troyrk's activity

edited Fredric Effects ICBM 78

Improved item image. Added item description.

Set Bypass to true bypass
Set Analog/Digital to analog
Set Power to 9V

Aug 14, 2021

edited Fredric Effects Zombie Klone

Improved item name. Improved item image.

Revised item name. Show revisions
Before:
Fredric Effects Zombie Klon
After:
Fredric Effects Zombie Klone
Set Bypass to buffered bypass
Set Analog/Digital to analog
Set Power to 9V

Aug 14, 2021

edited Fredric Effects Classic Super Unpleasant Companion

Added item description. Improved item image.

Revised item description. Show revisions
Before:
After:
The Fredric Effects Super Unpleasant Companion is a combined Shin-Ei FY-2 Companion Fuzz and FY-6 Superfuzz clone in a single enclosure that's exactly the same dimensions as the original Companion Fuzz.

We've been planning this one for a while, and are very proud of the result. We measured the last Shin-Ei (actually Kimbara branded) FY-2 to pass through our doors and got these new enclosures professionally fabricated to the same dimensions. They've improved upon the vintage boxes by using 1.2mm steel (still not heavy, but no longer bendy!) welding the joins, and using threaded inserts for the side screws. The enclosures are powder coated for a hard-wearing finish, and the classy 'Super Unpleasant Companion' name plates have also been professionally manufactured.

The circuit is a faithful reproduction of both the FY-2 companion fuzz and FY-6 Superfuzz. Choose either with the big toggle switch and the controls are: FY-2: Fuzztone, Volume (little switch does nothing) FY-6: Gain/Sustain, Volume, tone switch
Set Bypass to true bypass
Set Analog/Digital to analog
Set Power to 9V

Aug 14, 2021

edited Fredric Effects BugCrusher

Improved item image.

Set Bypass to true bypass

Aug 14, 2021

edited Fredric Effects BugCrusher

Improved item image. Added item description.

Revised item description. Show revisions
Before:
After:
The BugCrusher is an Analogue Sample Rate Reducer - a Sample & Hold circuit run at audio rates - which produces aliasing effects on your signal.

With the Rate set high this imparts a clear fizzle & crunch, while at low rates any high frequencies will seem to wrap-around in an effect somewhat akin to a clean ring-mod.

Despite the name, the BugCrusher is not an actual BitCrusher - most BitCrusher effects will have Sample Rate (x-axis quantization) and Bit Depth (y-axis quantization) and are typically digital in nature.

Tom Bugs, the creator, says "Back when I was making BugCrushers, they were well liked for processing synths & drum machines, but the effect also has found favour with bassists as the low frequencies can pass through cleanly while the highs are crunched".
Revised item category. Show revisions
Before:
Bass Effects Pedals
After:
Filter Effects Pedals
Set Analog/Digital to analog
Set Power to 9V

Aug 14, 2021

edited Fredric Effects Accomplished Badger

Improved item image.

Set Bypass to true bypass
Set Analog/Digital to analog
Set Power to 9V

Aug 14, 2021

edited Fredric Effects Harmonic Percolator

Added item description. Improved item image.

Revised item description. Show revisions
Before:
After:
This is an improved clone of the Interfax Harmonic Percolator, an oddball overdrive/distortion pedal from the 1970s popularised by Steve Albini of Shellac. These pedals are built to the verified correct schematic and are a 100% accurate clone of the sought-after original, only with the addition of a switch to offer three different clipping options which greatly adds to the versatility of the effect.

The Fredric Effects Harmonic Percolator uses the correct vintage transitors (NOS 2N404 Germanium and 2N3565 Silicon) and 1N695 diodes - all the hard-to-find parts of the originals, but in a modern pedal-board friendly package, with DC power, LED indicator and normal rotary pots instead of sliders. So you can have the most accurate Harmonic Percolator clone possible without sacrificing usability.

Aug 14, 2021

edited Roland JC-60 Jazz Chorus

Improved item name. Improved item image.

Revised item name. Show revisions
Before:
Roland Jazz Chorus-60
After:
Roland JC-60 Jazz Chorus
Revised item category. Show revisions
Before:
Amplifiers
After:
Combo Guitar Amplifiers

Aug 13, 2021

edited Roland JC-80 Jazz Chorus

Improved item name.

Revised item name. Show revisions
Before:
Roland JC-80 Jazz Chorus 80
After:
Roland JC-80 Jazz Chorus

Aug 13, 2021

edited Roland JC-20 Jazz Chorus

Improved item name.

Revised item name. Show revisions
Before:
Roland JC-20 Jazz Chorus-20
After:
Roland JC-20 Jazz Chorus

Aug 13, 2021

edited Roland JC-85 Jazz Chorus

Improved item name.

Revised item name. Show revisions
Before:
Roland JC-85 Jazz Chorus-85
After:
Roland JC-85 Jazz Chorus

Aug 13, 2021

edited Roland JC-160 Jazz Chorus

Improved item name.

Revised item name. Show revisions
Before:
roland jazz chorus 160
After:
Roland JC-160 Jazz Chorus
Marked item as Vintage or Discontinued

Aug 13, 2021

edited Roland JC-50 Jazz Chorus

Improved item name.

Revised item name. Show revisions
Before:
Roland JC-50 50w Jazz Chorus
After:
Roland JC-50 Jazz Chorus

Aug 13, 2021

edited Roland JC-90 Jazz Chorus

Improved item name.

Revised item name. Show revisions
Before:
Roland JC-90 Jazz Chorus-90
After:
Roland JC-90 Jazz Chorus

Aug 13, 2021

edited Roland JC-55 Jazz Chorus

Improved item name.

Revised item name. Show revisions
Before:
Roland JC-55 Jazz Chorus-55
After:
Roland JC-55 Jazz Chorus

Aug 13, 2021

edited Roland JC-77 Jazz Chorus

Improved item name.

Revised item name. Show revisions
Before:
Roland Jazz Chorus-77
After:
Roland JC-77 Jazz Chorus

Aug 13, 2021

edited Roland JC-22 Jazz Chorus

Improved item name.

Revised item name. Show revisions
Before:
Roland JC-22 Jazz Chorus-22
After:
Roland JC-22 Jazz Chorus

Aug 13, 2021

edited Roland JC-40 Jazz Chorus

Improved item name.

Revised item name. Show revisions
Before:
Roland Jazz Chorus JC-40
After:
Roland JC-40 Jazz Chorus

Aug 13, 2021

edited Roland JC-120S Cabinet

Improved item name. Improved item image.

Revised item name. Show revisions
Before:
Jazz Chorus Cabinet
After:
Roland JC-120S Cabinet
Revised item Brand. Show revisions
Before:
After:
Roland

Aug 13, 2021

edited Roland JC-120H Jazz Chorus

Improved item name.

Revised item name. Show revisions
Before:
Roland JC-120H
After:
Roland JC-120H Jazz Chorus

Aug 13, 2021

edited Roland RE-301 Chorus Echo

Improved item name.

Revised item name. Show revisions
Before:
Roland RE-301 Chorus Echo Analog Tape Delay Effect
After:
Roland RE-301 Chorus Echo

Aug 10, 2021

edited Kent Armstrong Custom Series Stealth 90 Noiseless P-90 Pickups

Improved item name.

Revised item name. Show revisions
Before:
Kent Armstrong Kent Armstrong Custom Series Stealth 90 Noiseless P-90 Pickups
After:
Kent Armstrong Custom Series Stealth 90 Noiseless P-90 Pickups

Aug 8, 2021

edited Empress Buffer+ Stereo

Added item description.

Revised item description. Show revisions
Before:
After:
The Empress Buffer+ Stereo was designed to be the complete I/O interface for your pedalboard, all while maintaining the highest fidelity of your guitars' signal.

Signal loss due to long. un-buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the Buffer+ Stereo is to eliminate this signal loss, ensuring that your tone is unchanged by your cables.

We've incorporated all the features of our Buffer+ such as the foot-switchable boost, input padding, noise filters, and variable input loading, as well as a ton of additional features such as input metering and clip level indicators, AB/AY switching, external switch control, and of course full stereo in/out connectivity.

On top of all that, we've added 12 different operating modes, each with its own unique signal routing to provide maximum versatility and adaptability to just about any rig you can throw at it. Whether you're connecting stereo effects out to stereo amps, parallel mono effects chains, dual instruments to switch between, or effects in front of your amp as well as the fx loop, the Buffer+ Stereo has got you covered.

FEATURES

All Analog Signal Path - No digitals in here! Switchable Boost - Dial in up to 30dB of clean boost and switch on and off with the soft touch foot switch, or optional external footswitch. AB/ABY Switching - Use the onboard footswitch to AB or AY the outputs, AB the inputs for instrument switching, or even bypass your amp's effects loop. 12 Different Operating Modes - Want to sum stereo effects to dual mono? Maybe sum mono effects to run in parallel? How about buffer effects in front, and also your amp's fx loop? User configurable internal signal routing lets you do all of this and more. Input Metering - LED meters on all inputs to show the incoming signal and to alert you of clipping. Also great for troubleshooting! Tuner Mute - Hold the footswitch for a second to mute the amp output for tuning, or use an external footswitch to mute the output instantly. Noise Filters - Similar to Dolby's noise filter technology, choose between two different noise filters to remove any unwanted noise from your effects chain. Input Pad - Pad the input by either 6dB or 12dB. Great for matching output levels of different instruments, or avoiding clipping from a hot amp fx loop. Input Loading - Load down your pickups a little, a lot, or not at all. It's up to you. Transformer Isolated Output - Avoid ground loops when connecting to multiple amps or sources. Polarity can also be inverted to maintain phase between stereo amps. External Footswitch Control - Connect an external footswitch to activate the boost or instantly mute the ouput for tuning, to allow the onboard switch to be used for AB/AY switching.
Revised item category. Show revisions
Before:
Multi Effects Pedals
After:
Switch Effects Pedals
Set Bypass to buffered bypass
Set Analog/Digital to analog
Set Power to 9V

Aug 6, 2021

edited Loopi Pedals Single Momentary Soft Footswitch – Normally Open

Added item description.

Revised item description. Show revisions
Before:
After:
The Single Momentary Soft Footswitch is the ultra compact pedal that gives you the ability to control multiple delay and/or tremelo pedals.

This works with pedals that accept an external tempo and/or expression pedal such as the Eventide RC series, JHS, Electro-Harmonix, Cusack, Chase etc.

The single momentary footswitch is a “Normally Open” soft touch footswitch pedal.
Set Analog/Digital to analog

Aug 5, 2021

edited Loopi Pedals Single Momentary Soft Footswitch – Normally Closed

Added item description.

Revised item description. Show revisions
Before:
After:
The Single Momentary Soft Footswitch is the ultra compact pedal that gives you the ability to control multiple delay and/or tremelo pedals.

This works with pedals that accept an external tempo and/or expression pedal such as the Eventide RC series, JHS, Electro-Harmonix, Cusack, Chase etc.

The single momentary footswitch is a “Normally Closed” soft touch, no click, footswitch pedal.
Set Analog/Digital to analog

Aug 5, 2021

edited Loopi Pedals Single Momentary Footswitch – Normally Open

Added item description.

Revised item description. Show revisions
Before:
After:
The single momentary footswitch is a normally open and works with pedals that accept an external tempo and/or expression pedals.

This pedal can also be used with a number of the new floorboards in switching banks and patches.
Set Analog/Digital to analog

Aug 5, 2021

edited Loopi Pedals Single Momentary Footswitch – Normally Closed

Added item description.

Revised item description. Show revisions
Before:
After:
The single momentary footswitch is a normally closed switch and works with pedals that accept an external tempo and/or expression pedals.

This pedal can also be used with a number of the new floorboards in switching banks and patches.
Set Analog/Digital to analog

Aug 5, 2021

edited Loopi Pedals Mini Dual Momentary Soft Footswitch – Normally Open

Added item description.

Revised item description. Show revisions
Before:
After:
Twin soft touch clickless momentary switches that are normally open configuration. The jack is a Stereo/TRS connection.

Requires a stereo patch cable.
Set Analog/Digital to analog

Aug 5, 2021

edited Loopi Pedals Mini Dual Momentary Soft Footswitch – Normally Closed

Added item description.

Revised item description. Show revisions
Before:
After:
Twin soft touch clickless momentary switches that are normally closed configuration with a stereo jack.

Requires a stereo patch cable.
Set Analog/Digital to analog

Aug 5, 2021

edited Loopi Pedals Mini Dual Momentary Footswitch – Normally Open

Added item description.

Revised item description. Show revisions
Before:
After:
Dual momentary switches that are normally open footswitches in configuration with a stereo jack.

Requires a stereo patch cable.
Set Analog/Digital to analog

Aug 5, 2021