petejoshman's Activity

The Empire features a 24 3/4 ” scale, and two Godin Kingpin P90 single-coil pickups. Pickups are housed in the single cutaway solid mahogany body and are controlled by separate volume and tone knobs, along with a 3-way toggle switch.

The Empire’s bolt-on mahogany neck features the worn in feel of an Ergocut rosewood fingerboard for an incredibly comfortable playing experience. These retro rockets are finished off with high-ratio tuning machines, a chrome wraparound bridge and high gloss finish.

Specs : Mahogany neck. Rosewood Fingerboard 12" fingerboard radius 24 3/4" Scale 1 11/16" nut width. Solid Mahogany body. 2 x Godin Kingpin P90 single-coil pickups Controls: 3-way switch, 1 x Volume, 1 x Tone. Chrome wraparound bridge. Color: Natural Mahogany HG

Body Size: D-14 Fret, Slope Shoulder Top: Solid Sitka Spruce Back & Sides: Mahogany Neck: Mahogany Saddle: Bone/Compensated Nut: Bone Fingerboard: Indian Rosewood Scale Length: 24.75” (628 mm) Neck width at nut: 1-11/16” (42,9 mm) Tuning Machines: Chrome, diecast Electronics: Sigma Preamp (with Tuner) Strings: D´Addario EXP16

Specifications: (all versions)

Cutaway. Body width: 420 mm. Body length: 510 mm. Scale length: 630 mm. Hand carved top. Spruce top with undetermined bracing. Maple back & sides. Single-bound top with unbound f-holes. Single-bound back. Single-bound pickguard. Mahogany bolt-on neck with adjustable truss rod. Metal truss rod cover with a star and "1900". Unbound headstock with mother-of-pearl inlay. Most with no headstock logo 1957-1959. Unbound rosewood fingerboard with mother-of-pearl dot inlay. Open back tuners. Nickel plated hardware. Sunburst finish.

Specifications:

Cutaway. Body width: 420 mm. Body length: 510 mm. Hand carved spruce top. Walnut or mahogany back & sides. Single-bound top with unbound f-holes. Single-bound back. Unbound pickguard. Mahogany neck with non-adjustable T-shaped duraluminum truss rod. Unbound headstock with pearloid inlay. Unbound rosewood fingerboard with pearloid dot inlay. Nickel plated hardware. Sunburst finish. Large bridge thumbwheels.

The Artec VPL-1 Active Volume Pedal features minimum and maximum volume controls and 2 outputs (1 fixed gain and 1 adjustable gain.) where you line-in a tuner without worry on the pedal positioning. This pedal also features Artec's magnetic, noise-free "permanent pot" which eliminates the interference that you might hear with a normal pot and and an effortless "no Click" response. Very nice control here for all types of music and tonal swells. Features at a glance: Active volume pedal. Ingenious level-adjustment. Maximum-Pot: controls the value at down position of the pedal (at neutral position Input=Output, no boost. Minimum-Pot: controls the value at clicked up position (at zero muting occurs). Sturdy sheet steel casing. Mono-plugs input and output. Additional Fixed-Gain Output (f.i. for tuner). Power supply: 9-V battery or 9V power supply. LED for low battery level

• Top, Back and Rims: 5-ply laminated maple/birch • Neck: mahogany • Neck shape: 1960s SlimTaper "D" profile • Neck joint: glued in • Truss rod: adjustable • Truss rod cover: Black Kalamazoo- era bell shape with "ES-335 PRO" in white and white trim on the edges of the truss rod cover • Scale length: 24.75 in. • Headstock: Sloped Dovewing with "pineapple" logo and 60s era "Epiphone" script • Fingerboard material: rosewood with small block inlays • Pickups: Epiphone Alnico Classic PRO 4-wire • Controls: Epiphone all-metal 3-way pickup selector Neck pickup volume with Push/Pull coil-splitting Bridge pickup volume with Push/Pull coil-splitting Neck pickup tone Bridge pickup tone • Binding: body top, 1-ply (cream), body back, 1-ply (cream), fingerboard, 1-ply (cream) • Fingerboard radius: 12in. • Frets: 22 medium jumbo • Bridge: LockTone Tune-o-matic • Tailpiece: StopBar • Nut Width: 1.68 in. • Hardware Plating: Nickel • Machine Heads: Wilkinson Vintage classics, 14:1 ratio, green 'tulip' style buttons

The Traynor DynaGain DG10 delivers a full 10-watts through its high quality 8-inch Celestion™ speaker. Capable of delivering clean tones or overdrive at the touch of a switch, the DG10 is ready for any style of music.

DynaGain Solid State tube emulating preamp utilizes 100% analog circuitry for a truly warm and natural tone

10-Watts 8-inch Celestion™ Speaker Overdrive Bass / Mid / Treble Controls Auxiliary Line Input for CD or MP3 Player 1/4-inch TRS Headphone Jack

The LX12 features a single channel with switchable gain – giving you some gain choices from clean all the way up to extreme, a 3 band EQ, a CD input and a headphone socket. The 6” custom designed driver handles the 12 watts RMS sonic mayhem and is protected by a kick proof steel grille.

Channels: 1 with switchable gain Packed Dimensions (HxWxD mm) 340 x 339 x 220 Drivers:1x6" Custom Driver
Equalisation: Global Bass, Mid and Treble Power: 12 Watts