Pricing and availability
* Product prices and availability are updated by Equipboard every 24hrs and are subject to change. Equipboard may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. For more information, please refer to our affiliate disclosure.
Description
Elevate your sound experience with the Tapco Thump, a powerhouse of acoustics thoughtfully engineered by the masterminds behind Mackie's acclaimed loudspeakers. This versatile active loudspeaker is designed not just to meet, but to surpass your audio expectations with its exceptional sonic performance. With a wide frequency response from 20kHz down to 40Hz, it delivers a punchy bass and a crystal-clear high-end, ensuring that every note is felt and heard.
The Tapco Thump is more than just a speaker; it's a dynamic performer. Its two-way bass reflex design features a 15" woofer powered by a robust 150-watt amp, coupled with a 50-watt amp driving the 1" compression driver for smooth, wide dispersion. The integrated 3-band EQ allows you the flexibility to fine-tune your sound, whether you're looking to enhance the thump of a kick drum, add shimmer to hi-hats, or give vocals that extra pop.
Portability meets functionality with its lightweight, asymmetrical design, making it ideal for use as a monitor or a PA system. The Thump’s advanced Class D circuitry ensures efficient power usage and reduced heat output, preserving both performance and longevity. Built-in protections keep your investment safe, with thermal switches and transparent compression circuits guarding against overheating and transient peaks.
Key Features:
- 15" woofer with 150-watt power amp
- 1" compression driver with 50-watt power amp
- Two-way bass reflex design
- Integrated 3-band EQ with 15dB boost/cut
- Advanced Class D circuitry for efficient power usage
- Lightweight and portable design
- Thermal and transient peak protection for longevity
Product specs
| Frequency Range (-10 dB) | 40 Hz ” 20 kHz |
| Frequency Response (-3 dB) | 50 Hz ” 18.5 kHz |
| Horizontal Coverage Angle | 90 |
| Vertical Coverage Angle | 60 |
| Maximum SPL Long-Term | 113 dB SPL @ 1m |
| Maximum SPL Peak | 116 dB SPL @ 1m |
| Input Type | Female XLR Balance/Unbalanced |
| Input Impedance | 20 kOhms balanced bridging; 10 kOhms unbalanced |
| Loop-through | Male XLR Balanced/Unbalanced (parallel with input) |
| Level Control | Rotating knob, 0 dB at center |
| Sensitivity | +4 dBu for full output (Level Control @ center); -36 dBu for full output (Level Control @ max) |
| Low Frequency | 15" (381mm) with steel frame, paper cone woofer |
| High Frequency | Horn loaded 1" (25mm) exit compression driver. |
| Rated Power | 50 watts, 4-ohm load, 60 watts peak |
| THD | <0.1%Signal-to-Noise Ration: >-97 dB, 20 Hz to 20 kHz, unweighted, referenced to 50 watts into 4 ohms |
| Design | Class AB |
| Crossover Type | 24 dB/octave |
| Crossover Frequency | 3 kHz |
| Low Frequency EQ | ±15 dB @ 80 Hz, shelving |
| Mid Frequency EQ | ±15 dB, bandpass, sweepable from100 Hz to 8 kHz |
| High Frequency EQ | ±15 dB @ 12 kHz, shelving |
| Direct/EQ Switch | Bypasses EQ section |
| Over-excursion Protection | Second-order sub-sonic filter |
| Thermal Protection | Independent amplifier shutdown, auto reset |
| Driver Protection | Independent HF and LF compressors |
| U.S. | 120 VAC, 60 Hz |
| Europe | 240 VAC, 50 Hz |
| Korea | 220 VAC, 60 Hz |
| Japan | 100 VAC, 50/60 Hz |
| AC Connector | 3-pin IEC 250 VAC, 20 A male |
| Fuse | 115 VAC: T 3.15 AL/250 V; 230 VAC: T 2 AL/250 V |
| Power Consumption | 320 watts with music, loud mix; 20 watts quiescent (idle) |
| Basic Design | Asymmetrical Trapezoidal |
| Material | Polypropylene |
| Handles | One on each side, one on top |
| Grille | Perforated metal with weather-resistant coating |
| Display LEDS | Front: Power ON; Rear: Power ON, OL (overload) |
| Dimensions | 27.1"H x 16.8"W x 11.7"D (689x427x296mm) |
| Weight | 36 lbs. (16.3 kg) |
| Mounting Methods | Pole-mountable via the built-in socket on the bottom of the cabinet. Be sure the pole is capable of supporting the weight of the TH-15A |
Reviews
Owner Insights
We analyzed real musician discussions from forums and Reddit to find what players love, question, and tweak about Tapco thump.
Comparisons
-
The Peavey Dark Matter Series is said to sound better and cleaner than the Mackie Thumps, although they're not as loud.
Source -
Some users find the Tapco-branded Thumps, which predate Mackie's acquisition, to be more durable and perform better when not driven to peak levels.
Source -
The EV ELX200 series is considered a viable upgrade from the Mackie Thumps, with a compact 18" subwoofer that suits mobile DJs needing portability without compromising on sound quality.
Source
User experience
-
Owners report Mackie Thumps are prone to failure, with multiple instances of speakers blowing out unexpectedly.
Source -
A user described using a Mackie Thump 15 with the SRM Flex tower PA, noting improved sound when connected via the Flex DI out.
Source -
A user with experience in weekend sound gigs switched from Mackie Thumps to 1000W EV ZLX tops for better performance.
Source
Build quality
-
Some users find Mackie Thumps durable, using them for over a year without issues, although others report frequent failures.
Source
Use cases and applications
4.0 out of 5
Based on 1 Review and 1 Rating
