth response along with the clear, punchy attack that changed the sound of bass. The 410XL features a twin chamber, dual-ported design. Housed in the cab are four 10-inch proprietary low frequency drivers that employ large voice coils, impregnated fabric surrounds and convex dust covers, all mounted in a heavy-duty steel frame. And with 400 watts of available power handling and a frequency response of 30 Hz to 5 kHz, this cabinet ensures professional performance and remarkable tone for any style of playing. Built for the road, the 410XL uses heavy-duty plywood construction and is covered in rugged carpet. Additionally, a recessed jack plate and ergonomic metal handles make transporting this cab no sweat. With strength to endure and tone to amaze, the 410XL ensures a performance that will make mouths drop.

Dual-Chamber, Dual-Ported Cabinet Four Hartke XL 10" Aluminum-Cone Bass Drivers Power Handling: 400 Watts @ 8 Ohms Frequency Response: 30 Hz To 5 kHz Sensitivity: 98 dB @ 1 W/1 M Voice Coil: 1.5" Magnet Weight: 60 Oz. Parallel 1/4" Inputs Dimensions: 24"(H) X 24"(W) X 15"(D) Weight: 88 lb.

mark_hiser

Nice size sounds great

Professionals choose the XL Series because of its carefully calibrated and tuned cabinet design and high quality aluminum-cone drivers. XLs produce a smooth response along with the clear, punchy attack that changed the sound of bass. Each cabinet is built tough with a shockproof metal grill, reinforced corners, recessed carry handles and a rugged covering.

210XLExpanded Hartke sound for smaller venues. A single chamber, sealed cabinet with two 10" aluminum-cone bass drivers. Power handling is 200 watts at 8 ohms with a frequency response of 50 Hz to 5 kHz.

mark_hiser

These Rock for Bass Guitar!

Our quad driver was developed with bass lovers in mind. It reaches to the lowest of lows while still keeping the midrange and the highs crisp and clear. Until now, this kind of bass response was only possible with large, bulky headphones. With four balanced armature drivers per earpiece, the Quad Driver’s sound signature is sure to please stage musicians like drummers, bass players and the like.

Like all 1964 Ears custom IEMs, the Quad monitors are inherently noise canceling and are designed to work well with all of today’s standard wired, wireless monitor systems and a wide range of personal listening devices. ACCESSORIES INCLUDED: Personalized protective case 48 or 64 inch detachable cable 1/4 inch adaptor Cleaning tool Shirt clip

mark_hiser

Say goodbye to batteries - This cable works great!

This is our premium Rockon Cable. This product combines the functionality of an instrument cable and a headphone extension cable into one simple solution. It is specifically designed to work with our headphones amps and IEMs, but can also be very useful with any other standard headphone amp.

Headphone singal connectors: -1/4" TRS male to 1/8" TRS female (in-line split).

Instrument signal connectors: -Please choose from the drop down menus to customize your cable. We have two 1/4" Tip-sleeve (TS) connectors available: Straight (STR) and Right-angled (RA). They are both high quality SwitchCraft nickle-coated connectors.

All our products are hand soldered in the USA by our in-house technicians, and come with a 3-year guarantee.

Premium materials include: -Amphenol 1/4" TRS connector -Switch Craft 1/4" TS connector (RA and STR) -CALRAD "no-crackle" 1/8" TRS headphones connector -Gepco X-band fully shielded cable. -Canare GS-4 hi-fi, low capacitance instrument cable -Durable and flexible outer jacket made from no-fray expandable nylon sleeve

Features: -Extra heat shrink around instrument line to add strength -Thick, glue-lined heat shrink around headphone splitter for extra strength -Rubber padding between metal brace and raw cable to protect cable from wear and tear -Guaranteed quality of solder work from our in-house technicians

mark_hiser

Best in-ear headphone amp you will ever hear!

As the latest addition to Rock On Audio's product line, The Tasty Blender continues the tradition of innovation and provides yet another unique personal monitor system.

Following in the footsteps of it's analog predecessor (The Rockbox Limiter) The Tasty Blender adds many more features including: 3-channel input, stereo functionality and very sophisticated 3-stage stereo DSP limiting. Most importantly, the limiter includes "look ahead" technology that limits transient sounds before they ever hit your ears.

Key Features: * 3-Channel mixer with headphone output * 24-bit/96Khz digital audio * Advanced 3-stage protective limiting * Ideal for IEMs * Mono/Stereo modes * Bass Frequency Control * Wide power input range (5-16V) * User friendly interface

Input details: * Channel 1: Line level (bal/un-bal) * Channel 2: Line level (bal/un-bal) * Channel 3: Line or Speaker level (un-bal)

Limiter Details: * All 3 have adjustable thresholds * Limiter 1: RMS with fast attack * Limiter 2: RMS with slow attack * Limiter 3: PEAK with fast attack (also features unique look ahead p