hashimoto's activity

edited GForce Software Oberheim DMX

Improved item category.

Set Plugin Format to VST, AU, AAX
Set Operating Systems to Mac, Windows

Oct 29, 2025

edited GForce Software Oberheim DMX

Improved item category. Improved item image. Added item description. Added brand.

Revised item name. Show revisions
Before:
GForce Software GForce Oberheim DMX
After:
GForce Software Oberheim DMX
Revised item description. Show revisions
Before:
After:
The Oberheim DMX by GForce Software.

Official emulation of the classic Oberheim DMX drum machine
Includes the 1981 Oberheim DMX sounds, the sounds of the 1983 revision, the Oberheim DX sounds and the Sequential Drumtraks sound kits with many variations

Solo, mute, delay and reverb sends, pitch, decay, pan and gain on each track
Multi-mode filter, distortion and compressor on the master
Over 20 Preset-Kits
Over 70 MIDI files with many classic patterns
Velocity control
MIDI-Learn
Scalable user interface

System Requirements:

• Shipping Format: E-Mail
• License validity: perpetual
• Copy Protection: Online Activation
• Simultaneous Activations: 2
• Windows: from 7 (64-Bit)
• Mac OS (64 Bit): from 10.15
• CPU min.: 2 GHz
• RAM min.: 2 GB
• add. System requirements: Internet Connection for Installation and Activation

Supported Formats:

• Stand-Alone-Software
• AAX native 64-Bit
• AU 64-Bit
• VST2 64-Bit
• VST3 64-Bit
Revised item category. Show revisions
Before:
Drum Machines
After:
Drum Machine

Oct 29, 2025

edited Caveman Audio BC1 Bass Compressor

Improved item image.

Revised item description. Show revisions
Before:
The BC1 Bass Compressor by Caveman Audio.

The BC1 is a Completly Analog Compressor Handbuild made in Denmark.

A Boost circuit is not common on compressor pedals, but then again, BC1 is a different beast !
As mentioned, we recommend using BC1 as a master compressor at the end of your signal chain, which might have left you with a problem.
You’d probably kick in a boost pedal for that, but since BC1 is sitting after a boost pedal, the signal coming into BC1 would be hotter, and BC1 would simply compress more.
That is why we have both LEVEL and BOOST controls. Use LEVEL to set the overall output level.
Set the BOOST control a bit higher and it will give you a level boost when you kick it in – but without changing the amount of compression !

When compressing your entire sound, you compress much less.
Therefore, you need a longer attack time than most comp pedals can provide in order to avoid killing the dynamics in your playing.
We want the compressor to help you to sit better in the mix by making the output from each string more even.
We don’t want it to kill your dynamic playing.
BC1 offers up to 25ms before the compressor kicks in, which leaves the precious transients of your tone intact. Those transients are often referred to as ‘definition’, and you don’t want to lose that !
That said, you can easily go below 25ms, and if you want to create a hard-pumping compressor effect, BC1 can take you all the way down to 0.1ms.

Selected Components And Screened Cables • All components are carefully selected to ensure superior sonic quality • All audio cables inside are high-quality screened cables only • All PCB circuit boards are Gold-plated for best performance

Zinc-Plated Steel Chassis • Protects against RFI, electric and magnetic fields • Built like a tank to handle the most rigorous touring demands • 10-year warranty

Specs:

• Input Impedance 5MΩ
• Output Load D.I. 2kΩ or more
• Output Load Amp Out 2kΩ or more
• Line In Impedance 15kΩ
• Dim. Metric 220 x 145 x 40/65 mm (WxDxH)
• Dim. Imperial 8.66” x 5.71″ x 1.57″/2.56″ (WxDxH)
• Weight 1.5 kg / 3 lbs. 5 oz
• Power 12VDC @ 200mA – center negative

After:
The BC1 Bass Compressor by Caveman Audio.

The BC1 is a Completly Analog Compressor Handbuild made in Denmark.

A Boost circuit is not common on compressor pedals, but then again, BC1 is a different beast !
As mentioned, we recommend using BC1 as a master compressor at the end of your signal chain, which might have left you with a problem.
You’d probably kick in a boost pedal for that, but since BC1 is sitting after a boost pedal, the signal coming into BC1 would be hotter, and BC1 would simply compress more.
That is why we have both LEVEL and BOOST controls. Use LEVEL to set the overall output level.
Set the BOOST control a bit higher and it will give you a level boost when you kick it in – but without changing the amount of compression !

When compressing your entire sound, you compress much less.
Therefore, you need a longer attack time than most comp pedals can provide in order to avoid killing the dynamics in your playing.
We want the compressor to help you to sit better in the mix by making the output from each string more even.
We don’t want it to kill your dynamic playing.
BC1 offers up to 25ms before the compressor kicks in, which leaves the precious transients of your tone intact. Those transients are often referred to as ‘definition’, and you don’t want to lose that !
That said, you can easily go below 25ms, and if you want to create a hard-pumping compressor effect, BC1 can take you all the way down to 0.1ms.

Selected Components And Screened Cables
• All components are carefully selected to ensure superior sonic quality
• All audio cables inside are high-quality screened cables only
• All PCB circuit boards are Gold-plated for best performance

Zinc-Plated Steel Chassis
• Protects against RFI, electric and magnetic fields
• Built like a tank to handle the most rigorous touring demands
• 10-year warranty

Specs:

• Input Impedance 5MΩ
• Output Load D.I. 2kΩ or more
• Output Load Amp Out 2kΩ or more
• Line In Impedance 15kΩ
• Dim. Metric 220 x 145 x 40/65 mm (WxDxH)
• Dim. Imperial 8.66” x 5.71″ x 1.57″/2.56″ (WxDxH)
• Weight 1.5 kg / 3 lbs. 5 oz
• Power 12VDC @ 200mA – center negative

Oct 29, 2025

edited Caveman Audio BC1 Bass Compressor

Added brand. Added item description. Improved item image. Improved item category.

Revised item description. Show revisions
Before:
After:
The BC1 Bass Compressor by Caveman Audio.

The BC1 is a Completly Analog Compressor Handbuild made in Denmark.

A Boost circuit is not common on compressor pedals, but then again, BC1 is a different beast !
As mentioned, we recommend using BC1 as a master compressor at the end of your signal chain, which might have left you with a problem.
You’d probably kick in a boost pedal for that, but since BC1 is sitting after a boost pedal, the signal coming into BC1 would be hotter, and BC1 would simply compress more.
That is why we have both LEVEL and BOOST controls. Use LEVEL to set the overall output level.
Set the BOOST control a bit higher and it will give you a level boost when you kick it in – but without changing the amount of compression !

When compressing your entire sound, you compress much less.
Therefore, you need a longer attack time than most comp pedals can provide in order to avoid killing the dynamics in your playing.
We want the compressor to help you to sit better in the mix by making the output from each string more even.
We don’t want it to kill your dynamic playing.
BC1 offers up to 25ms before the compressor kicks in, which leaves the precious transients of your tone intact. Those transients are often referred to as ‘definition’, and you don’t want to lose that !
That said, you can easily go below 25ms, and if you want to create a hard-pumping compressor effect, BC1 can take you all the way down to 0.1ms.

Selected Components And Screened Cables • All components are carefully selected to ensure superior sonic quality • All audio cables inside are high-quality screened cables only • All PCB circuit boards are Gold-plated for best performance

Zinc-Plated Steel Chassis • Protects against RFI, electric and magnetic fields • Built like a tank to handle the most rigorous touring demands • 10-year warranty

Specs:

• Input Impedance 5MΩ
• Output Load D.I. 2kΩ or more
• Output Load Amp Out 2kΩ or more
• Line In Impedance 15kΩ
• Dim. Metric 220 x 145 x 40/65 mm (WxDxH)
• Dim. Imperial 8.66” x 5.71″ x 1.57″/2.56″ (WxDxH)
• Weight 1.5 kg / 3 lbs. 5 oz
• Power 12VDC @ 200mA – center negative
Set Analog/Digital to analog
Set Power to 9V

Oct 29, 2025

edited G. Houghton & Sons The Marvel Banjolele

Improved item description.

Revised item description. Show revisions
Before:
The Marvel Banjolele by G. Houghton & Sons.

A Vintage Banjolele made in the 1930s.

Specs:

• Marvel Series • 4-String: G-C-E-A • Vellum Head • Short Scale Banjolele 13 "
• Rim/Pot diameter: ~8¼″ to ~9″ • Vintage friction-type Tuners • Metal Hoops/Brackets • Birch Neck and Body
• Open Back and Metal Resonator Back
• Tone Ring Inside • Body encased in Chrome
• Made in Birmingham, England

After:
The Marvel Banjolele by G. Houghton & Sons.

A Vintage Banjolele made in the 1930s.

Specs:

• Marvel Series
• 4-String: G-C-E-A
• Vellum Head
• Short Scale Banjolele 13 "
• Rim/Pot diameter: ~8¼″ to ~9″
• Vintage friction-type Tuners
• Metal Hoops/Brackets
• Birch Neck and Body
• Open Back and Metal Resonator Back
• Tone Ring Inside
• Body encased in Chrome
• Made in Birmingham, England

Oct 29, 2025

edited Kiesel JBM4

Improved item description.

Revised item description. Show revisions
Before:
The JBM4 J-Bass by Kiesel.

Specs:

• Color: Vintage Cream • Alder body with Vintage Cream satin finish and matching headstock
• Roasted Maple neck with Rosewood Fingerboard
• Mother of Pearl Inlays • Luminlay Side Dots • 22 frets (as series standard) Medium-Jumbo Stainless Steel
• Standard 34″ Scale Lenght • Custom Active Electronics with H50A stacked Alnico Humbuckers
• 2 Volume Controls • Drop Shadow Logo Gold • Pickguard Red Tortoise and Matching Truss Cover • High build quality, modern specs, but maintaining the “J-Style” heritage Body Shape

After:
The JBM4 J-Bass by Kiesel.

Specs:

• Color: Vintage Cream
• Alder body with Vintage Cream satin finish and matching headstock
• Roasted Maple neck with Rosewood Fingerboard
• Mother of Pearl Inlays
• Luminlay Side Dots
• 22 frets (as series standard) Medium-Jumbo Stainless Steel
• Standard 34″ Scale Lenght
• Custom Active Electronics with H50A stacked Alnico Humbuckers
• 2 Volume Controls
• Drop Shadow Logo Gold
• Pickguard Red Tortoise and Matching Truss Cover
• High build quality, modern specs, but maintaining the “J-Style” heritage Body Shape

Oct 29, 2025

edited Kiesel JBM4

Marked as Vintage or Discontinued. Improved item category. Improved item image. Added item description. Added brand.

Revised item description. Show revisions
Before:
After:
The JBM4 J-Bass by Kiesel.

Specs:

• Color: Vintage Cream • Alder body with Vintage Cream satin finish and matching headstock
• Roasted Maple neck with Rosewood Fingerboard
• Mother of Pearl Inlays • Luminlay Side Dots • 22 frets (as series standard) Medium-Jumbo Stainless Steel
• Standard 34″ Scale Lenght • Custom Active Electronics with H50A stacked Alnico Humbuckers
• 2 Volume Controls • Drop Shadow Logo Gold • Pickguard Red Tortoise and Matching Truss Cover • High build quality, modern specs, but maintaining the “J-Style” heritage Body Shape
Marked item as Vintage or Discontinued

Oct 29, 2025

edited G. Houghton & Sons The Marvel Banjolele

Marked as Vintage or Discontinued. Improved item category. Improved item image. Added item description. Added brand.

Revised item description. Show revisions
Before:
After:
The Marvel Banjolele by G. Houghton & Sons.

A Vintage Banjolele made in the 1930s.

Specs:

• Marvel Series • 4-String: G-C-E-A • Vellum Head • Short Scale Banjolele 13 "
• Rim/Pot diameter: ~8¼″ to ~9″ • Vintage friction-type Tuners • Metal Hoops/Brackets • Birch Neck and Body
• Open Back and Metal Resonator Back
• Tone Ring Inside • Body encased in Chrome
• Made in Birmingham, England
Marked item as Vintage or Discontinued

Oct 29, 2025

edited Avon Rose Morris 0405 LP

Marked as Vintage or Discontinued. Improved item category. Improved item image. Added item description. Added brand.

Revised item description. Show revisions
Before:
After:
The 0405 LP by Avon Rose Morris made in Japan (MIJ)

Japanese made Les Paul Style Guitar in Black Gloss.

Specs:

Scale length: 24.75″
Bolt-on neck (rather than set-neck)
Rosewood fretboard (22 frets)
Single cutaway “Les Paul style” body
Two humbucker-style pickups
Tune-o-matic style bridge + stop-bar tailpiece
Chrome hardware, machine heads 3+3
Japanese export build, circa 1970s
Marked item as Vintage or Discontinued

Oct 29, 2025

edited FGN Shimamura Music History CV-BJ4 Custom Bass

Marked as Vintage or Discontinued.

Marked item as Vintage or Discontinued

Oct 28, 2025

edited FGN Shimamura Music History CV-BJ4 Custom Bass

Added brand. Added item description. Improved item image. Improved item category.

Revised item description. Show revisions
Before:
After:
The CV-BJ4 Custom Bass by FGN Shimamura Music branded History made in Japan (MIJ).

Specs:

• Company Fujigen FGN Shimamura Music
• Brand History
• Model CV-BJ4-R
• Color: Tobacco Sunburst
• Categories: 4-string
• Type J-Bass
• Year: 2019
• Made in Japan
• Fingerboard Material: Rosewood
• Right/Left Handed
• For Right-Handed Players
• 2x Passive Pickups , Single Coil
• Neck Material: Maple
• Top Wood: Solid Wood
• Body Shape: J-Style
• Finish Style: Gloss
• Body Material: Alder
• Number of Strings: 4-string
• Scale Length: 34 inches

Oct 28, 2025

edited FGN Shimamura Music History TH-BJ4 Custom Bass

Improved item description. Added brand. Improved item name.

Revised item name. Show revisions
Before:
Shimamura Music History TH-BJ4 Bass Custom
After:
FGN Shimamura Music History TH-BJ4 Custom Bass
Revised item Brand. Show revisions
Before:
After:
FGN
Revised item description. Show revisions
Before:
?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

Body Alder 2P Neck Heritage Wood Hard Maple 1P Fingerboard Rosewood/250mmR Frets C.F.S.20F/JESCAR FW47095-NS Scale 864mm Strings D’Addario EXL165 Long Scale(045-105) Neck Joint Bolt-on(Fast Action Joint) Pegs GOTOH GB-2 Nut Oil Soak Cow Bone(Width:38mm) Front pickup HISTORY HBJ-1/n Rear pickup HISTORY HBJ-1/b Controls 2VOL(CTS),1Tone(CTS) Lead Cable Cloth Wire Condenser Orange Drop 0.047?F Output jack Switchcraft Bridge KTS PR-03SPWB1 Color 3Tone Sunburst(3TS) Vintage White(VWH) Dark Lake placid Blue(DLB) Accessories Hard Case Warranty 1Year

After:
The TH-BJ4 Custom Bass by FGN Shimamura Music History branded History made in Japan

Specs:

• Body Alder 2P
• Neck Heritage Wood Hard Maple 1P
• Fingerboard Rosewood/250mmR
• Frets C.F.S.20F/JESCAR FW47095-NS
• Scale 864mm
• Strings D’Addario EXL165 Long Scale(045-105)
• Neck Joint Bolt-on(Fast Action Joint)
• Pegs GOTOH GB-2
• Nut Oil Soak Cow Bone(Width:38mm)
• Front pickup HISTORY HBJ-1/n
• Rear pickup HISTORY HBJ-1/b
• Controls 2VOL(CTS),1Tone(CTS)
• Lead Cable Cloth Wire
• Condenser Orange Drop 0.047?F
• Output jack Switchcraft
• Bridge KTS PR-03SPWB1
• Color 3Tone Sunburst(3TS)
• Vintage White(VWH)
• Dark Lake placid Blue(DLB)
• Accessories Hard Case
• Warranty 1Year

Oct 28, 2025

edited Donner DJP-1000 Electric Jazz Guitar

Added brand. Added item description. Improved item image. Improved item category.

Revised item description. Show revisions
Before:
After:
The DJP-1000 Electric Jazz Guitar by Donner.

Jazz body, Classic F-holes and 2x Humbuckers in the Stlye of a Semi-Hollow Gibson 355.

Specs:

• Body Finish High Gloss
• Body Shape Jazz Semi-Hollow with F-holes
• Body Binding White
• Neck Construction Set-in neck
• Neck Finish High Gloss
• Neck Shape Rounded C
• Scale Length 628 mm
• Fingerboard Material Rosewood
• Fingerboard Radius R400
• Number of Frets 22F
• Fret Size Medium Jumbo
• Nut Material Synthetic Bone
• Nut Width 42mm
• Position Inlays ABS White Blocks Inlays
• Side Dots ABS Black
• Truss Rod DUAL ACTION
• Bridge Pickup Humbucker
• Neck Pickup Humbucker
• Controls 2 Volume，2 Tone with Push/Pull on Tone Control
• Switching 3-way toggle pickup switch
• Configuration HH
• Auxillary Switching Push/Pull on Tone Control
• Hardware Finish Chrome
• Tuning Machines Closed die-cast machine heads
• Pickguard Black
• Control Knobs Black
• Switch Tip /
• Neck Plate /
• Miscellaneous Strings Daddario .010 - .046
• Accessories Included Comes with Bag, Strap, Allen Wrench, Cable.

Oct 28, 2025

edited Watkins WEM Custom Srarfinder 212VF 1967

Improved item category. Improved item image. Added item description. Added brand.

Revised item description. Show revisions
Before:
After:
The Custom Srarfinder 212VF 1967 by WEM (Watkins Electric Music).

The “Starfinder” name was used by WEM/Watkins for their speaker cabinets starting in the mid-1960s.
For example, a listing for a mid-‘60s Starfinder 2×12 cabinet (1964-66) describes Goodmans Audiom 61 speakers in the unit.
WEM gear has a following because of its use by British rock acts and the rugged road-worthy design; the “Starfinder” cabinets in particular are sought after for the look and tone.

Custom Speaker Choice:
• Configuration: 2 × 12″ speakers (vertical format: the “VF” stands for “Vertical Format” or “vertical” orientation) for the 212VF version.
• Speakers: Stock version uses Custom Hiwatt Fane F75 12″ speakers (~75 W each).
• Upgrade version offers Fane Purpleback 12″ (~150 W each) in the listing.
• Power handling: For the F75 version: ~150 W total (2 × 75W).
• For the Purpleback upgrade: ~300 W total (2 × 150W).

• Cabinet construction: 18 mm birch plywood (or birch‐ply) is specified for the reproduction/custom units.
• Dimensions ~ Height: 683mm (~27″), Width: 540mm (~22″), Depth: 290mm (~12″) for the 212VF model.
• Historically accurate dimensions/materials, hand‐wired/custom shop construction, speakers mounted low in the cabinet to enhance low-end response.
• Input: ¼″ Mono Amplifier Input.
• Featuring a pair of 12 inch Fane Speakers, this 212 Cabinet can handle 150w of power (300w when upgraded to Purplebacks) and deliver all the clean Headroom anyone could want.

Historically accurate dimensions and materials.
• 18mm Birch Ply for sound resonance and acoustic properties.
• Tour ready with Legendary WEM durability.
• 🇬🇧 Engineered to handle more volume and more power without "shaking".
• Traditional WEM badge and hand-punched and hand-numbered Serial Plate.
• Exclusively Engineered and manufactured Speaker pairings.
• Speakers mounted low in the Cabinet for increased low-end response.
• Handwired & professionally tested in the 🇬🇧 WEM Custom Shops.

Specs:

• input 1/4" Mono Amplifier Input
• height683mm (~27")
• width540mm (~22")
• depth290mm (~12")
• weight25.65 Kg (~57 lbs)
• Road Ready — Rugged 18mm Birch-Ply Construction
• Band Ready — ’Soak Tested’ by our Custom Shop Technicians

Oct 28, 2025

edited Challenge VP Bass

Added brand. Added item description. Improved item image. Improved item category.

Revised item description. Show revisions
Before:
After:
The Bass Sunburst by Challenge VP.

An E-Bass in Style of the legendary Höfner H500/1 Artist Violin Bass.
The Challenge VP Bass has a Maple Laminate Body, Rounded Maple Neck, Rosewood Fingerboard, Sealed Tuners, Original Single Coils Pickups, Incl. Non-Original Fender Gigbag.

Specs:

• Brand : Challenge
• Model : VP Bass
• Colour : Sunburst
• Body Shape : Violin
• Body : Maple Laminate
• Neck : Maple
• Neck Profile : Rounded
• Fingerboard : Rosewood
• Fingerboard Inlays : Dots
• Scale Length : 30"
• Tuners : Sealed
• Pickups : Original Single Coils
• Controls : 2-Way Pickup Selector, On/Off for Each Pickup, 2x Volume
• No. of Strings : 4
• Case/Gigbag : Non-Original Fender Gigbag

Oct 28, 2025

edited Templo Devices Wave Function Tremolo

Improved item category.

Set Bypass to true bypass, buffered bypass

Oct 28, 2025

edited Templo Devices Wave Function Tremolo

Improved item category. Improved item image. Added item description. Added brand.

Revised item description. Show revisions
Before:
After:
The Wave Function Tremolo by Templo Devices.

The Wave DFunction is a classic with a modern spin an analog optical tremolo circuit and added some extra features for maximum versatility.
Equipped with the standard Speed and Depth controls, the Wave Function takes things even further with precise wave shaping functions:

• Speed: Control the speed of the pulsations
• Depth: Control how deeply the volume is attenuated (how subtle the effect is)
• Shape: choose either Square or Triangle wave
• Ramp: Have the signal fade on and off smoothly, or either go quickly on and fade off, or quickly off and fade on
• Symmetry: Sets the ratio of ON to OFF of the wave. Clockwise, signal is ON for longer than it is OFF, in center position it is equally ON/OFF, and in the counter-clockwise position, it is OFF longer than on. This gives unique pulsing character to the trem.

As well as these versatile wave shaping functions, I have also added some new ideas:

• Half Switch (Latching): Using the half footswitch, you can cut the speed in half, or double it, while keeping the same tempo
• Half Switch (Momentary) By holding the footswitch, you can slowly fade the tremolo to a stop
• Follow: When a solid note is struck the tremolo pauses to let the note ring out and comes back as the note fades away, to effectively only have tremolo on the tail of your notes.

The circuit is all analog and uses LED lights to control the signal.
With a warm tone and luscious tremolo, the Wave Function is sure to please fans of vintage tube trem, as well as modern experimentalists.

• Runs on standard center negative 9V pedal power, top mount jacks.
• Power consumption: ~17 mA
• Buffered bypass, soft touch switching.
Set Bypass to true bypass
Set Analog/Digital to analog
Set Mono/Stereo to mono
Set Power to 9V

Oct 28, 2025

edited Benson x Milkman Sound The Amp 100-watt Tube Amplifier Pedal

Added item description. Improved item image. Improved item category. Added brand.

Revised item description. Show revisions
Before:
After:
The Benson Amps is a 100-watt Tube Amplifier Pedal in cooperation with Milkman Amplifiers.

Milkman and Benson have teamed up to create Benson The Amp, a convenient and portable solution for those wishing to achieve the Benson sound in a portable and versatile form factor.
At its core Benson The Amp takes the high voltage tube preamp circuit of the Monarch/Chimera amplifiers and couples it to Class D 100 watt power amp which boasts enough power for any situation. It features appropriate effects like a gain boost, a spring reverb, a "room" control and an analog cab sim for direct recording or silent stages.

Benson The Amp also shares many of the great features of The Amp series including a studio quality line output with cabinet simulation, pedal level output, speaker output, headphone output and universal power.
The BASS and TREBLE controls are from the Benson Chimera and Monarch preamp which are known for sounding good and useful at every setting.
The VOLUME control on Benson The Amp might break up sooner than you might be accustomed to.
ou can achieve natural tube breakup by setting VOLUME at higher settings and backing down the OUTPUT to normalize the volume level.
If distortion is not wanted or needed, simply turn the VOLUME level down and turn the OUTPUT up to compensate for volume.
REVERB is a DSP spring reverb sound developed especially for Benson/Milkman by Keeley Electronics. REVERB is foot-switchable on the top of the unit.
The ROOM effect gives life to direct recording or guitar on silent stages.
It mimics the early reflections from an amp sound in a nice room or studio and livens up the signal and improves the feeling of playing guitar without the benefit of a cranked speaker behind you.
There are internal trim pots (behind the right wood side panel) to change this reflection time to achieve a slower slap back effect.
If the room effect is not wanted or needed you can adjust the setting to a standard slap back delay. Even though ROOM is intended to integrate with the cab sim output, it is also available to come out of the speaker cabinet as well.
The ROOM effect comes out of every output on Benson The Amp.
The BOOST is a clean opamp based signal boost before the tube preamp of Benson The Amp.
You can use it to overdrive (or further overdrive) the 12AX7 tube stages to get even more natural saturation if desired.
It is capable of a full 24 dB of boost. The BOOST is also foot-switchable.
The CAB SIM on the rear panel by the XLR output simulates a speaker cabinet for direct recording or silent stages.
Benson captured their favorite mic'd up cabinet frequency response of their oversized 1x12 cabinet loaded with a Benson Ceramic 30 speaker with an AEA N22 ribbon microphone in front and emulated this sound using a no-latency analog circuit.
CAB SIM can be bypassed on the rear panel via a toggle switch. 

High voltage tube preamp circuit of the Benson Monarch/Chimera amps coupled to a Class D 100 watt power amp which boasts enough power for any situation
• BASS and TREBLE controls are from the Benson Chimera and Monarch preamp
• Use VOLUME and OUTPUT controls to set appropriate gain from clean to tube amp drive
• Foot-switchable DSP spring reverb sound developed especially for Benson/Milkman by Keeley Electronics
• ROOM effect mimics the early reflections from an amp sound in a room with internal trim pots to change this reflection time
• Opamp based signal boost before the tube preamp that can overdrive the 12AX7 tube stages up to a full 24 dB of gain
• CAB SIM on the rear panel by the XLR output simulates a speaker cabinet for direct recording or silent stages

Specs:

• Condition New
• Width 8.5 in
• Height 3 in
• Depth 6.5 in
• Unit Weight 2.5 lb
• Input Connectors 1/4-inch TS
• Output Connectors Speakon, 1/4-inch TS, Analog XLR
• Amp Wattage 50 W (16 ohm output); 100 W (8 ohm output); 200 W (4 ohm output)

Oct 28, 2025

edited Donner KB-32M

Improved item description.

Revised item description. Show revisions
Before:
The KB-32M Portable MIDI Keyboard Controller by Donner.

The KB-32M is a MIDI & Synth Seamless Portable MIDI Controller for ESSENTIAL L1.
The Donner KB-32M Portable MIDI Keyboard Controller introduces a sleek and cable-free workflow with its Snap2Connect magnetic interface, designed to pair instantly with the Donner ESSENTIAL L1 Synthesizer — no wires or external power required.
• 32-Key Synth-Action Keyboard: Spring-loaded keys with three velocity levels ensure expressive performance for any playing style.
• Smart Control Hub: An intuitive OLED display paired with SHIFT-function keys offers rapid access to all system parameters.
• Universal Connectivity: Equipped with USB-MIDI and standard MIDI ports for seamless integration with PCs, DAWs, and mobile devices.

The Donner ESSENTIAL L1 Synthesizer delivers warm monophonic tones using classic 3340 VCO and 3109 VCF circuits, while pushing creativity forward with its advanced 64-step sequencer.
• Modular via Snap2Connect: Instantly switch between desktop and keyboard setups with magnetic flexibility. • Advanced Modulation: Dual ADSR envelope generators and a syncable LFO allow for deep, dynamic sound design. • Creative Engine Built-In: The 64-step sequencer, 5-mode arpeggiator, and SONG mode enable on-the-fly composition and live performance possibilities.

Together, the KB-32M and ESSENTIAL L1 form a highly portable, all-in-one synth workstation.
The Snap2Connect system allows musicians to link the two devices into a compact, mobile rig , ideal for studio sessions, live jams, or on-the-go creativity.
• Magnetic Workflow: The KB-32M powers and controls the L1 via magnetic contact, no setup, just play.
• Instant Inspiration: Send sequencer patterns directly into your DAW and compose in real time without menu-diving.

The pairing of the Donner KB-32M MIDI Controller with the ESSENTIAL L1 Synthesizer offers UK-based musicians a fully modular, high-performance synth solution.
From hands-on MIDI control to retro-flavoured analog tones and deep sequencing capabilities, this combo is ideal for home studios, live sets, and mobile production rigs alike.

After:
The KB-32M Portable MIDI Keyboard Controller by Donner.

The KB-32M is a MIDI & Synth Seamless Portable MIDI Controller for ESSENTIAL L1.
The Donner KB-32M Portable MIDI Keyboard Controller introduces a sleek and cable-free workflow with its Snap2Connect magnetic interface, designed to pair instantly with the Donner ESSENTIAL L1 Synthesizer — no wires or external power required.
• 32-Key Synth-Action Keyboard: Spring-loaded keys with three velocity levels ensure expressive performance for any playing style.
• Smart Control Hub: An intuitive OLED display paired with SHIFT-function keys offers rapid access to all system parameters.
• Universal Connectivity: Equipped with USB-MIDI and standard MIDI ports for seamless integration with PCs, DAWs, and mobile devices.

The Donner ESSENTIAL L1 Synthesizer delivers warm monophonic tones using classic 3340 VCO and 3109 VCF circuits, while pushing creativity forward with its advanced 64-step sequencer.
• Modular via Snap2Connect: Instantly switch between desktop and keyboard setups with magnetic flexibility.
• Advanced Modulation: Dual ADSR envelope generators and a syncable LFO allow for deep, dynamic sound design.
• Creative Engine Built-In: The 64-step sequencer, 5-mode arpeggiator, and SONG mode enable on-the-fly composition and live performance possibilities.

Together, the KB-32M and ESSENTIAL L1 form a highly portable, all-in-one synth workstation.
The Snap2Connect system allows musicians to link the two devices into a compact, mobile rig , ideal for studio sessions, live jams, or on-the-go creativity.
• Magnetic Workflow: The KB-32M powers and controls the L1 via magnetic contact, no setup, just play.
• Instant Inspiration: Send sequencer patterns directly into your DAW and compose in real time without menu-diving.

The pairing of the Donner KB-32M MIDI Controller with the ESSENTIAL L1 Synthesizer offers UK-based musicians a fully modular, high-performance synth solution.
From hands-on MIDI control to retro-flavoured analog tones and deep sequencing capabilities, this combo is ideal for home studios, live sets, and mobile production rigs alike.

Oct 28, 2025

edited Donner KB-32M

Added brand. Added item description. Improved item image. Improved item category. Improved item image. Added item description. Added brand. Improved item category.

Revised item description. Show revisions
Before:
After:
The KB-32M Portable MIDI Keyboard Controller by Donner.

The KB-32M is a MIDI & Synth Seamless Portable MIDI Controller for ESSENTIAL L1.
The Donner KB-32M Portable MIDI Keyboard Controller introduces a sleek and cable-free workflow with its Snap2Connect magnetic interface, designed to pair instantly with the Donner ESSENTIAL L1 Synthesizer — no wires or external power required.
• 32-Key Synth-Action Keyboard: Spring-loaded keys with three velocity levels ensure expressive performance for any playing style.
• Smart Control Hub: An intuitive OLED display paired with SHIFT-function keys offers rapid access to all system parameters.
• Universal Connectivity: Equipped with USB-MIDI and standard MIDI ports for seamless integration with PCs, DAWs, and mobile devices.

The Donner ESSENTIAL L1 Synthesizer delivers warm monophonic tones using classic 3340 VCO and 3109 VCF circuits, while pushing creativity forward with its advanced 64-step sequencer.
• Modular via Snap2Connect: Instantly switch between desktop and keyboard setups with magnetic flexibility. • Advanced Modulation: Dual ADSR envelope generators and a syncable LFO allow for deep, dynamic sound design. • Creative Engine Built-In: The 64-step sequencer, 5-mode arpeggiator, and SONG mode enable on-the-fly composition and live performance possibilities.

Together, the KB-32M and ESSENTIAL L1 form a highly portable, all-in-one synth workstation.
The Snap2Connect system allows musicians to link the two devices into a compact, mobile rig , ideal for studio sessions, live jams, or on-the-go creativity.
• Magnetic Workflow: The KB-32M powers and controls the L1 via magnetic contact, no setup, just play.
• Instant Inspiration: Send sequencer patterns directly into your DAW and compose in real time without menu-diving.

The pairing of the Donner KB-32M MIDI Controller with the ESSENTIAL L1 Synthesizer offers UK-based musicians a fully modular, high-performance synth solution.
From hands-on MIDI control to retro-flavoured analog tones and deep sequencing capabilities, this combo is ideal for home studios, live sets, and mobile production rigs alike.

Oct 28, 2025

edited Trevor James "The Horn" Alto Saxophone

Improved item description.

Revised item description. Show revisions
Before:
The The Horn Alto Saxophone by Trevor James.

The Horn Alto Saxophone is back for 2020 and is now enhanced for the 21st century.
The latest edition of the original award winning TJ Horn sax design of the late 1980s, this ergonomically enhanced sax will help you develop your own sound and encourage you to further explore the instrument.
The Horn is an excellent high end first sax for the new and improving player.
The TJ Horn Alto saxophone is built using the highest quality materials and further quality-checked at our technical workshops in Lenham (U.K) by a dedicated team of technicians before making its way to you.
If you have ever wanted to learn the saxophone, but havent a clue where to start, this is the sax for you; with fantastic intonation and accurate, solid construction.
A smooth, fluent action will allow you to move around the instrument with ease.

• Key: E-flat. Range: Bb3 to F#5 (Concert Pitch: Db3 to A5)
• Free blowing - Supports the players air flow when playing, essential for students
• Thumb Rests: Plastic upper, metal adjustable lower, so your hand can fit comfortably
• Blue steel needle springs Allowing for a smoother action
• Plastic Touch pieces
• Leather Pads
• Metal Reflectors allowing for a clear, brighter response and easier air flow throughout the instrument
• Floral engraving on the side of the bell
• TJ Plastic Mouthpiece Great starter mouthpiece
• Metal 2-Screw ligature Best starter ligature, holding the reed on tightly to the mouthpiece.
• Complete with a cap
• Accessories: Reeds, Comfortable Neck Sling, Polishing Cloth

After:
The Horn Alto Saxophone by Trevor James.

The Horn Alto Saxophone is back for 2020 and is now enhanced for the 21st century.
The latest edition of the original award winning TJ Horn sax design of the late 1980s, this ergonomically enhanced sax will help you develop your own sound and encourage you to further explore the instrument.
The Horn is an excellent high end first sax for the new and improving player.
The TJ Horn Alto saxophone is built using the highest quality materials and further quality-checked at our technical workshops in Lenham (U.K) by a dedicated team of technicians before making its way to you.
If you have ever wanted to learn the saxophone, but havent a clue where to start, this is the sax for you; with fantastic intonation and accurate, solid construction.
A smooth, fluent action will allow you to move around the instrument with ease.

• Key: E-flat. Range: Bb3 to F#5 (Concert Pitch: Db3 to A5)
• Free blowing - Supports the players air flow when playing, essential for students
• Thumb Rests: Plastic upper, metal adjustable lower, so your hand can fit comfortably
• Blue steel needle springs Allowing for a smoother action
• Plastic Touch pieces
• Leather Pads
• Metal Reflectors allowing for a clear, brighter response and easier air flow throughout the instrument
• Floral engraving on the side of the bell
• TJ Plastic Mouthpiece Great starter mouthpiece
• Metal 2-Screw ligature Best starter ligature, holding the reed on tightly to the mouthpiece.
• Complete with a cap
• Accessories: Reeds, Comfortable Neck Sling, Polishing Cloth

Oct 28, 2025

edited Trevor James "The Horn" Alto Saxophone

Improved item category. Improved item image. Added item description. Added brand.

Revised item description. Show revisions
Before:
After:
The The Horn Alto Saxophone by Trevor James.

The Horn Alto Saxophone is back for 2020 and is now enhanced for the 21st century.
The latest edition of the original award winning TJ Horn sax design of the late 1980s, this ergonomically enhanced sax will help you develop your own sound and encourage you to further explore the instrument.
The Horn is an excellent high end first sax for the new and improving player.
The TJ Horn Alto saxophone is built using the highest quality materials and further quality-checked at our technical workshops in Lenham (U.K) by a dedicated team of technicians before making its way to you.
If you have ever wanted to learn the saxophone, but havent a clue where to start, this is the sax for you; with fantastic intonation and accurate, solid construction.
A smooth, fluent action will allow you to move around the instrument with ease.

• Key: E-flat. Range: Bb3 to F#5 (Concert Pitch: Db3 to A5)
• Free blowing - Supports the players air flow when playing, essential for students
• Thumb Rests: Plastic upper, metal adjustable lower, so your hand can fit comfortably
• Blue steel needle springs Allowing for a smoother action
• Plastic Touch pieces
• Leather Pads
• Metal Reflectors allowing for a clear, brighter response and easier air flow throughout the instrument
• Floral engraving on the side of the bell
• TJ Plastic Mouthpiece Great starter mouthpiece
• Metal 2-Screw ligature Best starter ligature, holding the reed on tightly to the mouthpiece.
• Complete with a cap
• Accessories: Reeds, Comfortable Neck Sling, Polishing Cloth

Oct 28, 2025

edited Raffaele Maratea Mandolin

Marked as Vintage or Discontinued. Improved item category. Improved item image. Added item description. Added brand.

Revised item description. Show revisions
Before:
After:
The Vintage Mandolin by Raffaele Maratea made in Italy, Naples.

Raffaele Maratea is the son of Domenico and Michele Maratea, Italian makers of stringed instruments and particularly of mandolins in Naples during the end of the 19th century.
A student of the Vinaccias, he was awarded a diploma of honor at the Universal Exhibition in Turin in 1898.
Then installed in his workshop at 40 rue Portapiccola Montecalvario, it was around 1900 that he made this very pretty mandolin.
Among other things, he made mandolins to export them to France under the Mircutian brand: La Divina.
Here, this is the case for this mandolin since a peeled "La Divina" label was found inside the mandolin.
This model is perfectly comparable and almost similar to the model with hollow dimensions also presented for sale.
We fully recognize the Vinaccia inspiration in this mandolin made with great skill.

Specs:

• Top: Spruce
• Back: 27 rosewood ribs
• Neck: Ebony Veneer
• Fingerboard: Ebony (concert fingerboard)
• Nut Width: 26.5mm
• Radius: Flat
• Frets: 25 frets
• Scale length: 330 mm
• Profile: Neapolitan
• Pickguard: Tortoiseshell inlaid with arabesque patterns in white mother-of-pearl
• Country of Manufacture: Italy, Naples
• Year: 1900's
• Finish: Natural

Decorations: White mother-of-pearl pistagne on the edge of the table / Inlays of interlaced wave patterns in white mother-of-pearl on the edge of the table / Inlays of "F" pattern in white mother-of-pearl on the rosette / Mandorla-shaped fingerboard markers in white mother-of-pearl / White mother-of-pearl mechanical eyelets / Maple and ebony purfling on the edge of the table and rosette

Powerful and balanced, with a typical Neapolitan timbre and a pleasant action, this mandolin will be perfect for a concert mandolinist.
Marked item as Vintage or Discontinued

Oct 28, 2025

edited Mahalo U320C Concert Ukulele

Improved item description.

Revised item description. Show revisions
Before:
The U320C Concert Ukulele by Mahalo Ukuleles.

The Mahalo U320C has a warm, rich tone thanks to its all mahogany body.
It also features a rosewood fretboard fitted to a nato neck.
Tuning is stable and accurate thanks to a set of quality geared, gold plated machine heads.
Aquila strings have also been used for enhanced tones and tuning stability.

Specs:

• Brand Mahalo
• Colour Burgundy
• Instrument Ukulele • Operation Mode Acoustic
• String material type Nylon
• Top material type Mahogany
• Back material type Mahogany
• Finish type Polished
• Number of strings 4
• Weight 0.78 Kilograms

After:
The U320C Concert Ukulele by Mahalo Ukuleles.

The Mahalo U320C has a warm, rich tone thanks to its all mahogany body.
It also features a rosewood fretboard fitted to a nato neck.
Tuning is stable and accurate thanks to a set of quality geared, gold plated machine heads.
Aquila strings have also been used for enhanced tones and tuning stability.

Specs:

• Brand Mahalo
• Colour Burgundy
• Instrument Ukulele
• Operation Mode Acoustic
• String material type Nylon
• Top material type Mahogany
• Back material type Mahogany
• Finish type Polished
• Number of strings 4
• Weight 0.78 Kilograms

Oct 28, 2025

edited Mahalo U320C Concert Ukulele

Improved item description.

Revised item description. Show revisions
Before:
The U320C Concert Ukulele by Mahalo Ukuleles.

The Mahalo U320C has a warm, rich tone thanks to its all mahogany body.
It also features a rosewood fretboard fitted to a nato neck.
Tuning is stable and accurate thanks to a set of quality geared, gold plated machine heads.
Aquila strings have also been used for enhanced tones and tuning stability.

Specs:

• Brand Mahalo
• Colour Burgundy
• Top material type Mahogany
• Back material type Mahogany
• String material type Nylon
• Finish type Polished
• Instrument Ukulele
• Item weight 0.78 Kilograms
• Operation mode acoustic
• Number of strings 4

After:
The U320C Concert Ukulele by Mahalo Ukuleles.

The Mahalo U320C has a warm, rich tone thanks to its all mahogany body.
It also features a rosewood fretboard fitted to a nato neck.
Tuning is stable and accurate thanks to a set of quality geared, gold plated machine heads.
Aquila strings have also been used for enhanced tones and tuning stability.

Specs:

• Brand Mahalo
• Colour Burgundy
• Instrument Ukulele • Operation Mode Acoustic
• String material type Nylon
• Top material type Mahogany
• Back material type Mahogany
• Finish type Polished
• Number of strings 4
• Weight 0.78 Kilograms

Oct 28, 2025

edited Mahalo U320C Concert Ukulele

Improved item image. Improved item description.

Revised item description. Show revisions
Before:
The U320C Concert Ukulele by Mahalo Ukuleles.

Specs:

• Brand Mahalo
• Colour Burgundy
• Top material type Mahogany
• Back material type Mahogany
• String material type Nylon
• Finish type Polished
• Instrument Ukulele
• Item weight 0.78 Kilograms
• Operation mode acoustic
• Number of strings 4

After:
The U320C Concert Ukulele by Mahalo Ukuleles.

The Mahalo U320C has a warm, rich tone thanks to its all mahogany body.
It also features a rosewood fretboard fitted to a nato neck.
Tuning is stable and accurate thanks to a set of quality geared, gold plated machine heads.
Aquila strings have also been used for enhanced tones and tuning stability.

Specs:

• Brand Mahalo
• Colour Burgundy
• Top material type Mahogany
• Back material type Mahogany
• String material type Nylon
• Finish type Polished
• Instrument Ukulele
• Item weight 0.78 Kilograms
• Operation mode acoustic
• Number of strings 4

Oct 28, 2025

edited Mahalo U320C Concert Ukulele

Added brand. Added item description. Improved item image. Improved item category.

Revised item description. Show revisions
Before:
After:
The U320C Concert Ukulele by Mahalo Ukuleles.

Specs:

• Brand Mahalo
• Colour Burgundy
• Top material type Mahogany
• Back material type Mahogany
• String material type Nylon
• Finish type Polished
• Instrument Ukulele
• Item weight 0.78 Kilograms
• Operation mode acoustic
• Number of strings 4

Oct 28, 2025

edited G. Houghton & Sons Melody Major Mandonlin-Banjo 1920s

Marked as Vintage or Discontinued.

Marked item as Vintage or Discontinued

Oct 28, 2025

edited G. Houghton & Sons Melody Major Mandonlin-Banjo 1920s

Added brand. Improved item name.

Revised item name. Show revisions
Before:
1920s G Houghton & Sons Melody Major Mandonlin-Banjo
After:
G. Houghton & Sons Melody Major Mandonlin-Banjo 1920s
Revised item Brand. Show revisions
Before:
After:
G. Houghton & Sons

Oct 28, 2025

edited Citronic CCM1 Condenser Microphone

Improved item category. Improved item image. Added item description. Added brand. Improved item name.

Revised item description. Show revisions
Before:
After:
The CCM1 Condenser Microphone by Citronic (Chord).

Studio cardioid condenser microphone with a single 32mm gold-sputtered diaphragm housed in a precision engineered alloy body and plated steel mesh. Operated by phantom power with a high grade FET preamp to provide an accurate, full range response for a wide range of acoustic sources.

Specs:

• Supplied with spider shock mount and carrying pouch
• 6dB 100Hz Lo cut switch inside lower housing
• High end studio quality performance
• Large gold-sputtered diaphragm
• Full audio spectrum response
• Power supply: +48V phantom power
• Frequency response: 20Hz-20kHz
• Capsule: 32mm gold-sputtered diaphragm
• Polar pattern: Cardioid
• Sensitivity: -36dB ± 2dB(odB=1v/Pa 1000Hz)
• Output impedance: 200 Ohms
• Equivalent noise level: 20dB (A-weighted)
• Maximum SPL125dB for 0.5% THD
• S/N ratio: 70dB
• Connector: 3-pin XLRM
• Dimensions: 152 x 49mmØ
• Weight: 340g

Oct 28, 2025

hashimoto's Activity