sprucebringsteen's Activity

FEATURES:

• All new lightweight combos for pedal steel and other amplified instruments
• Like having a vintage Nashville™ 112/400 and a Session®/LTD 400 combined into one amp
• 200W(rms) into 4 Ohms with revamped DDT speaker protection
• Weighs ~27 pounds
• All new Celestion speakers, voiced for modern pedal steel and clean guitar applications
• 15mm Poplar cabinet construction for light weight with superior strength
• Extremely high impedance input buffer circuitry
• High quality film caps throughout the preamp
• Miniaturized circuitry for superior noise performance
• "Session®" setting has Gain with active Low/High EQ with passive Mid/Shift/Presence
• "Nashville™" setting has Gain with active 3-band EQ with active Mid Shift/Presence
• Front loaded footswitchable buffered Effects Loop
• All new footswitchable reverb section with Plate and Spring options
• Rear mounted 9VDC aux power supply
• Full range Headphones and XLR Direct Interface with Level control
• Preamp Out and Power Amp In jacks @ 1V sensitivity

Octaland – The Ultimate High-Octave Tone Monster

The Octaland isn’t just another octave fuzz—it’s a game-changer. Whether you’re exploring new creative textures or chasing legendary high-octave sustain, this pedal is built to inspire. Plug in and unleash the beast.

Super Smooth, Playable, No Compromise High Octave Tones.

The Octaland is the result of years of research, refinement, and a deep understanding of what makes a high-octave pedal truly exceptional. More than just a guitar effect, it is a precision instrument, designed to deliver the most responsive and dynamic octave-fuzz tones available.

At the core of the Octaland is a wide-ranging drive control, allowing for an unprecedented level of tonal flexibility—from articulate, near-clean octave tones to rich, sustaining leads. Whether used subtly to enhance an existing drive tone or as the centerpiece of a mix, the Octaland is built to adapt to the demands of serious musicians and tone designers alike.

Refined Control, Unparalleled Versatility

NEW: Synth Mode – Expanding the creative potential of octave effects, this mode introduces a unique voice ideal for melodic textures and lead work, providing a distinct, expressive sound that integrates seamlessly into modern playing styles. BLEND Control – The ability to precisely mix the pure octave signal with clean or fuzz tones opens up a broad range of sonic possibilities. This allows for subtle harmonic enhancement or full-bodied, aggressive octave textures. VOICE Control – A carefully tuned two-way tonal shaping tool. Roll it back to retain the classic Octaland character, or turn it forward to access a wider range of refined, modern voicings—all while maintaining the pedal’s unmistakable clarity and definition.

Designed for the Demands of Performance

Dedicated Octave/Fuzz Footswitch – Instant access to high-octave tones with a dedicated switch, giving performers the ability to engage the effect with absolute precision. Silent Switching – Engineered for the modern stage and studio, eliminating mechanical noise and ensuring seamless transitions. Enhanced Output – The refined circuit delivers more headroom and output, allowing players to drive amplifiers naturally while retaining the pedal’s full dynamic range.

The Octaland is built for those who demand uncompromising quality, intuitive control, and exceptional tone. Whether in the studio, on stage, or in the hands of a meticulous sound designer, this pedal is not just an effect—it is a dedicated tool for serious musicians.

Features:

• 100% Original Design
• Octave/Fuzz/Clean Foot-Switch
• Voice Control Changes the Character And Shape Of The Octave and Fuzz Tones
• Blend Control Mixes Between Clean/Fuzz and Octave Sounds
• Vintage / FullFat / Glass Switch
• Synth / Bright / Focus Switch
• Classic, No Compromise Octaland Tones
• Sag Control Gives Tube-Like Tones All The Way To Gated Foxx Tone Machine and Zonk Style Octave Fuzz Tones
• Beautiful Clear and Extremely Playable High Octave Tone
• Top Mounted Jacks
• Carefully Selected And Matched Components
• True Bypass
• High Output
• Small Size 4.7” x 2.8”
• Almost Clean Octave Tone At Low Gain Settings
• Retains The Octave Tone Even At High Gain settings
• Runs on Battery or Standard 9 Volt DC Jack
• Custom Designed CNC Machined 6061 Metal Casing
• Built To Last A Lifetime
• 30 Day Money Back Guarantee.

This pedal produces the classic ‘Octavia’ tones heard by Hendrix and Vaughan but this pedal is not a clone, it has been designed from the ground up to produce the most playable and fat/pure high octave tones. At low gain settings its comes as close as possible to a clean high octave tone and at high drive settings it will retain the octave, unlike most other models that loose the octave tone at high gain. The pedal has a super playable and addictive tone. It sounds great for subtle funky lead or massive deep and full on riffs. It you are looking for the “Band Of Gypsies Tone”, look no further! Check out the video demos.

If you want to buy a used NOTADUMBLE with the circuit separation and order switch modification in 2025, it’s going to cost you almost triple the price of an original unit. That might not be a problem to some, but for most guitar players that’s the kind of price that’ll make other options a necessity. If you know how to build and have a lot of free time, you could buy a PCB and make one for a good price but what if you can’t confidently surf the solder wave? Until recently, the second hand market would have been your only choice but now any pedal enthusiast with an internet connection and a few bones can be blessed with a TNYDUMBLE if they so desire.

As the name suggests, the TNYDUMBLE is the smaller pedal board friendly version of the super popular Dumble style DIY pedal kit that has now been discontinued, but it also includes the modifications that most buyers were originally expecting. We separated the JFET based clean boost from the overdrive circuit and included an order switch for more versatility and tonal possibilities. A high frequency tone control has been added to the boost circuit that sits flat at noon and subtly boosts the top-end when dialed clockwise or cuts slightly when turned to the left. This addition really opens up the clean side and works well with the input knob which cuts low-end and gain simultaneously. The overdrive half remains unchanged and true to the original including the internal presence control and asymmetrical mosfet clipping. We also modified the mechanical 3PDT foot switches to the no-click style setup in true bypass that uses an electronic relay based design.

Features:

• Top mounted jacks

• Relay based softswitching

• SMD / Through-hole hybrid construction

• Green LED = Clean Boost

• Red LED = Overdrive

• 125b enclosure (4.8 x 2.6 x 1.55”)

• Accepts the standard 2.1mm center negative DC jack (Boss style)

• Current Draw : one = 32mA ; both = 60mA

The PORTA424 is the sound of a classic 4 track cassette recorder in pedal form! More specifically, it is an almost exact recreation of a single channel from the MK1 version. There are a few great Porta-inspired pedals out there, but this is the first to include the entirety of the signal path* with meticulously reconstructed gain staging, so you can perfectly recreate an analog-home-studio sound on the road, without lugging around the attached cassette deck and another three channels. This pedal gives you an input trim, treble and bass shelving EQ, channel fader, and master volume so you can dial in your settings exactly the same way as on the original. It sounds great at the end of your chain for its familiar DI tones, or at the front as a thick, trashy distortion. Either way, this circuit has a special kind of grit that deserved to be taken to the next level of portable!

Specifications:

• 9V DC power input (standard negative center) - up to 18V capable
• True bypass switching, latching foot switch
• 125B size enclosure
• There have been issues stocking the correct A10k slide pot, so current production uses B10k. They are electrically the same, but the B taper will increase the volume faster, and actually allows finer control at the top. Otherwise, they are identical.

*It doesn't sound as good with a knob instead of a fader ;-)

The 424 Gain Stage gives all the elastic, lo-fi tone you get from plugging a guitar rig straight into a TASCAM® Portastudio® 424. Now in pedal form, you can easily integrate the rubbery clean tones, high head room, and smashed out fuzz that’s being repopularized by today’s emerging guitarists.

And yes, it does the Mk.Gee “thing!” It also ventures well beyond, covering all types of bedroom pop and direct-in tones from emerging artists like D4vd, Steve Lacey, Malcolm Todd, and Omar Apollo, as well as mainstays like Mac Demarco, Spoon, and Radiohead.

The original Portastudios® were made famous in the ‘80s and ‘90s, and gave us the ability to bring our songs to life from the comfort of our cluttered bedrooms. These multi-track recorders meant for home studios found their way onto hit records like Springsteen’s Nebraska, the Wu-Tang Clan’s Enter the Wu-Tang, and Spoon’s Gimme Fiction. Many of the vocal parts and fuzzy guitar tracks on Gimme Fiction – a huge inspiration for the creation of the Colour Box – were actually recorded on a Portastudio®. Since hearing those recordings, the 424 Gain Stage has been brewing in the background, and now we’re proud to bring it to you.

In this historically accurate recreation, we perfectly replicated the original 424 MKI® circuit using the original UPC4570 and NJM4565 op-amps and all the original controls, which is crucial for recreating the unique character that makes the old units sound so good. The Portastudio’s® gain controls–trim, channel volume, & master volume–all work in tandem for dialing up your desired tone and can be further refined with the Low and High EQ settings. In addition, our unit offers a ¼” output alongside a balanced XLR output (DI out) for ultimate flexibility in any situation, live or studio.

The 424 Gain Stage as a DI

Going DI will give you the exact same unparalleled gooey texture and lo-fi fuzz you get when plugging directly into a 424® without the hassle of dragging around your beloved Portastudio®. Leave it on your recording desk for easy access. If you want to get fancy, you can toss an Active A/B/Y switcher at the end of your rig and send the A output to your amp and the B output to the JHS 424 Gain Stage input, then XLR output of the pedal directly into your mixer or interface. This way, you can flip between your amp and the 424 Gain Stage easily or play through both at the same time. Give it a try!

The 424 Gain Stage with an Amp

Plugging a Portastudio® into your amp is quite a feat. In this pedal format, you can easily integrate the tone of the 424 with the saturation of your favorite amp. This adds a whole new quality to the tone and gives the ability to stack it with your other pedals. Use it as a gain stage to boost your signal, a unique and colorful new overdrive sound, or push the gain knobs into full-on overloaded and broken fuzz.

CONTROLS:

• VOLUME (Corresponds to Portastudio® Master) - Controls the output volume. Left is less, right is more. On the Portastudio 424, this is the MASTER fader.

• GAIN 1 (TRIM) - Sets how much preamplification will be added to the input signal. On the Portastudio 424, this is the TRIM control.

• GAIN 2 (CHANNEL) - Sets the volume level of the second gain stage. On the Portastudio 424, this is the CHANNEL fader.

• BASS - Cuts or boosts bass frequencies. Left is less, right is more.

• TREBLE - Cuts or boosts the treble frequencies. Left is less, right is more.

INPUT - Top ¼” right jack.

OUTPUT - Top ¼” left jack.

XLR OUTPUT - XLR jack on the left side of the pedal. This is a balanced output which can be used as a direct-out straight into a mixer or interface. The 1/4” output and XLR output can be used simultaneously.

GROUND LIFT - Dip switch on the left side of the pedal. If you experience a hum/buzz while using the XLR output, use this switch to lift the ground.

POWER - Requires 9VDC center negative power and consumes 50mA.

The 424 Gain Stage is silent, soft touch switching with a buffered bypass.

THIS PEDAL MEASURES 2.6” X 4.8” X 1.6” AND CONSUMES 50MA. DO NOT USE MORE THAN 9VDC. DAMAGE MAY OCCUR AND YOUR WARRANTY WILL BE VOIDED.

THE JHS PEDALS 424 GAIN STAGE IS IN NO WAY AFFILIATED WITH OR ENDORSED BY TASCAM®

TASCAM AND PORTASTUDIO ARE REGISTERED TRADEMARKS.

This pedal is based on our now famous amp-in-a-box Preamp pedal with one important tweak: the replacement of the first FET transistor with a germanium gain stage - stolen from our servo-biased Germanium Boost pedal which is ideal as a versatile gain stage since it reliably imparts a germanium tonality, mostly doesn’t care about temperature, and doesn’t affect frequency response. The result is an alternate universe take on our flagship pedal that marries the incomparable feel of the germanium with the careful equalization and tone controls of the preamp pedal.

The result is a slightly lower gain, but richer sounding and feeling overdrive/boost/fuzz/whatever we really, really dig. We hope you like it!

Beware: Germanium stops passing music at 120 Degrees Farenheit (like a very hot stage)

Power Requirements: 9VDC Boss style adapter or battery 50ma

Controls:

• Gain (distortion)
• Treble (low pass filter)
• Bass (high pass filter)
• Volume

The secret weapon of a blues god The EC Expander is a powerful mid-boost that will instantly supercharge the tone of your pickups, pedals, and more. Now you can finally get this tone in a pedal.

This pedal kit is our take on the famous Strat MDX control Eric Clapton installed on all of his guitars. With just the turn of a knob this powerful mid-boost changed his bright and sparkly single coils into creamy vintage PAF-style humbuckers.

Don't buy your next pedal—build it! We loved this unique circuit so much we made it into a pedal kit. Now you don't have to modify your guitar—you can instantly add this tone to any instrument. Step on the pedal and your single coils sound fuller, and humbuckers sound richer and more dynamic.

But the pedal you build is not just a one-trick-pony! With just two knobs you've got endless ways to shape your tone. Add just a touch of mids to fill out your sound, or crank it to totally change the tone of your amp. And it stacks well with your favorite overdrive or distortion pedal for added flexibility. If you've got some drive or fuzz pedals that just turn to mush in the mix, adding some mids from the EC Expander will make these pedals come alive.

It's more than just a schematic We include everything you need to build your new pedal:

• Top quality components from resistors to switch
• Road-worthy rugged metal enclosure with all holes pre-drilled
• Bare or powder coated white finish
• 3PDT breakout board for low noise
• Input, output, and power jacks rear mounted for easy cable routing
• True bypass switch
• Custom printed labels

Easy! Download your instructions We've made these instructions ready to download now. You can zoom in on every solder joint and resistor value to make sure your build is perfect from start to finish. With these step-by-step instructions, full color illustrations, and complete wiring guide you'll build a pedal you'll enjoy for a lifetime. Be proud every time you step on the custom pedal that you built.

Make your pedal your way It's never been easier to have an inspiring sounding and looking pedal. We include labels for all of the knobs for a professional look. Paint your own raw metal enclosure or choose a powder coated enclosure that is ready to put on your board now. Take the first step to customize your sound.

Powered by a 9 volt power supply with a 2.1mm negative-center barrel, available separately.

One tremolo to rule them all! Build the world's most versatile tremolo pedal kit. From vintage to modern to crazy space sounds, there's nothing this trem pedal can't do.

We love all kinds of tremolo! Considered the first electric guitar effect, players for generations have enjoyed adding the subtle undulations and helicopter chop-like sounds to their tone. The problem is that most trem pedals just can't keep up with our creativity. Some only have a vintage vibe, while others are too modern. We needed something that had it all!

It's like getting three pedals in one! When we discovered this unique tremolo circuit, we knew any player would want to build this all-in-one trem. The pedal has three trem styles: vintage 60s, heavier 70s, and modern digital. Each is infinitely tweakable with a rate (speed) and depth knob. One cool feature is a level knob, allowing you to use it as a boost.

Don't buy your next pedal—build it! If you think building such a unique and versatile pedal sounds hard, don't worry. Our pedal kits don't just sound amazing, they're a blast to build too!

It's more than just a schematic We include everything you need to build your new pedal:

• Top quality components from resistors to switch
• Road-worthy rugged metal enclosure with all holes pre-drilled
• Bare or powder coated white finish
• 3PDT breakout board for low noise
• Input, output, and power jacks rear mounted for easy cable routing
• True bypass switch
• Custom printed labels

Easy! Download your instructions We've made these instructions ready to download now. You can zoom in on every solder joint and resistor value to make sure your build is perfect from start to finish. With these step-by-step instructions, full color illustrations, and complete wiring guide you'll build a pedal you'll enjoy for a lifetime. Be proud every time you step on the custom pedal that you built.

Start making and modding pedals It's never been easier to have a fantastic sounding and looking pedal. We include labels for all of the knobs for a professional look. Paint your own raw metal enclosure or choose a powder coated enclosure that is ready to put on your board now. Take the first step to customize your sound.

Powered by a 9 volt power supply with a 2.1mm negative-center barrel, available separately.

More than a "klone"—it's the closest we've ever seen to the real thing! Few pedals reach mythical status like the Klon Centaur Professional Overdrive. We scoured the world for the EXACT right components to recreate this "holy grail" circuit.

Considered the finest transparent overdrive ever, the original Klon is shrouded in mystery, epoxy, and hype—but amazingly, it delivers. It's a guitar player's dream come true: saturated tube tone from your amp at a reasonable volume. It doesn't change the character of your amp, you get just the right amount of overdrive without losing your unique tone. It's relied on by countless players like Joe Perry, Mike McCready, Joe Bonamassa, John Mayer, Nels Cline and more.

Don't buy your next pedal—build it! Original Klon's are selling for up to $10,000 (and they're still going up)! Many big pedal makers make their own "klones", but they never quite get it right. With this kit you'll be hand-wiring every component to the board, just like the originals. Many believe the hand-wired circuit has a huge impact on the tone of this pedal. And…the black epoxy is optional.

All the right components We dug deep to find the identical pair of 1N34A germanium diodes just like the original. Many claim these diodes were the heart of the original Klon and why so many of the imitators fall short.

This pedal is extremely easy to use: just gain, treble, and output. The gain is where the magic is by adding sweet saturation and harmonics while retaining the character of your amp. The treble acts as a boost or cut, allowing you to dial in the perfect mid-range for your tone.

Designed with the beginning pedal builder in mind We include everything you need to build your new pedal:

• 40 page step-by-step instructions written for the first time builder
• Top quality, high tolerance components from resistors to switch
• Road-worthy rugged metal enclosure with all holes pre-drilled
• Bare or powder coated white finish
• 3PDT breakout board for low noise
• Input, output, and power jacks rear mounted for easy cable routing
• Buffered bypass just like the original
• Custom printed labels

Nobody does instructions like StewMac This is a fun weekend project where you'll learn a lot and get a legendary pedal. We left no stone unturned, you'll see every solder joint and resistor value to make sure your build is perfect from start to finish. And if you get stuck, our team is here to help! Be proud every time you step on the custom pedal that you built.

Make your pedal your way It's never been easier to have an inspiring sounding and looking pedal. We include labels for all of the knobs for a professional look. Paint your own raw metal enclosure or choose a powder coated enclosure that is ready to put on your board now. Gold, silver, horsie or no? It's all up to you. Take the first step to customize your sound.

Powered by a 9 volt battery or 9 volt power supply with a 2.1mm negative-center barrel, available separately.

Battery saver! The included stereo input jack acts as a switch for the battery so that you do not drain power unless a cable is plugged in.

Build the pedal that redefined overdrive From SRV to Trey Anastasio to John Petrucci, this game-changing Tube Screamer-style overdrive will turn your timid tube amp into the tone monster you know it can be.

What else can be said about the TS-808 Ibanez Tube Screamer? With simple controls and the mythical JRC-4558D chip, this pedal pushes your amp into great sounding overdrive, WITHOUT completely changing your tone. It's like the amp you love, but better, and at a volume that won't get you evicted.

Don't buy your next pedal—build it! We love the original TS-808 circuit, so why mess with perfection? We include the same JRC-4558D chip that gives this pedal the perfect mix of grit and transparency. We improved the little things to make this pedal even better: we added true bypass, reduced the noise, and made sure all of the components were top quality from switch to jack.

With controls for volume, drive, and tone we've kept the simplicity that's made this pedal a classic. Just twist the knobs and this pedal will bring out the raunchy tones hidden in your amp. Because the circuit is so transparent, it will sound different depending on which amp you plug it into.

It's more than just a schematic We include everything you need to build your new pedal:

-Top quality components from resistors to switch - Road-worthy rugged metal enclosure with all holes pre-drilled - Bare or powder coated white finish - 3PDT breakout board for low noise - Input, output, and power jacks rear mounted for easy cable routing - True bypass switch - Custom printed labels

Easy! Download your instructions We've made these instructions ready to download now. You can zoom in on every solder joint and resistor value to make sure your build is perfect from start to finish. With these step-by-step instructions, full color illustrations, and complete wiring guide you'll build a pedal you'll enjoy for a lifetime. Be proud every time you step on the custom pedal that you built.

Make your pedal your way It's never been easier to have an inspiring sounding and looking pedal. We include labels for all of the knobs for a professional look. Paint your own raw metal enclosure or choose a powder coated enclosure that is ready to put on your board now. Take the first step to customize your sound.

Powered by a 9 volt power supply with a 2.1mm negative-center barrel, available separately.

An octave fuzz you can actually use! Build your own version of this unique classic.

The octave fuzz is one of the most fun pedals in a player's arsenal. Plug in and you get both fuzz and a tone one octave up. While these pedals are undeniably fun, some are too hard to control and others simply don't sound that great.

We were blown away by this circuit and think you will be too! Not too fuzzy and not too harsh, the Interval Fuzz simply sounds awesome. If you like the revered Dan Armstrong Green Ringer, this is the kit for you—with clean and overdriven amps, it never gets out of control.

Don't buy your next pedal—build it! Not only does this pedal sound great, it is super easy to build! With no knobs to get in the way, this is a great first project. Even if you've never soldered before you can wire up this surprisingly simple pedal kit in just a few hours.

It's more than just a schematic We include everything you need to build your new pedal:

• Top quality components from resistors to switch
• Road-worthy rugged metal enclosure with all holes pre-drilled
• Bare or powder coated white finish
• 3PDT breakout board for low noise
• Input, output, and power jacks rear mounted for easy cable routing
• True bypass switch
• Custom printed labels

Easy! Download your instructions We've made these instructions ready to download now. You can zoom in on every solder joint and resistor value to make sure your build is perfect from start to finish. With these step-by-step instructions, full color illustrations, and complete wiring guide you'll build a pedal you'll enjoy for a lifetime. Be proud every time you step on the custom pedal that you built.

Start making and modding pedals It's never been easier to have an inspiring sounding and looking pedal. We include labels for all of the controls for a professional look. Paint your own raw metal enclosure or choose a powder coated enclosure that is ready to put on your board now. Take the first step to customize your sound.

Powered by a 9 volt power supply with a 2.1mm negative-center barrel, available separately.

Get your hands on this ultra-rare pedal We found a small stash of the out-of-production chips to resurrect the coveted BOSS Slow Gear. Now you can build your own version of this unique pedal.

Only available from 1979-1982, the Slow Gear is an awesome and quirky effect. The variable auto swell sounds like a violin bow or even reverse delay. The components for this pedal were always in short supply, and it disappeared from stores nearly as quickly as it arrived.

Don't buy your next pedal—build it! The Slow Gear is considered to be one of the rarest BOSS pedals—clean examples sell for 3-4 times the original price! We love this fun circuit so much we tracked down the scarce chips to make this limited pedal kit. Now for less than the original price, you can build it!

Get them before they're gone! These chips are still very hard to find, so when our stock is gone, this pedal will disappear again.

It's more than just a schematic We include everything you need to build your new pedal:

• Top quality components from resistors to switch
• Road-worthy rugged metal enclosure with all holes pre-drilled
• Bare or powder coated white finish
• 3PDT breakout board for low noise
• Input, output, and power jacks rear mounted for easy cable routing
• True bypass switch
• Custom printed labels

Easy! Download your instructions We've made these instructions ready to download now. You can zoom in on every solder joint and resistor value to make sure your build is perfect from start to finish. With these step-by-step instructions, full color illustrations, and complete wiring guide you'll build a pedal you'll enjoy for a lifetime. Be proud every time you step on the custom pedal that you built.

Make your pedal your way It's never been easier to have an inspiring sounding and looking pedal. We include labels for all of the knobs for a professional look. Paint your own raw metal enclosure or choose a powder coated enclosure that is ready to put on your board now. Take the first step to customize your sound.

Powered by a 9 volt power supply with a 2.1mm negative-center barrel, available separately.

The warm sound of tape delay in a pedal Now you can get the unmistakable sound of an analog tape delay with the reliability and flexibility of a digital circuit.

We love analog tape delays! The raw, warm, and unique sound compliments the tone of electric guitars so well. The only problem is that tapes wear out, and analog delays can be inconsistent and difficult to dial in to the perfect sound for you. We set out to take the things we loved about classic delays and create a circuit that would be easy to use and sound killer too.

Don't buy your next pedal—build it! We worked hard and finally developed a delay that rivaled our favorite tape machines and priceless analog pedals. No cold, sterile repeats here—the dry signal path is all analog! With 30ms to 625ms of delay you can cover everything from rockabilly slapback to deep experimental soundscapes all in one great sounding package.

With knobs for time, repeats, mix, and tone it's easy to dial in subtle or more extreme delays. The tone knob gives you complete control over the sound—you'll never have to deal with the dark and muddy sounds that ruin other delay pedals.

It's more than just a schematic We include everything you need to build your new pedal:

• Top quality components from resistors to switch
• Road-worthy rugged metal enclosure with all holes pre-drilled
• Bare or powder coated white finish
• 3PDT breakout board for low noise
• Input, output, and power jacks rear mounted for easy cable routing
• True bypass switch
• Custom printed labels

Easy! Download your instructions We've made these instructions ready to download now. You can zoom in on every solder joint and resistor value to make sure your build is perfect from start to finish. With these step-by-step instructions, full color illustrations, and complete wiring guide you'll build a pedal you'll enjoy for a lifetime. Be proud every time you step on the custom pedal that you built.

Make your pedal your way It's never been easier to have an inspiring sounding and looking pedal. We include labels for all of the knobs for a professional look. Paint your own raw metal enclosure or choose a powder coated enclosure that is ready to put on your board now. Take the first step to customize your sound.

Powered by a 9 volt power supply with a 2.1mm negative-center barrel, available separately.