yigityigit's Activity

Minihumbucker with toaster style cover (oval or plain slots) . Supplied with black plastic pickup mount ring, height adjustment screws and springs.

7.9K Ohm resistance, 300mm long hook-up wire.

Pickup size 68 x 28.

5 conductor wiring (4 plus shield)- can be wired as a conventional humbucker, or you can use a micro toggle switch for humbucker/single coil options etc.

As used on many of our own guitars, including Hollowbelly's legendary "Pyronator".

These pickups are suitable for 3, 4 and 6 string guitars.

Minihumbucker with toaster style cover (oval or plain slots) . Supplied with black plastic pickup mount ring, height adjustment screws and springs.

7.9K Ohm resistance, 300mm long hook-up wire.

Pickup size 68 x 28.

5 conductor wiring (4 plus shield)- can be wired as a conventional humbucker, or you can use a micro toggle switch for humbucker/single coil options etc.

As used on many of our own guitars, including Hollowbelly's legendary "Pyronator".

These pickups are suitable for 3, 4 and 6 string guitars.

Super neat and powerful twin rail humbucker pickup, Strat sized.

Cream bobbin with chromed rails

12kOhm resistance

5 conductor wiring, so it can be easily coil tapped with SPDT or DPDT switch (not included)

The Echoflanger by PastFx.

Is a recreation of the original vintage EHX Echoflanger, in a super small pedal board friendly package.
This Multi all Analog Effect can produce up to 5 effects, slap back delay/double tracking, chorus, vibrato, flanger, and filter matrix.

Specs:

• True Bypass
• 18v DC operation 2.1mm Boss style negative tip jack, does not use potentially noisy surge pump / voltage inverter IC's sometimes used in 18v pedal circuits.
• Uses 2 x vintage Panasonic BBD's.
• Blend control instead of a switch.
• When in Chorus mode, a Vibrato effect can be achieved by turning the Blend control fully counter clockwise.
• LED Mode indicator - LFO flashing for chorus/flanger, static for Slapback and Matrix settings
• New Input filter switch
• New internal threshold trimpot.
• The threshold control introduces a rudimentary gating control at low levels which can help prevent noise the circuit is prone to generate particularly during silent passages.
• This can be adjusted to taste, however it is calibrated by default in an "Off" setting (FCW).
• The pedals noise and quirks are at their most noticeable when in flange mode with width rate and feedback at maximum settings.
• The PastFx Echoflanger is not based on the EHX Poly Chorus reissues, as the original versions were always mono + dry output.(Due to space restrictions we have omitted the DRY out.)
• The Poly Chorus reissues used a psuedo stereo reversed phase output.
• Our circuit is not a recreation of a DIY pcb project.
• We are in possession of original vintage units including Echoflanger, Poly Flange & Poly Chorus.
• These units do vary due to age, however they have been a key reference in the PastFx's design.

*Please note: Our Echoflanger is based on the original 1970's EHX Echoflanger circuit.
This effect was also sold as the Poly Flange & Poly Chorus.
The Poly Chorus was reissued twice starting in the 1990's with a "stereo" big box version then several years later a smaller version.
These versions use a different circuit compared to the vintage units.
We have incorporated a couple of adjustable internal mods to improve on the noise issues found in the original and its adaption to the Panasonic BBDs.
Incorporates an internal volume trim pot to rectify the famous volume drop found on many a EHX vintage pedal.
1590B enclosure size (the smallest recreation of the original circuit that we know of)
Current draw 80 mA. Only high quality audio style power supplies to be used. (eg Cioks dc7 and equivilent) This is the nature of the beast of this circuit.
Included some adjustable mods to mitigate these behaviours. One of the unusual aspects of the Echoflanger is that it has access to a feedback control while in Chorus mode. Generally speaking most chorus pedals do not incorporate a feedback control. Kurt Cobain famously made use of feedback in chorus mode in Nirvana's In Utero song "Radio Friendly Unit Shifter" This is why the Echoflanger has been so sought after for those wishing to replicate these sounds

The Echoflanger by PastFx.

Is a recreation of the original vintage EHX Echoflanger, in a super small pedal board friendly package.
This Multi all Analog Effect can produce up to 5 effects, slap back delay/double tracking, chorus, vibrato, flanger, and filter matrix.

Specs:

• True Bypass
• 18v DC operation 2.1mm Boss style negative tip jack, does not use potentially noisy surge pump / voltage inverter IC's sometimes used in 18v pedal circuits.
• Uses 2 x vintage Panasonic BBD's.
• Blend control instead of a switch.
• When in Chorus mode, a Vibrato effect can be achieved by turning the Blend control fully counter clockwise.
• LED Mode indicator - LFO flashing for chorus/flanger, static for Slapback and Matrix settings
• New Input filter switch
• New internal threshold trimpot.
• The threshold control introduces a rudimentary gating control at low levels which can help prevent noise the circuit is prone to generate particularly during silent passages.
• This can be adjusted to taste, however it is calibrated by default in an "Off" setting (FCW).
• The pedals noise and quirks are at their most noticeable when in flange mode with width rate and feedback at maximum settings.
• The PastFx Echoflanger is not based on the EHX Poly Chorus reissues, as the original versions were always mono + dry output.(Due to space restrictions we have omitted the DRY out.)
• The Poly Chorus reissues used a psuedo stereo reversed phase output.
• Our circuit is not a recreation of a DIY pcb project.
• We are in possession of original vintage units including Echoflanger, Poly Flange & Poly Chorus.
• These units do vary due to age, however they have been a key reference in the PastFx's design.

*Please note: Our Echoflanger is based on the original 1970's EHX Echoflanger circuit.
This effect was also sold as the Poly Flange & Poly Chorus.
The Poly Chorus was reissued twice starting in the 1990's with a "stereo" big box version then several years later a smaller version.
These versions use a different circuit compared to the vintage units.
We have incorporated a couple of adjustable internal mods to improve on the noise issues found in the original and its adaption to the Panasonic BBDs.
Incorporates an internal volume trim pot to rectify the famous volume drop found on many a EHX vintage pedal.
1590B enclosure size (the smallest recreation of the original circuit that we know of)
Current draw 80 mA. Only high quality audio style power supplies to be used. (eg Cioks dc7 and equivilent) This is the nature of the beast of this circuit.
Included some adjustable mods to mitigate these behaviours. One of the unusual aspects of the Echoflanger is that it has access to a feedback control while in Chorus mode. Generally speaking most chorus pedals do not incorporate a feedback control. Kurt Cobain famously made use of feedback in chorus mode in Nirvana's In Utero song "Radio Friendly Unit Shifter" This is why the Echoflanger has been so sought after for those wishing to replicate these sounds

The Degenerate was the second guitar designed for the Odessa stable and with a slightly more ‘punk rock’ sensibility, it provides an understated contrast to the DeadBeat. The body though retaining the familiar flat butt edge™ still boasts restrained contouring that allows for a transformative playing experience. The Degenerate is perfect when paired with Humbuckers, but works magnificently with any other pickup combination. This one is ready to take on the world.

Specs:

Body timbers – Ash, Oak, Horse Chestnut, Black Walnut etc.

Neck timbers – usually Maple, but happy to use other timbers, just ask.

Fingerboard timbers – Ebony, Bog Oak, Pau Ferro, Marblewood, Black Walnut etc

Scale Length – happy to accommodate most scale lengths, just ask.

Hardware – essentially your choice, but Hipshot tuners and bridges work well with my builds.

Pickups – again, your choice, but favourites include Fletcher pickups, Lollars, and many others.

Good quality hardware include CTS pots and Switchcraft switches Pickguards are hand-cut from aluminium and either powder-coated black or left raw.

Finishes – Milk paint, which allows for the grain and texture of the timber to be seen, or an oiled finish.

Hard case included.

Single pickup version and left-handers available.