hashimoto's Activity

The Akai x-150D Tape Maschine The cross-field head created a sensation in the tape recorder market by making possible a wide range recording never before heard on any conventional tape recorder. Using this cross-field head, Akai model X-150D provides a surprising recording performance of 30-23,000 cps at a tape speed of 7-1/2 ips, 30-18,000 cps at 3-3/4 ips and 30 to 9,000 cps at 1-7/8 ips. What is superior about cross-field recording? How does it differ from typical recording methods as far as construction is concerned? In the typical recording system, the signal current and the bias current are combined together and applied to the recording head. It is well known that the purpose of bias current is to record, at high sensitivity, a signal applied on the tape, with little distortion and minimizing noise generation. However, the bias current providing such an advantage also has an undesirable character. That is, the wide magnetic field of the bias current affects the recorded signal, resulting in weakening or even erasing the signal. This phenomenon is particularly noticeable at high frequencies. In the cross-field system, the signal current is applied to the recording head while the bias current is applied to the bias head. These two heads are located in different positions, as determined inter-relatively, so that the magnetic field of the bias will not affect the signal recorded on the tape, even when sufficient bias is applied. This allows the recorded signal to remain on the tape with high fidelity. Specifications Track system: 4-track, 2-channel, stereo/monaural system Heads: 1 x record/playback, 1 x erase, 1 x bias Motor: 2 speed hysteresis synchronous Equalization: NAB Tape speeds: 1 7⁄8 3 3⁄4 7 1⁄2 ips Wow and flutter: 0.12% (7 1⁄2 ips) Frequency response: 30Hz to 23kHz (7 1⁄2 ips) Signal to Noise Ratio: 50dB Input: 60mV (line), 0.5mV (DIN) Output: 1.23V (line) Semiconductors: 11 x silicon transistors, 2 x diodes, 2 x rectifiers Dimensions: 340 x 340 x 230mm Weight: 14kg Note: optional 15ips

The Akai x-150D Soild State Custom Deck Tape Maschine The cross-field head created a sensation in the tape recorder market by making possible a wide range recording never before heard on any conventional tape recorder. Using this cross-field head, Akai model X-150D provides a surprising recording performance of 30-23,000 cps at a tape speed of 7-1/2 ips, 30-18,000 cps at 3-3/4 ips and 30 to 9,000 cps at 1-7/8 ips. What is superior about cross-field recording? How does it differ from typical recording methods as far as construction is concerned? In the typical recording system, the signal current and the bias current are combined together and applied to the recording head. It is well known that the purpose of bias current is to record, at high sensitivity, a signal applied on the tape, with little distortion and minimizing noise generation. However, the bias current providing such an advantage also has an undesirable character. That is, the wide magnetic field of the bias current affects the recorded signal, resulting in weakening or even erasing the signal. This phenomenon is particularly noticeable at high frequencies. In the cross-field system, the signal current is applied to the recording head while the bias current is applied to the bias head. These two heads are located in different positions, as determined inter-relatively, so that the magnetic field of the bias will not affect the signal recorded on the tape, even when sufficient bias is applied. This allows the recorded signal to remain on the tape with high fidelity. Specifications Track system: 4-track, 2-channel, stereo/monaural system Heads: 1 x record/playback, 1 x erase, 1 x bias Motor: 2 speed hysteresis synchronous Equalization: NAB Tape speeds: 1 7⁄8 3 3⁄4 7 1⁄2 ips Wow and flutter: 0.12% (7 1⁄2 ips) Frequency response: 30Hz to 23kHz (7 1⁄2 ips) Signal to Noise Ratio: 50dB Input: 60mV (line), 0.5mV (DIN) Output: 1.23V (line) Semiconductors: 11 x silicon transistors, 2 x diodes, 2 x rectifiers Dimensions: 340 x 340 x 230mm Weight: 14kg Note: optional 15ips

The Akai x-150D Tape Maschine The cross-field head created a sensation in the tape recorder market by making possible a wide range recording never before heard on any conventional tape recorder. Using this cross-field head, Akai model X-150D provides a surprising recording performance of 30-23,000 cps at a tape speed of 7-1/2 ips, 30-18,000 cps at 3-3/4 ips and 30 to 9,000 cps at 1-7/8 ips. What is superior about cross-field recording? How does it differ from typical recording methods as far as construction is concerned? In the typical recording system, the signal current and the bias current are combined together and applied to the recording head. It is well known that the purpose of bias current is to record, at high sensitivity, a signal applied on the tape, with little distortion and minimizing noise generation. However, the bias current providing such an advantage also has an undesirable character. That is, the wide magnetic field of the bias current affects the recorded signal, resulting in weakening or even erasing the signal. This phenomenon is particularly noticeable at high frequencies. In the cross-field system, the signal current is applied to the recording head while the bias current is applied to the bias head. These two heads are located in different positions, as determined inter-relatively, so that the magnetic field of the bias will not affect the signal recorded on the tape, even when sufficient bias is applied. This allows the recorded signal to remain on the tape with high fidelity. Specifications Track system: 4-track, 2-channel, stereo/monaural system Heads: 1 x record/playback, 1 x erase, 1 x bias Motor: 2 speed hysteresis synchronous Equalization: NAB Tape speeds: 1 7⁄8 3 3⁄4 7 1⁄2 ips Wow and flutter: 0.12% (7 1⁄2 ips) Frequency response: 30Hz to 23kHz (7 1⁄2 ips) Signal to Noise Ratio: 50dB Input: 60mV (line), 0.5mV (DIN) Output: 1.23V (line) Semiconductors: 11 x silicon transistors, 2 x diodes, 2 x rectifiers Dimensions: 340 x 340 x 230mm Weight: 14kg Note: optional 15ips

Dillion Model - DR 450 Semi-hollow body with flame maple top Features: Bound Mahogany semi hollow body Bound f-holes 2 Dillion custom alnico Humbuckers American Flame or Quilt maple top Bound set neck with rosewood fingerboard Bound headstock with pearl Isis inlay Grover USA gears with black knobs and 18 to 1 ratio 24 hand polished 2.7 mm med. jumbo frets Pearl Isis inlay on the12 th fret Graphite or bone nut + D'Addario strings ( 10-46 ) Wilkinson wrap around bridge with quick intonation One volume, one tone, plus 3 way switch 24 3/4 " scale - 12" Radius - 1 11/16 Nut width and 1 or 2 push / pull coil taps on some models

Super fun 80s era analog octave goodness. This tracks quickly, sounds natural and groovy and has -1 octave and -2 octaves on tap ready to go. Model: Aria AOC-1 Octave Made: Japan, 1982 approx Type: octave Power: standard 9v DC negative power supply or 9v battery (not included)

The Tagima TW Series TG-530 BODY MATERIAL: Basswood NECK MATERIAL: Maple FINGERBOARD: Maple with 22 frets and black dots NUT DIMENSION: 42 mm PICKUPS: 3 Single Coil Standard Ceramic CONTROLS: 5 Position Pickup Switch, 1 Volume, 2 Tone Controls BRIDGE: Tremolo Chrome MACHINE HEADS: Sealed Chrome COLORS: Black, Sunburst, Olympic White, Metallic Red, Lake Placid Blue, Surf Green PICKGUARD : Mint green, Tortoise Shell LEFT-HANDED? No

The ESP LTD TE-200DX PB LTD’s DX range allows for musicians to get access to a high-quality guitar at a price far less than its impressive features would imply. The TE-200DX is an excellent and very affordable option for getting the classic LTD TE shape with features for contemporary guitarists. These include a lightweight and comfortable poplar body with an elegant birdseye maple top, and a roasted maple neck with rosewood fingerboard, offset dot inlays, and 24 extra-jumbo frets. The TE-200DX also features a hardtail bridge, black chrome hardward, black body binding, and a tiltback headstock. The TE-200DX includes a set of our acclaimed ESP LH-150 humbucking pickups with matching black chrome covers in the bridge and neck positions, providing punchy, great tone for all genres of music. You also get the flexibility of single-coil tones controlled by a push-pull switch on the tone knob. Body: Poplar Top: Poplar burl Bolt-on neck: Roasted maple Fingerboard: Rosewood Fingerboard radius: 350 mm (13.78") Scale: 648 mm (25.5") Nut width: 42 mm (1.65") Neck profile: Thin U 24 XJ frets Pickups: LTD LH-150B (bridge) and LTD LH-150N (neck) humbucker 3-Way switch Volume and tone control with push/pull function for coil split Fixed bridge Black hardware LTD DieCast machine heads Strings: Daddario XL110 .010 - .046 Colour: Purple Burst

30 30-Day Money-Back Guarantee 3 3-Year Thomann Warranty Available since September 2024 Item number 593620 Sales Unit 1 piece(s) Colour Purple Body Poplar Top Poplar Neck Roasted Maple Fretboard Rosewood Frets 24 Scale 648 mm Pickups HH Tremolo None incl. Bag No incl. Case No