troyrk's Activity

The stutter pedal can be used like the toggle switch between the neck and bridge pickup when one pickup is turned off and quickly switching on and off to make a stutter effect.

The Y Splitter Mute Switch pedal is used to split your signal and gives you the ability to mute that signal coming in.

When powered the Red LED is lit when the signal is muted.

This pedal is completely passive and needs no power to operate.

The Mute pedal is a great way to mute your signal between songs, after and before sets and tuning your guitar.

When powered the Red LED is lit when the signal is muted.

This pedal is completely passive and needs no power to operate.

A popless microphone mute switch that allows the user to click on and off the latching footswitch to mute his mic.

Great for musicians using talk back systems, studio musicians or lead singers who cough.

A very versatile box that can be used with any XLR input.

This will work with any microphone and is designed to pass through phantom power without degrading the signal.

Our pedals utilise true bypass circuitry for best sound quality and an unaltered tone.

This pedal does not need power to operate. 9V (negative tip) power is used to power LED only.

A popless microphone mute switch that allows the user to depress a foot switch to mute his mic. The button is momentary, so holding the button down mutes the signal are releasing it un-mutes. Great for musicians using talk back systems, studio musicians or lead singers who cough.A very versatile box that can be used with any XLR input.

This will work with any microphone and is designed to pass through phantom power without degrading the signal.

Our pedals utilise true bypass circuitry for best sound quality and an unaltered tone.

A popless microphone mute switch that allows the user to depress a foot switch to mute his mic. The button is momentary, so holding the button down mutes the signal are releasing it un-mutes. Great for musicians using talk back systems, studio musicians or lead singers who cough. A very versatile box that can be used with any XLR input.

This will work with any microphone and is designed to pass through phantom power without degrading the signal.

Our pedals utilise true bypass circuitry for best sound quality and an unaltered tone.

A popless microphone mute switch that allows the user to depress a foot switch to mute his mic. The button is momentary, so holding the button down mutes the signal are releasing it un-mutes. Great for musicians using talk back systems, studio musicians or lead singers who cough.A very versatile box that can be used with any XLR input.

This will work with any microphone and is designed to pass through phantom power without degrading the signal.

Our pedals utilise true bypass circuitry for best sound quality and an unaltered tone.

The Kill & Stutter pedal is a great 2 in 1 pedal

The Kill switch is a great way to mute your signal between songs, after and before sets and tuning your guitar.

The Stutter pedal is a momentary kill signal pedal that when pressed will kill the sound from your guitar but when released will allow the signal back through.

The pedal is like a tremolo pedal but kills the signal completely.

The pedal is housed in the ultra compact box so will fit easily on even the tightest pedalboard.

This pedal is great for creating cool effects and used by a lot of metal guitarists

This pedal is completely passive and needs no power to operate.

The 1 in, 1 out XLR patchbay provides a port thru interface for patching XLR cables and keeping them clean.

The pedalboard stereo patchbox is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

This patchbox is designed for a pedalboard with a loop of pedals for in front of the amp and a loop of pedals for the amp’s FX loop.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

5 jacks are stereo jacks

All ground connections are common and connected through the case. If you require an isolated patch, check our isolated patchboxes.

The pedalboard patchbox is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

Isolated box however is recommended if you are going to run anything like a amp channel switch into one of the patches as that has power running down the line sometimes that can cause noise in your system. It is also recommend them is you are running out to 2 or more separate amps as a non-isolated box can cause ground loop issues.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

And by keeping an extra patch cable with your board, you can go from using an amp with an effects loop to using one without easily.

All connections are isolated from each other.

The pedalboard patchbox is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

Isolated box however is recommended if you are going to run anything like a amp channel switch into one of the patches as that has power running down the line sometimes that can cause noise in your system. It is also recommend them is you are running out to 2 or more separate amps as a non-isolated box can cause ground loop issues.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

And by keeping an extra patch cable with your board, you can go from using an amp with an effects loop to using one without easily.

All connections are isolated from each other.

The pedalboard stereo patchbox is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

All jacks are stereo

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

All ground connections are common and connected through the case. If you require an isolated patch, check our isolated patchboxes.

The pedalboard stereo patchbox is the ultra compact pedal that is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

3 stereo jacks to 3 stereo jacks

All ground connections are common and connected through the case. If you require an isolated patch, check our isolated patchboxes.

The stereo pedalboard patchbox has 2 stereo thru connections and is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

All ground connections are common and connected through the case.

If you require an isolated patch, check our isolated patchboxes.

The pedalboard patchbox is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

This patchbox is designed for a pedalboard with a loop of pedals for in front of the amp and a loop of pedals for the amp’s FX loop.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

4 inputs are mono jacks and 1 is stereo

All ground connections are common and connected through the case. If you require an isolated patch, check our isolated patchboxes.

The pedalboard patchbox is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

This patchbox is designed for a pedalboard with a loop of pedals for in front of the amp and a loop of pedals for the amp’s FX loop.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

5 inputs are mono jacks

All ground connections are common and connected through the case. If you require an isolated patch, check our isolated patchboxes.

The pedalboard patchbox is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

Isolated box however is recommended if you are going to run anything like a amp channel switch into one of the patches as that has power running down the line sometimes that can cause noise in your system. It is also recommend them is you are running out to 2 or more separate amps as a non-isolated box can cause ground loop issues.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

This patchbox includes an insert patch point the always allows the signal to pass through the middle bottom jacks when nothing is plugged into the top yellow jacks. However when the top jacks are plugged in, then the signal diverts to those jacks so you can insert a amp send/return, volume pedal, effect pedal or even isolate an output to your signal chain with ease.

The pedalboard patchbox is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

Isolated box however is recommended if you are going to run anything like a amp channel switch into one of the patches as that has power running down the line sometimes that can cause noise in your system. It is also recommend them is you are running out to 2 or more separate amps as a non-isolated box can cause ground loop issues.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

And by keeping an extra patch cable with your board, you can go from using an amp with an effects loop to using one without easily.

All connections are mono and are isolated from each other.

The pedalboard patchbox is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

And by keeping an extra patch cable with your board, you can go from using an amp with an effects loop to using one without easily.

All ground connections are common and connected through the case. If you require an isolated patch, check our isolated patchboxes.

The pedalboard patchbox is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

And by keeping an extra patch cable with your board, you can go from using an amp with an effects loop to using one without easily.

All ground connections are common and connected through the case. If you require an isolated patch, check our isolated patchboxes.

The pedalboard patchbox is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

Isolated box however is recommended if you are going to run anything like a amp channel switch into one of the patches as that has power running down the line sometimes that can cause noise in your system. It is also recommend them is you are running out to 2 or more separate amps as a non-isolated box can cause ground loop issues.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

And by keeping an extra patch cable with your board, you can go from using an amp with an effects loop to using one without easily.

All connections are isolated from each other.

The pedalboard patchbox is the ultra compact pedal that is the ideal pedal for cleaning up your pedalboard. It allows you to have all cables from your board in the same location allowing neater chord runs on stage.

The patchbox allows the guitarist to leave their pedal chain permanently connected. The guitar plugs into the in jack and the out jack remains connected to the first pedal in the chain making setup and takedown a breeze.

It allows you to save the life of the jacks on your pedals by not plugging in cables everytime you play.

3 mono jacks to 3 mono jacks

All ground connections are common and connected through the case. If you require an isolated patch, check our isolated patchboxes.

The M2S MIDI Adapter converts MIDI control change (CC) messages into six isolated contact closures. Since every switch port has zero connection to any other port, each switch can remotely control separate devices while avoiding ground loop and crosstalk problems. Switch ports can be used to switch amp functions, control tap tempos, Suhr FX Link pedals, Strymon favorite switches (with adapter cable), JHS Red Remote cables, and the XTS RMT port on any so equipped XTS pedal or any pedal modified with our soft-touch true-bypass RMT switching system. We can modify almost any non-mini FX pedal with our RMT system! The M2S can be controlled by any MIDI controller capable of sending CC messages. RJM, Morningstar, Disaster Area, Voodoo Lab, CAE, and many others make compatible MIDI controllers. You can even setup your Line 6 HX Effects or HX Stomp to control the M2S and, subsequently, any device connected to it. When combining multiple M2S units in a single system, assign each to different MIDI channels to expand your switching capacity. Unit comes with six 1/8" cables for connecting the M2S to other devices.

The XTS Preamp is a great all-in-one solution for those looking to get excellent overdriven, crunchy, and distorted tones from a pedal. The Preamp holds three of our most popular circuits, the Atomic Overdrive, the Precision Multi-Drive, and the Pegasus Boost... all in one box! We have designed it to function like a two channel preamp plus a boost; add your favorite delay and you'll have a small but formidable guitar rig! Change tones with one press of the Channel Select button. No more stomp-off-then-stomp-on. Quickly change from one great tone to another! You can use the Pegasus independently of the two drives, and with the Pre-Post switch you can put the boost before or after your selected drive, giving you the option to add saturation to your dirty sound or a level boost to get over the band for soloing. You'll inevitably discover how it works best for you, but you may want to try setting the Precision for a dirty rhythm tone, the Atomic for a little more crunch and then use the Pegasus as a lead boost. Given the flexibility of each pedal alone, combining them in the XTS Preamp results in a dizzying array of sonic possibilities!

The Tejas Overdrive has the exact same topology as its boosting cousin. The only change is that the internal volume control has migrated to a full-fledged Volume knob on the outside. Now you have convenient control of your output level! Adjust the Gain knob for as much boost, grit, or crunch as you like and use the Volume control to maintain unity level or give yourself a level bump over your bypassed signal.

What happens if you take the Tejas Boost and Overdriver circuits and swap out those big orange-drop caps for their smaller equivalents? You get the Tejas Drive! It's smaller but still huge on tone. The Tejas Drive uses the exact same transistor and resistor types as its bigger brothers, but takes advantage of the smaller type of caps that we use in our other pedals. The same great Tejas family sounds in a package half the size!

The XTS Tejas Boost offers boost with EQ and an overdrive/distortion in one box. With the Gain set low, the Tejas Boost offers a warm increase in volume and chime that works great bringing an amp to new levels of breakup or works in conjunction with other pedals like compressors to bring new sounds to your current pedalboard setup. With the Gain turned up, the Tejas offers an uncompressed, musical breakup that can make a crunchy amp really sing. The tone controls are voiced to be useful across their entire ranges, letting you add sparkle, cut some tubby-ness, or otherwise modify your tone to exactly what you're looking for. Max out the Gain control, and the well-behaved Tejas gives way to a decidedly unruly distortion sound that ventures into fuzz characteristics. The Tejas combines a classic topology with new XTS circuit modifications. We use carefully selected components, including orange drop capacitors, that work together to produce an amazing array of sounds that are always warm and musical.

The XTS Shapecharger is a discrete transistor circuit capable of a wide variety of boost types. It consists of two independent FET boost sections; one for full-bodied, transparent gain and the other for focused, mid-range control. Because of the valve-like characteristics of these boost circuits, the Shapecharger has a vacuum tube quality that makes your guitar sound sweeter while still being faithful to reproduce all the nuances of your particular instrument. The primary gain circuit is a full-range boost very similar to our Pegasus Boost. It is a simple circuit that provides clean gain, but can also breakup beautifully under higher gain settings when driven hard. While full-range gain is great in many circumstances, it is sometimes necessary, particularly when driving pedals and amps already breaking up, to remove some bass frequencies from your boosted signal, making sure your sound stays tight and controlled. The Shapecharger's RANGE control sculpts your signals low end with a shelving, high-pass circuit. Small amounts of RANGE tightens up a tubby amp, and turning the GAIN and RANGE up gives great, treble-boosted tones. The secondary gain circuit is a mid-boost with a sweepable mid frequency. The mid-boost comes before the primary gain circuit and is capable of overdriving it and any amp or pedal that comes after. The mid-boost and its parametric control are a discrete transistor design, simple, but very powerful in application. With mid-frequency control, you can boost low-mid frequencies for throaty fullness or high-mid frequencies to add classic guitar cut. At extreme settings, cocked-wah tones are available. The Shapecharger also introduces our S.M.R.T. Switch. When you put your Shapecharger into S.M.R.T. Switch mode, you can turn the primary gain circuit on and off by itself, and then add the mid-boost circuit to it for solos or additional gain tones. This dual function mode makes the Shapecharger two pedals in one and is great for players with compact rigs and anyone looking for a variety of gain-stage options for their guitar rig.