sakurauchi's Activity

Specifications Type 2-way nearfield studio reference monitor LF Driver 8-inch (203 mm), 70 W Kevlar curved cone with high temperature voice-coil and damped rubber surround, magnetically shielded HF driver 60 W Extended frequency range ribbon tweeter Frequency response 38 Hz - 22 kHz Crossover frequency 2.2 kHz Signal-to-noise ratio > 100 dB typical A-weighted Input connectors 1 XLR balanced, 1 TRS balanced/unbalanced Polarity positive signal at + produce outward cone displacement Input Impedance 20 k? balanced, 10 k? unbalanced Input sensitivity 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum Protection RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse Indicator power on/off indicator Power requirements factory-programmed for 115 V, 230 V or 100 V -50/60 Hz Cabinet High accoustic efficiency MDF Dimension (in inches) 15? x 10? x 12? Weight 26.4 lbs / 12 Kg

The Production Master Audio MX8 is the result of years of engineering; a magnetically-shielded, nearfield, 2-way studio reference monitor with a super-wide sweet-spot. The MX8 is built for creating and mixing electronic music in professional and home studios, big or small. Designed for demanding music and music-producers who want a super-accurate monitor they can trust and rely on.

Thanks to its high-quality components, The Production Master Audio MX8 is a true testimony to accuracy and clarity, a celebration of precision. It is truly a one of a kind studio monitor that is built with the toughest music styles in mind: relentless Trap and Hiphop, pounding Raw- and Hardstyle, raging Drum & Bass, screeching Riddim & Dubstep, saw-driven EDM and more. Throw whatever style you want at the MX8, it will provide you the clarity you need to produce a jaw-dropping mix.

True frequency response from 38 Hz – 22 kHz with a killer sweet-spot The MX8 has a true frequency response of 38 Hz – 22 kHz and truly prides itself on its ultra-flat response rate. No matter if you create intricate electronic music with a lot of detailed sounds or if you create banging dancefloor EDM, the MX8 is there to give you the most accurate representation possible and showcases every detail of your mix with great precision. With its killer sweet-spot you can hear every detail, no matter where you are standing.

Extended range ribbon-tweeter With its one of a kind, innovatory 60 Watt extended range ribbon tweeter and hand programmed crossover (2.2 kHz), the Production Master Audio MX8 is engineered for accuracy the likes of which you’ve never heard! The 60 Watt extended range ribbon-tweeter dinstinctively shows your highs with razor-sharp accuracy. Expect a super-precise higher midrange for those difficult vocal frequencies and crisp, perfect highs for the bright tops that EDM producers crave.

Kevlar woofer and frontal bass port The MX8 is a monitor that goes so low that it does not need to be paired with a sub to show the full frequency-range. The bass and mids are provided by an 8-inch curved cone Kevlar woofer with high temperature voice-coil. The MX8 brings forth deep and tight bass and showcases roaring mid-range. It is made to expose the most difficult frequencies in high detail, ideal for bass-heavy music such as Dubstep, Hardstyle, D&B, House and more. The frontal bass port finishes the spectrum and blends phat sub seamlessly into the mix.

Specifications Type 2-way nearfield studio reference monitor LF Driver 8-inch (203 mm), 70 W Kevlar curved cone with high temperature voice-coil and damped rubber surround, magnetically shielded HF driver 60 W Extended frequency range ribbon tweeter Frequency response 38 Hz - 22 kHz Crossover frequency 2.2 kHz Signal-to-noise ratio > 100 dB typical A-weighted Input connectors 1 XLR balanced, 1 TRS balanced/unbalanced Polarity positive signal at + produce outward cone displacement Input Impedance 20 k? balanced, 10 k? unbalanced Input sensitivity 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum Protection RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse Indicator power on/off indicator Power requirements factory-programmed for 115 V, 230 V or 100 V -50/60 Hz Cabinet High accoustic efficiency MDF Dimension (in inches) 15? x 10? x 12? Weight 26.4 lbs / 12 Kg

Specifications Type 2-way nearfield studio reference monitor LF Driver 8-inch (203 mm), 70 W Kevlar curved cone with high temperature voice-coil and damped rubber surround, magnetically shielded HF driver 60 W Extended frequency range ribbon tweeter Frequency response 38 Hz - 22 kHz Crossover frequency 2.2 kHz Signal-to-noise ratio > 100 dB typical A-weighted Input connectors 1 XLR balanced, 1 TRS balanced/unbalanced Polarity positive signal at + produce outward cone displacement Input Impedance 20 kΩ balanced, 10 kΩ unbalanced Input sensitivity 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum Protection RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse Indicator power on/off indicator Power requirements factory-programmed for 115 V, 230 V or 100 V -50/60 Hz Cabinet High accoustic efficiency MDF Dimension (in inches) 15″ x 10″ x 12″ Weight 26.4 lbs / 12 Kg