Caleb Followill

Used for the vocals on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview. An image for the vocal settings can be found here.

• Vocals: Sound Toys Echoboy, Audio Ease Altiverb, Massenburg DesignWorks EQ, Neve 1099, Urei 1176, Dbx 902, Dolby A encoder, Teletronix LA3A

"I had a Sound Toys Echoboy delay and an Altiverb reverb, set to the EMT 140 plate, on the vocals. In fact, there are two or three delays and two or three reverbs in total, different amounts in different sections of the song. I had a Massenburg plug–in EQ on the vocal bus, and underneath it you can see my insert signal chain: Neve 1099 EQ/Urei Blue Stripe 1176/Dbx 902 de–esser. I pre-mix in my computer and things are coming out in stems, and going out into the desk and the Folcrom mixer for mixdown to stereo. The 1099/1176/902 were inserted in the analogue realm and daisy-chained. There's also a distant lead double in the chorus. I call that a performed effect. Instead of using a delay and modulation to get something in the background, you record a second performance in a different space and with a different microphone. You get something more deliberate and unique that way. Finally, once it came to summing, I also added some Dolby A to the vocals, which gives an excited high-frequency sound that I sent through an LA3A and blended back in."

Used for the vocals and electric guitar on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview. An image for the vocal settings can be found here.

• Vocals: Sound Toys Echoboy, Audio Ease Altiverb, Massenburg DesignWorks EQ, Neve 1099, Urei 1176, Dbx 902, Dolby A encoder, Teletronix LA3A

"I had a Sound Toys Echoboy delay and an Altiverb reverb, set to the EMT 140 plate, on the vocals. In fact, there are two or three delays and two or three reverbs in total, different amounts in different sections of the song. I had a Massenburg plug–in EQ on the vocal bus, and underneath it you can see my insert signal chain: Neve 1099 EQ/Urei Blue Stripe 1176/Dbx 902 de–esser. I pre-mix in my computer and things are coming out in stems, and going out into the desk and the Folcrom mixer for mixdown to stereo. The 1099/1176/902 were inserted in the analogue realm and daisy-chained. There's also a distant lead double in the chorus. I call that a performed effect. Instead of using a delay and modulation to get something in the background, you record a second performance in a different space and with a different microphone. You get something more deliberate and unique that way. Finally, once it came to summing, I also added some Dolby A to the vocals, which gives an excited high-frequency sound that I sent through an LA3A and blended back in."

(...) Guitars: Massenburg DesignWorks EQ, Sound Toys Echoboy, Cooper Time Cube, Digidesign delay, Audio Ease Altiverb

(...) "I also used an Echoboy for delay on certain sections, like in the choruses. There was a little bit of bus compression on the guitars and a little bit of EQ, all very minor stuff, because I had already recorded what I wanted. The only radical EQ is on the Cooper Time Cube delay, which I described above, and which I applied to Caleb's guitar. I took out everything below 861Hz to get rid of the darker tone that was obscuring the source tone a bit. There's also a bit of Digirack delay on Caleb's guitar, to give it a bit more dimension by panning it to the other side than the track itself."

Used for the vocals and electric guitar on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview. An image of the settings for the "vocal buss" can be found here.

• Vocals: Sound Toys Echoboy, Audio Ease Altiverb, Massenburg DesignWorks EQ, Neve 1099, Urei 1176, Dbx 902, Dolby A encoder, Teletronix LA3A

"I had a Sound Toys Echoboy delay and an Altiverb reverb, set to the EMT 140 plate, on the vocals. In fact, there are two or three delays and two or three reverbs in total, different amounts in different sections of the song. I had a Massenburg plug–in EQ on the vocal bus, and underneath it you can see my insert signal chain: Neve 1099 EQ/Urei Blue Stripe 1176/Dbx 902 de–esser. I pre-mix in my computer and things are coming out in stems, and going out into the desk and the Folcrom mixer for mixdown to stereo. The 1099/1176/902 were inserted in the analogue realm and daisy-chained. There's also a distant lead double in the chorus. I call that a performed effect. Instead of using a delay and modulation to get something in the background, you record a second performance in a different space and with a different microphone. You get something more deliberate and unique that way. Finally, once it came to summing, I also added some Dolby A to the vocals, which gives an excited high-frequency sound that I sent through an LA3A and blended back in."

(...) Guitars: Massenburg DesignWorks EQ, Sound Toys Echoboy, Cooper Time Cube, Digidesign delay, Audio Ease Altiverb

(...) "I also used an Echoboy for delay on certain sections, like in the choruses. There was a little bit of bus compression on the guitars and a little bit of EQ, all very minor stuff, because I had already recorded what I wanted. The only radical EQ is on the Cooper Time Cube delay, which I described above, and which I applied to Caleb's guitar. I took out everything below 861Hz to get rid of the darker tone that was obscuring the source tone a bit. There's also a bit of Digirack delay on Caleb's guitar, to give it a bit more dimension by panning it to the other side than the track itself."