pkrul's Reviews

Relatively cheap solution for ground loops/phase problems in stereo setups.

When you play stereo with two amps, you definitely need something like this. It solves two problems: it gets rid of ground loop hums in a safe way by offering an isolated output. It also offers a phase reverse switch to counter phasing problems.

The Custom Pedal Boards Dau Split is a solution to the age old problem of “how do I split my signal into two and not get earth hum and phase issues”

Dau Split (pronounced Dai split) splits your signal from one into two, with the second output isolated with ground lift and phase reversal switches.

Both outputs are buffered with Robust, high quality TL072 op-amp ‘klon’ type transparent circuits, for improved signal quality, tone, and to prevent treble loss caused by long cable runs and true bypass effects.

Ideal for placing at the end of a mono signal chain to split to two amps, before a stereo pedal, at the start to split to a dry amp or parallel effects chain, in a loop of a loop switcher to split to a dry amp, plus many other uses.

As anyone that uses the Boss ES8 loop switcher knows, the 2nd output does not have ground lift or phase reversal. This means a possibility of thin sound and hum through second amp. The Dau Split solves this problem and enables you to run your signal in true stereo or 4CM with the ability to lift the ground and reverse the phase. Problem solved!

All CPB pedals and signal solutions are hand made in the UK using high quality components:

Aluminium enclosure Neutrik jack sockets High Quality 2 layer PCB with Panasonic and TDK caps Status LED 2.1mm 9v DC Socket @ 8mA 110x60x32mm

Great switcher, features come close to GigRig, but at a much lower price and with much smaller dimensions.

I really like the form factor, it does not consume half of my pedalboard, yet has a lot of functionality and 6 loops.

4 mono loops and 2 stereo loops, plus 1 volume loop Changeable loop order per each preset 2 Buffers, Input and Movable buffers 2 internal unity mixers/volume-controllers (Parallel, Carry Over routings or Volume Conrol) 641 preset memory locations 160 banks of 4 presets, plus a Global Preset 2 function control switches (Latched / Reverse Latched / Momentary / Tempo Sync) Mute and Click-Less functions Song and Set mode Create up to 480 songs Organized the 480 songs in to 60 sets of 48 songs 12 MIDI messages (PC, CC and Note) each preset 4 MIDI messages (PC, CC and Note) each switch 4 Audio actions each IA switch MIDI Time Clock or Alaog Tempo out for TAP-TEMPO One expression pedal port (global / per preset) 2 lines x 16 characters LCD display with blue backlight Easily copy presets, banks, songs and sets Easily name presets and songs Heavy-duty footswitches Powered by 9VDC(center negative) 200mA Dimensions : 320(W) x 96(D) x 68(H) mm 12.6(W) x 3.8(D) x 2.7(H) inches Weight : 1,130g / 2.5lbs

I actually own the Musicom Lab EFX LE II, which is different, but some weird censorship does not allow me to add it here.

I actually own the Musicom Lab EFX LE II, which is different, but some weird censorship does not allow me to add it here.

Amazing quality for a very low price.

This is a very well build guitar that sounds pretty good out of the box. It's so cheap you won't believe it.

Great for keeping Les Paul type guitars in tune

Designed for guitars with 3L/3R machine heads on the headstock Corrects the position of the A, D, G, B strings for a straight course through the nut grooves, preventing the guitar strings from getting becoming stuck in the nut Makes instruments more stable in tuning and more sustain-rich Keeps the tuning of the strings even with very intense guitar playing (also copes with extreme bending) Quick and easy to build Version V3 with minimum hole spacing 35 mm / maximum hole spacing 58 mm Colour: Black

Handy guitar stool with a built-in guitar stand.

With footrest and integrated guitar stand Ideal for guitarists 70 cm Seat height Guitar stand with 57 cm distance between the base at the bottom and the neck support Maximum load: 120 kg Weight: 3.8 kg Not suitable for permanent use with guitars with nitrocellulose lacquer

30 Watts Class D Power Amp, DI and Cab simulator in one pedal

Great little power amp that goes straight into a cabinet or to the Front of House. It is in my bag to use as a spare in case my tube amp malfunctions at a gig.

Class D Power Amp Single Channel (perfect pedal platform) Classic 3-Band EQ EQ Bypass Switch Volume Control Presence Control Bright Switch Built-In Cabinet Simulator DI Line Out Ground Lift Switch Mute Foot Switch DULO Tone Enhancer® Circuit

Great little Amp en Cab simulator for recording or straight to front-of-house.

This amp modeler is the real deal! The 16 models have covered from Fender Twin style crystal clean to the edge of break-up bite of Tweed, to the classic British roaring crunch, to modern monstrous hi-gain. And it's very cheap too!

The 16 amp models can cover basically all your tonal needs like California clean, British crunch, modern hi-gain.

The layout of controls is as simple as it can get. LOW, MID, HIGH, VOL., GAIN are as what they are on those real amps. The knobs are made of LED, which can well show the working state of the pedal. And they are very responsive. Meanwhile, this thing is built like a tank. The Aluminum-alloy die-cast casing withstands wear and tear.

Bonus Features: Coral Amp has a Cab Sim function with a LED light. If the Cab Sim LED night flashes, it means that's the Cab Sim is on. If it stays still, then it's off. The 16 amp models would be divided into 2 channels. You can use the footswitch to choose between channels. And if you hold the footswitch button, you can turn the pedal off. And it's buffer bypass.

Specifications: Power：9V DC center negative(not included) Current Consumption：200mA Dimensions：93.5mm(D)×42mm(W)×52mm (H); Weight：150g

This speaker really opened up my Fender Princeton '65 Reverb

Since this is a budget speaker, my expectations were not really high. But when I replaced the standard 10" speaker in my Fender Princeton Reverb '65 reissue FSR Paisley amp with this speaker, I was certainly not disappointed! Great speaker, "straight" sound, no colouring.

Another plus: it is very lightweight.

Great sound, great looks.

A really nice looking amp with a great tone. That is, if you hook it to a 12" speaker cabinet, the original 10" Alnico speaker sounds harsh and distorted.

It's very small and lightweight.

I replaced the 10" Jensen speaker with a 12" Celestion Seventy 80 budget speaker. I had to cut some wood on the inside to make it fit, but I ended up with a totally different amp. Sounds great now!

I replaced the Celestion Seventy 80 with a Celestion Vintage 30 and it sounds even better now (bit heavier though).

Great looking guitar

Very nice limited edition thinline. Satin black finish with gold hardware.

Great full range boost.

A lot of headroom, especially because of the internal 9 volts to 18 volts doubling. Really a clean boost.

Great less harsh and dead than the stock noiseless pickups

I replaced the N3 noiseless pickups on my American DeLuxe Telecaster with these babies.

Great investment! No longer the ice pick treble on the bridge pickup and a lot more dynamics. I take a little bit of noise any time before dead and flat sounding noiseless pups.

Great replacement for standard pickups

Lots of tone and output, still has the twang.

Great definition, very good in ears.

Very good in ears. All instruments ring through, thanks to 3 drivers. I use them with taylor made sleeves.

Pretty loud for a 5W guy.

Great little amp. Nice sounding reverb and the morphing between British and American mode is a nice touch. A lot of amp tha coes very cheap!

The best spring reverb

Tn my opinion, the best spring reverb on the market right now.

Part of a great modular power supply

The Distributor is one ofe the modules of The Gigrig modular power supply system. It delivers a huge amount of power to e.g. The Gigrig Isolators, who have 4 isolated power outputs each.

Delivers 550 mA of isolated power output

Part of a modular power supply system, the Timelord delivers a 550 mA isolated power output for power-hungry pedals.

4 isolated 135 mA power outputs per Isolator

The Isolator is part of The Gigrig's modular power supply. Connect the Isolator to a Distributor and you get 4 isolated power outputs, 135 mA each,