What’s on your pedalboard

Recently reorganised mine: Digitech Grunge, Tone City Kaffir Lime, Tone City Golden Plexi, EHX Neo Clone, Vivlex Flanger, EHX Memory Boy, TC Electronics HoF2, Line6 DL4 and lastly Tone City Tiny Spring.

At the moment? No board right now. TC nova drive and/or an ep3 echoplex whenever I have it working right. It's a maintenance hassle but really an iconic sound even with the echo off

I don't think you have enough stuff.

You know, I've been thinking the same thing 😂 I've got a wah, compressor, loop and footswitch all off board atm cause I'm out of room, so it might be time to build board No.2

I don't have a strict order for my pedals, as I'm always changing it, but here goes: Marshall Jackhammer OD/distortion, Cuvave fuzz, Dunlop CryBaby, Behringer noise reducer, EHX Volume pedal, Zoom MS70-CDR multi-effect pedal. Also, not a pedal, but I use an Ebow (Joyo Infinite Sustainer) from time to time. But yeah, I try and keep it compact, these six pedals seem to be enough for now, as the Zoom covers all my modulation/delay/reverb needs

Can you stack modulations/delays/reverb on the Zoom, or do you have to pick one effect at a time to use?

Yeah you can stack them! You can have up to 6 effects at a time officially, though some effects take up more memory of course (for example shimmer reverb takes up over 3 spaces, so you might be able to stack it with one or two other effects). Of course you can also save the effects you've stacked as presets, so you don't need to dial them in again, and best part is it's only a little over 100EUR, it's a steal at that price (especially as I was able to sell some other pedals to pay for it)!

Currently I'm running two boards....

My "Analog" Board is a SKB PS-45 powered pedalboard with - BOSS TU-2 Tuner - CreepingNet FazzFuzz Fuzz Pedal (home built) - CreepingNet SkullFuzz Fuzz Pedal (home built) - EHX Pitch Fork - Crybaby GCB95 Wah Wah - Behringer PH-9 Phaser - Digitech X-Series Flanger - EHX Small Clone reissue - BOSS DD-7 Digital Delay - Behringer (Plastic) Noise Gate

I use a mix of Radio Shack, Horizon, Home Built, and Monster Cable cables.

I'm also building a "Digital" board for Direct input, and possibly just moving to a digital solution for the halfstack using a Line6 HD500 currently. I was fairly well able to replicate everything above on that board the way I use it and then some so I might start using that instead. Postage Stamp sized stages are quite a reality for me these days.

You know, I've been thinking the same thing 😂 I've got a wah, compressor, loop and footswitch all off board atm cause I'm out of room, so it might be time to build board No.2

Either that or it's time to assess your minimum needs. I always found a few months hard gigging with a solid band lineup really helped me streamline... sometimes down to a tuner based on what was integral to putting on a good show while maintaining speedy setup and breakdown. What can people actually hear? What's too s8btle for a PA system?

My recording 'board' is anything and everything in my studio though. Which is racks of gear and drawers of pedals... and synthesizer external audio inputs. If I can get level matched for each input and keep the impedances in a reasonable range I'll try anything... if you can get me to pick up a guitar.

This is my pedalboard - a volume pedal, a tuner pedal and an RJM MIDI controller to control my rack rig.

never bothered getting an actual board, but the chain goes: proco rat, crybaby 535, boss tu2. as a further mention the crybaby 535 is some japanese exclusive thing its not the 535q, they actually sound pretty different the 535 has a bit more of a low end kinda sound to it

Rat INTO wah... my 90s preference. Now that's a setup. A little fuzz, a little warble and done.

Unfortunately, I still don’t have a big pedalboard, but in my music school, I have a multi effect pedal connected to another multi effect processor. At home, the only pedal I have is a Behringer UP-300 Ultra Phaser pedal.

I'm not being sarcastic. You gave plenty of fx.