user635341's Activity

LYRA-8 is based on eight generators, which will be referred to as voices. Their design is not like a traditional subtractive synthesis VCO. Instead of having a linear or logarithmic dependency on control voltage, they resemble the tone generators in old electric organs. Hence the use of the term “voices” instead of “VCOs”. Lyra uses non-linearity a lot, and the voices are constructed in such a way that allows for non-linearity to express itself.

The voices are divided into four pairs (12, 34, 56, 78). All the pairs are divided in two groups, with two pairs in each (1234, 5678), creating tree-like structure.

The voices can function either in an electric organ mode or in an FM synthesis mode with each of the voices and its envelope acting as a separate FM operator. The voice’s impact on FM synthesis will decrease along with the decay of its envelope.

LYRA-8 also has the next blocks:

The HYPER LFO is a complex low-frequency generator, whose waveform is synthesized from two simple LFOs by summation or multiplication of their frequencies. It also has a sync mode. The LFO can modulate the selected pairs of voices and the MOD DELAY.

The MOD DELAY consists of two lines of delay with cross-feedback and a special architecture that enables resonance between the two lines. Each line’s delay time can be individually modulated from various sources, including external ones. The delay has a unique possibility of self-modulation where the output signal modulates the delay sample rate, creating cool effects.

The DISTORTION is last in the chain, after the delay. It enables the delay to also influence the distortion.

For all its experimental character, LYRA is a professional instrument. Its output dynamics and frequency response are balanced and ready for a live performance or studio recording without any additional processing.

Limited production of these unique handbuilt rack reverb/distortion units, based on the classic Grampian Type 636 circuit. Bespoke redesign; hand-built featuring vintage and original components to faithfully replicate the authentic sound of the original but with improved low end, lower noise and mic pre direct out.

DECKARD’S DREAM, or DDRM, features eight voices, each with two identical layered parts consisting of a 100% analog voltage controlled oscillator made with discrete waveshapers, analog lowpass and highpass filter (each with their own cutoff and resonance settings,) noise generator, unique multi-segment filter envelope, and VCA + ADSR envelope. Each layer also features its own independent programming section for MPE-based velocity and polyphonic aftertouch control of its filter cutoff and amplifier settings.

DDRM’s perfomance section features global pitch control with coarse & fine-tuning sliders, layer 2 detune slider, independent keyboard range control for each layer, mix balancing between layer 1 and layer 2, global filter cutoff and resonance offsets, and a global LFO to control both layers’ filter/pitch/amplifiers simultaneously.

DDRM was created with full expressive performance control in mind, and boasts programming sections for global MPE-based control over LFO parameters + pitchbend, as well as global key tracking control over the filter and amplifier settings of both layers. Finally, there is a global portamento/glissando slider affecting both layers simultaneously. The level of expressive control these parameters give over a performance is something found in very few synthesizers, and the result are stunning!

DDRM features full MIDI control and the ability to store 128 presets per bank across 3 banks, integrating this classic synth concept seamlessly into the future of your modern studio needs.

The unique architecture of KIJIMI features smoothly variable waveforms on each fully analog oscillator, a rich SSI2144 lowpass filter, and a wealth of deeply programmable modulators, making it one of the most powerful polyphonic analog synthesizers ever made.

KIJIMI features eight voices, each with two oscillators + one suboscillator, a lowpass filter, VCA, 6 envelopes, and 16 LFOs. A deeply programmable modulation matrix along with velocity and polyphonic aftertouch route these modulators into a variety of destinations to create anything from subtle movements in bass lines to complex, organically evolving soundscapes. Polyphonic aftertouch introduces another level of touch- controlled modulation independent to each voice, making KIJIMI a truly powerful performance tool.

Variable wave shaping of its analog oscillators is a feature unique to KIJIMI’s synthesizer design. Rather than selecting a single waveform KIJIMI offers a range of waveforms from Triangle through Saw to Pulse waves, passing smoothly through every shape in between. Using modulation sources to control the oscillator waveform brings a new dimension to the sound sculpting process. Each oscillator can be modulated independently, detuned in semitone intervals and synced to each other, VCO2 can even be used to FM VCO and filter, bringing rich harmonic content to the initial tone.

KIJIMI’s SSI2144-based lowpass filter is an updated version of a legendary design found in some of the most powerful analog synthesizers throughout history. Apart from being a gorgeous, rich lowpass filter for typical duties, a powerful feature found in the KIJIMI is the ability to FM the filter via VCO2, resulting in sounds ranging from atonal clangorous FX to aggressive vocal-sounding formants. The filter cutoff and resonance can be independently modulated, providing a filter section, which is far more complex than most analogue polyphonic synthesizers.

KIJIMI’s two envelopes are set up in typical ADSR mode by default, but a CYCLE button can be switched on to enter a cycling trapezoidal mode reminiscent of the function generator found in the EMS Synthi. In this mode, the 4 parameters are instead used to control Rise, Time On, Fall, and Time Off, resulting in a uniquely controllable cyclic function. Each envelope also features 3 switchable speed modes ranging from fast, medium, or slow.

By default, KIJIMI features two powerful LFOs – Each with many selectable waveforms, rate, and a dedicated A/D envelope for modulating its rate on each new trigger. This means that each LFO can have its speed modulated on each new note independently of any other modulators across the synthesizer.

The modulation matrix in KIJIMI is what makes this instrument truly special: 8 destinations for each LFO, and 4 destinations for ADSR2, each with its own button to switch between Unipolar (+/-) or Bipolar modulation. Furthermore, our newest firmware introduces the ability to assign different LFO settings (rate, waveform, EG and depth) to EACH individual destination. More information on this feature will be provided in detail in the upcoming firmware documentation. Below the Modulation Matrix are the performance modulators: Velocity and MPE- based polyphonic aftertouch which can be routed to 6 simultaneous destinations, each with its own bipolar level setting. With the ability to control filter, VCA, pitchbend, sub oscillator level, and 2 LFOs each modulating up to 8 destinations independently on each voice through your aftertouch performance, the expressive possibilities are truly limitless.

KIJIMI features full MIDI control and 10 preset banks with 128 slots including a Factory Bank and 9 user banks for storing and recalling settings.

XERXES delivers and unmatchable level of warmth through its two digitally controlled analog oscillators. A multimode analog filter, noise generator, 2 ADSR envelopes, 2 sync-able LFOs, unique analog BBD chorus with 3 modes, full MPE-based polyphonic aftertouch, and complete MIDI control work together to bring a classic analog sound ready to integrate into modern times.

Xerxes produces triangle, saw, square, and PWM waveforms with variable drift controls from each oscillator, sync with variable phase shifting, and ring modulation allowing for complex cross-modulation effects. Each oscillator features an octave switch, bipolar transpose potentiometer +/-7 semitones, a master tuning pot affecting both oscillators, and a detune knob for subtly detuning Oscillator 2 to Oscillator 1. Portamento/Glissando or Glide can be programmed to affect Oscillator 1, 2, or both.

The analog multimode filter on XERXES offers 24db/oct low pass and high pass modes and a band pass filter mode switchable from 12db/oct & 24db/oct for all kinds of filter characteristics. The filter can also be modulated by the dedicated ADSR envelope, LFO, velocity, and aftertouch (both MPE and Polyphonic Aftertouch supporting) allowing for incredibly expressive performance and programming.

XERXES features 6 LFO waveforms: Sine, triangle, saw, ramp, square, and random, plus a dedicated delay control to fade the LFO to the full amount set by the depth knob. Two LFOs are selectable with an A/B switch, each of which can be used to control multiple parameters set by the button switches to control oscillator tuning (A/B/Both) filter cutoff, and amplifier levels (VCF/VCA/Both.) Each of these LFOs also includes a Sync on/off switch.

XERXES features a beautiful, fully-analogue BBD-based chorus with 3 selectable modes, similar to the chorus effect found on the vintage Elka Synthex synthesizer. XERXES is equipped with stereo 1/4” outputs to take full advantage of the stereo chorusing effect.

Finally, XERXES features full MIDI control and ability to store 128 user presets per bank across 11 banks (Factory, Vintage and 9 user banks), integrating this classic synth concept seamlessly into any studio setup.

DECKARD’S DREAM, or DDRM, features eight voices, each with two identical layered parts consisting of a 100% analog voltage controlled oscillator made with discrete waveshapers, analog lowpass and highpass filter (each with their own cutoff and resonance settings,) noise generator, unique multi-segment filter envelope, and VCA + ADSR envelope. Each layer also features its own independent programming section for MPE-based velocity and polyphonic aftertouch control of its filter cutoff and amplifier settings.

DDRM’s perfomance section features global pitch control with coarse & fine-tuning sliders, layer 2 detune slider, independent keyboard range control for each layer, mix balancing between layer 1 and layer 2, global filter cutoff and resonance offsets, and a global LFO to control both layers’ filter/pitch/amplifiers simultaneously.

DDRM was created with full expressive performance control in mind, and boasts programming sections for global MPE-based control over LFO parameters + pitchbend, as well as global key tracking control over the filter and amplifier settings of both layers. Finally, there is a global portamento/glissando slider affecting both layers simultaneously. The level of expressive control these parameters give over a performance is something found in very few synthesizers, and the result are stunning!

DDRM features full MIDI control and the ability to store 128 presets per bank across 3 banks, integrating this classic synth concept seamlessly into the future of your modern studio needs.

DECKARD’S DREAM MK2 delivers everything the previous versions of DDRM in a new thin and light tabletop format with woodsides or rack-ears (both included). It also brings additional controls over Sustain modes and timing.

Tubes, tubes, and more tubes! The new Ampeg SVT-VR is a vintage reissue of an early 1970s “Blue-Line” SVT head. The preamp stage, power section, and even rocker switches emulate the exact signal path, tone, and vibe of the original rock ’n’ roll workhorse. Authentic from its input jack all the way to its six 6550 output tubes, the SVT-VR is a must-have for rockers seeking that in-your-face Ampeg bass tone.

The Transient Designer has created a new breed of dynamics processors that can shape the transient response of any audio signal.

PC12 as successor of the PC44 is a universal controller for all kinds of Midi controllable hard- and software.

You can combine two or more NEW MODULE devices to create a large system. The connections are on the right side to allow a back to back placing of two or more devices. Connect two NEW MODULES by a special extension port.

Furthermore there are 4 Midi-ports and one USB-port with various routing possibilities.

It is packed in a alu case with the same dimensions like the famous ELEKTRON devices so it’s a great extension for these devices. But you can use the pot controller also with your DAW like a classical 12-track-mixer.

The device has 72 standard pots and 12 buttons in a 12-track-layout, Various kinds of midi commands like control change, note on/off, pitchbend, aftertouch and program change are possible. You can program every Midi command for every separate control on the device very fast and easily.

Of course you can assign the pots and keys to any of these commands by learning incoming Midi commands, which is the same procedure you know from your software / DAW. The pots work with standard resolution of 7 bit to have full compatibility to any software and hardware instrument, effect and DAW. Use the internal 30 setups to save your individual settings. Backup and restore of all settings by sysex dumps is possible too.

The factory settings are perfect to control music and video software products out of the box if they are freely assignable. So any additional device programming isn’t necessary for many applications.

Some special setups are preconfigured for use with ELEKTRON RYTM and ABLETON LIVE.

MX12 as successor of the UC44 is a universal controller for all kinds of Midi controllable hard- and software.

You can combine NEW MODULE devices to a large system. The connections are on the right side to allow a back to back placing of two or more devices. Connect two NEW MODULES by a special extension port.

Furthermore there are 4 Midi-ports and one USB-port with various routing possibilities.

It is packed in a alu case with the same dimensions like the famous ELEKTRON devices so it’s a great extension for these devices. But you can use the mix controller also with your DAW like a classical 12-track-mixer.

The device has 24 standard pots, 12 Faders and 24 buttons in a 12-track-layout, Various kinds of midi commands like control change, note on/off, pitchbend, aftertouch and program change are possible. You can program every Midi command for every separate control on the device very fast and easily.

Of course you can assign the pots and keys to any of these commands by learning incoming Midi commands, which is the same procedure you know from your software / DAW. The pots work with standard resolution of 7 bit to have full compatibility to any software and hardware instrument, effect and DAW. Use the internal 30 setups to save your individual settings. Backup and restore of all settings by sysex dumps is possible too.

The factory settings are perfect to control music and video software products out of the box if they are freely assignable. So any additional device programming isn’t necessary for many applications.

Some special setups are preconfigured for use with ELEKTRON RYTM and ABLETON LIVE.

The harmonically rich sound and legendary performance of the Ampeg SVT are redefined in the SVT Classic. This dynamically powerful all-tube bass amp delivers a thunderous 300-Watts of unsurpassed quality, reliability and tonal flexibility. Although other companies have tried to capture the classic all-tube sound of ’60s and ’70s Ampeg bass heads, no one can touch the SVT.

Classic Series Heads are designed for players who are looking for the authentic, vintage Ampeg tube sound that has earned the respect of the industry. With a huge and diverse group of artists endorsements, including George Clinton (P-Funk), Gene Simmons (KISS), Dave "Phoenix" Farrell (Linkin Park), and far too many others to list here, the SVT-CL is a clear favorite. In the world of high performance bass amps it stands head and shoulders above the rest.

Designed and assembled in the U.S.A., the Ampeg Heritage SVT-CL is built with premium components and construction, delivering true Ampeg tone. Premium JJ tubes provide unmatched tone and classic Ampeg EQ offers flexibility and control. It's Ampeg's Heritage, but it's your gear... and has been for more than 60 years.