drake_foster's Activity

It is the Russian equivalent of a 6L6 tube and was designed for the use in military vehicles and aircrafts.. The 6P3S-E was developed as an improvement over the 6P3S. It could not only handle higher plate voltages than the 6P3S, but also had a higher plate dissipation.

The most sought after ones from 1960s made during the time of USSR's reign were manufactured in the Foton tube factory, now located at Tashkent, Kazakhstan. The ones made after the fall of USSR were manufactured in Reflector factory, at Saratov, Russia.

After New Sensor Corp. took the ownership of the Reflector factory these tubes were re-branded under the Sovtek brand name as 5881/6L6WGC. New Sensor Corp. also made them with 6L6GC style bases to fit amps that have bear-trap retainers, these new tubes with modified bases were named 5881WXT.

6N2P-EV is a miniature 9-pin dual triode vacuum tube manufactured in USSR, Russia and China with characteristics similar to the 12AX7. It's an improved and more rugged version of the 6N2' and was introduced in the 1970s.

The most significant difference between the two is that 6N2P, and 6N2P-EV have their two filament elements connected in parallel, unlike the series filament connection of the 12AX7, and it is thus only possible to operate them from a 6.3 volt, 340 mA filament supply (whereas a 12AX7 may be operated from either 6.3 or 12.6 volts, at 300 mA or 150 mA, respectively.)

Neither the 6N2P nor the 6N2P-EV is a pin-compatible replacement for the 12AX7 - an adapter (Or rewiring the valve socket) is required. The amplification factor of 6N2P is 98 which is marginally lesser than 12AX7, its higher heater current draw is similar to a 5751.

6N2P-EV is a miniature 9-pin dual triode vacuum tube manufactured in USSR, Russia and China with characteristics similar to the 12AX7. It's an improved and more rugged version of the 6N2 and was introduced in the 1970s.

The most significant difference between the two is that 6N2P, and 6N2P-EV have their two filament elements connected in parallel, unlike the series filament connection of the 12AX7, and it is thus only possible to operate them from a 6.3 volt, 340 mA filament supply (whereas a 12AX7 may be operated from either 6.3 or 12.6 volts, at 300 mA or 150 mA, respectively.)

Neither the 6N2P nor the 6N2P-EV is a pin-compatible replacement for the 12AX7 - an adapter (Or rewiring the valve socket) is required. The amplification factor of 6N2P is 98 which is marginally lesser than 12AX7, its higher heater current draw is similar to a 5751.

6N2P-EV is a miniature 9-pin dual triode vacuum tube manufactured in USSR with characteristics similar to the 12AX7. It was introduced in 1970s and was an improved, high gain, and more rugged version of the 6N2P (which was a 5751 equivalent).

The most significant difference between the 6N2P-EV, and 12AX7 is that it has its two filament elements connected in parallel, unlike the series filament connection of the 12AX7, and it is thus only possible to operate it from a 6.3 volt, 340 mA filament supply (whereas a 12AX7 may be operated from either 6.3 or 12.6 volts, at 300 mA or 150 mA, respectively)

Neither the 6N2P, nor the 6N2P-EV are a pin-compatible replacement for the 12AX7 - an adapter (Or rewiring the valve socket) is required.

6N2P-EV is a miniature 9-pin dual triode vacuum tube manufactured in USSR, Russia and China with characteristics similar to the 12AX7. It's an improved and more rugged version of the 6N2' and was introduced in the 1970s.

The most significant difference between the two is that 6N2P, and 6N2P-EV have their two filament elements connected in parallel, unlike the series filament connection of the 12AX7, and it is thus only possible to operate them from a 6.3 volt, 340 mA filament supply (whereas a 12AX7 may be operated from either 6.3 or 12.6 volts, at 300 mA or 150 mA, respectively.)

Neither the 6N2P nor the 6N2P-EV is a pin-compatible replacement for the 12AX7 - an adapter (Or rewiring the valve socket) is required. The amplification factor of 6N2P is 98 which is marginally lesser than 12AX7, its higher heater current draw is similar to a 5751.

6N2P-EV is a miniature 9-pin dual triode vacuum tube manufactured in USSR with characteristics similar to the 12AX7. It was introduced in 1970s and was an improved, high gain, and more rugged version of the 6N2P (which was a 5751 equivalent).

The most significant difference between the 6N2P-EV, and 12AX7 is that it has its two filament elements connected in parallel, unlike the series filament connection of the 12AX7, and it is thus only possible to operate it from a 6.3 volt, 340 mA filament supply (whereas a 12AX7 may be operated from either 6.3 or 12.6 volts, at 300 mA or 150 mA, respectively)

Neither the 6N2P, nor the 6N2P-EV are a pin-compatible replacement for the 12AX7 - an adapter (Or rewiring the valve socket) is required.

Specifications: Type: Ribbon Microphone; Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 60mm (L) X 5mm (W); Material of the fastening contacts is gold. Polar pattern: Figure 8 Symmetrical design; Sensitivity: 2 mV/Pa; Frequency response: 20 - 18,000 Hz; Output Impedance: 150 Ohms; Recommended load impedance: >1000 Ohms; Max.SPL (1% THD @1000 Hz): 135 dB; Transformer turn ratio 1:75 (original amorphous transformer by own design). In microphones the new transformer is used, developed on a magnetic conductor from an amorphous alloy, by analogy with the known Samar Audio and Lundahl brands.

Specifications:

• Type: Ribbon Microphone;
• Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 60mm (L) X 5mm (W);
• Material of the fastening contacts is gold.
• Polar pattern: Figure 8 Symmetrical design;
• Sensitivity: 2 mV/Pa;
• Frequency response: 20 - 18,000 Hz;
• Output Impedance: 150 Ohms;
• Recommended load impedance: >1000 Ohms;
• Max.SPL (1% THD @1000 Hz): 135 dB;
• Transformer turn ratio 1:75 (original amorphous transformer by own design).

In microphones the new transformer is used, developed on a magnetic conductor from an amorphous alloy, by analogy with the known Samar Audio and Lundahl brands.

Specifications: Type: Ribbon Microphone; Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 60mm (L) X 5mm (W); Material of the fastening contacts is gold. Polar pattern: Figure 8 Symmetrical design; Sensitivity: 2 mV/Pa; Frequency response: 20 - 18,000 Hz; Output Impedance: 150 Ohms; Recommended load impedance: >1000 Ohms; Max.SPL (1% THD @1000 Hz): 135 dB; Transformer turn ratio 1:75 (original amorphous transformer by own design). In microphones the new transformer is used, developed on a magnetic conductor from an amorphous alloy, by analogy with the known Samar Audio and Lundahl brands.

Samson’s CS Series (Capsule Select) Microphone offers the capabilities of two pro-level dynamic microphones in one versatile package. With easily interchangeable Vocal and Instrument mic capsules, the CS Series mic is perfect for capturing stunning vocal performances or miking your favorite instruments.

Samson’s CS Series (Capsule Select) Microphone offers the capabilities of two pro-level dynamic microphones in one versatile package. With easily interchangeable Vocal and Instrument mic capsules, the CS Series mic is perfect for capturing stunning vocal performances or miking your favorite instruments.

The CS Series mic features both the CS1 (vocal) and CS2 (instrument) selectable mic elements, as well as a handheld base. Both neodymium capsules offer a supercardiod pickup pattern, but are further designed to support completely different miking applications. The base’s threaded twist-off construction makes it both quick and easy to change capsules and miking techniques. The base also features a gold-plated XLR jack (mic cable not included) for strong connectivity.

Dynamic Microphone with Interchangeable Vocal and Instrument Capsules

Samson’s CS Series (Capsule Select) Microphone offers the capabilities of two pro-level dynamic microphones in one versatile package. With easily interchangeable Vocal and Instrument mic capsules, the CS Series mic is perfect for capturing stunning vocal performances or miking your favorite instruments.

The Octaver lets you add one and/or two octaves below an original tone. Just like the original Pearl OC-07 the Zeta Sound Pearl Octaver OC-7 has four controls that let you add a tone that is one octave below, two octaves below and also one octave above with the dry signal. These controls are fully independent, so you can create various octave sounds.

The Zeta Sound Pearl Octaver OC-7 lets you add one octave below, two octaves below, and one octave above your guitar's original tone. Just like the original Pearl OC-07 the Zeta Sound Pearl Octaver OC-7 has four controls that let you add a tone that is one octave below, two octaves below and also one octave above with the dry signal. These controls are fully independent, so you can create various octave sounds.

The Octaver lets you add one and/or two octaves below an original tone. Just like the original Pearl OC-07 the Zeta Sound Pearl Octaver OC-7 has four controls that let you add a tone that is one octave below, two octaves below and also one octave above with the dry signal. These controls are fully independent, so you can create various octave sounds.

"1590b" enclosure size (4.37" X 2.37" X 1.07"), save space on your pedalboard!

"The Green Thing" is the Chicago Stompworks clone recreation of the Tubescreamer TS808 pedal - it's a true handbuilt boutique piece, comparable to the handwired TS clone that retails for nearly $300. Don't sleep on this one!

• Handbuilt, boutique quality
• True Bypass, 3pdt switching
• Finest quality components throughout, best-in-class Neutrik jacks - built to last
• Standard "Boss Style" center negative 9v adapter, or internal 9v battery
• hand built from the ground up

Inspired by the 1974 Yamaha Super Flighter guitar, the Yamaha Revstar RS620 solidbody electric guitar combines distinctive looks with cutting tone. The mahogany body and flame maple top are contoured for gigging comfort, while the medium neck profile and jumbo frets deliver smooth, precise playability. A pair of Yamaha VH5 humbucking pickups serves up a wide tonal range, further enhanced by the push-pull Dry switch that enables single-coil-like tones. With excellent craftsmanship, distinguished tone, and great playability, the Yamaha Revstar RS620 is an outstanding guitar in its class.

Inspired by the 1974 Yamaha Super Flighter guitar, the Yamaha Revstar RS620 solidbody electric guitar combines distinctive looks with cutting tone. The mahogany body and flame maple top are contoured for gigging comfort, while the medium neck profile and jumbo frets deliver smooth, precise playability. A pair of Yamaha VH5 humbucking pickups serves up a wide tonal range, further enhanced by the push-pull Dry switch that enables single-coil-like tones. With excellent craftsmanship, distinguished tone, and great playability, the Yamaha Revstar RS620 is an outstanding guitar in its class.

The Eminence Legend GB128 guitar speaker helps clean up your act. Cleaner British voiced tone with a full low end, warm, throaty mids and a very open top end. Turn up the volume and turn back the clock.

Nano Tune Strobe is a quick in reaction and super accurate in tune with color LED display. And its tuning mode can be switched strobe mode or meter mode, strobe mode can give you very precise tuning +/- 0.02 cent, meter mode can give you very fast tuning. Also it has true bypass and least popping noise switching system.