a_k_watson's Activity

It’s Hip to Be Square. With the new Micro Cube, guitarists get a genuine Roland Cube amp in an ultra-compact package that even runs on batteries. Weighing in at just few pounds, the Micro Cube packs a big punch and comes with six DSP effects, COSM® Amp Modeling and a new Digital Tuning Fork—giving guitarists everything they need for killer tone on the go.

Rock for 20 Hours on Batteries The Micro Cube is the first Cube amplifier that runs on battery or AC power. Using six “AA” alkaline batteries, you can play for up to 20 hours—thanks to the Micro Cube’s high-efficiency amplifier. A carrying strap is also included, allowing you to be heard just about anywhere you want. And the sound? It’s a Cube, so you know it sounds great!

7 Classic and Modern Amp Models Looking for the sound of Roland’s JC-120 Jazz Chorus or your favorite British combo amp? You’ll find those and more in the Micro Cube, thanks to seven COSM® amp models. Roland’s COSM technology is the only modeling method that captures every nuance of the original amps—from the preamp and circuits to the speaker. All you need is the Micro Cube for perfect tone.

High-Quality BOSS Effects There’s no need to lug around pedals when the Micro Cube comes with six DSP effects. All the essentials are included—from chorus and flanging to a phaser and tremolo effect. A separate Delay/Reverb processor lets you dial in anything from slapback and long delays to reverb and more (in addition to using one of the aforementioned modulation effects).

New Digital Tuning Fork and More Tuning up is a snap using the new Digital Tuning Fork. Just press the Tuning Fork button (the harder you hit it the louder the sound) and you get an instant reference tone with support for flat tunings up to two semitones. The Micro Cube also comes with a choice of 1/4-inch and 1/8-inch stereo Auxiliary inputs—great for connecting a CD player or line-level instrument—plus a Recording/Headphones output. Take a Cube anywhere you go!

Rated Power Output 2 W

Nominal Input Level INPUT: -10 dBu AUX IN: -10 dBu

Speaker 12 cm (5 inches) x 1

Controls

• TYPE Switch
• GAIN Knob
• VOLUME Knob
• TUNING FORK Button
• KEY Switch
• TONE Knob
• EFX (Chorus/Flanger/Phaser/Tremolo) Knob
• DELAY/REVERB Knob
• POWER Switch

Connectors INPUT Jack: 1/4" phone type REC OUT/PHONES Jack: Stereo 1/4" phone type AUX IN Jacks: Stereo 1/4" phone type, Stereo miniature phone type AC Adaptor Jack

Power Supply DC 9 V: AC Adaptor or Dry Battery (LR6 (AA) type) x 6

Current Draw 185 mA

Accessories - AC Adaptor - Strap - Owner's Manual

Size and Weight ( excl. AC Adaptor and Battery )

Width 244 mm 9-5/8 inches

Depth 166 mm 6-9/16 inches

Height 226 mm 8-15/16 inches

Weight 3.3 kg 7 lbs. 5 oz.

• 6 great wah’s of the 60’s in one pedal!

• 2 banks of wah sounds—foot switch between banks for 2 different wah sounds during performance!

• Built in "Octave Distortion" for very cool 60’s octave effects!

• Ultra cool late 40’s car styling!

• Available in Black, Red and Purple!

Epiphone’s Inspired by Gibson™ Collection proudly presents the Les Paul™ Standard 50s! This guitar lovingly recreates the feel and tone of the 1950s-era Les Pauls. Epiphone’s long friendship with Mr. Les Paul began in 1940 when Les built one of the world’s first solidbody electric guitars while working nights at the original Epiphone factory in Manhattan. Les’ first solidbody guitar, nicknamed “the Log,” would go on to inspire the Les Paul Standard, which many consider the greatest electric guitar ever made. The guitar is crafted with a mahogany body, maple cap (AAA veneer on figured tops), bound 50s shaped mahogany neck with long neck tenon, Indian laurel fingerboard with classic trapezoid inlays, Epiphone's Vintage Deluxe tuners, a pair of critically acclaimed Epiphone Probucker™ humbuckers™, and gold Top Hat knobs with dial pointers. Available in Metallic Gold, Vintage Sunburst, and Heritage Cherry Sunburst full-gloss finishes. This Epiphone Inspired by Gibson Original model also has the Kalamazoo headstock, a rolled neck for a comfortable feel, Graph Tech® NuBone® nut, era-appropriate wiring, and CTS® pots. An optional hardshell or EpiLite™ case is available.

Body

• Body Style Les Paul
• Body Shape Les Paul
• Body Material Mahogany
• Top Carved Hard Maple Cap with AAA Flame Maple Veneer
• Binding Cream
• Body Finish Gloss

Neck

• Profile 50s Rounded Medium C
• Scale Length 628.65 mm / 24.75 in
• Fingerboard Material Laurel
• Fingerboard Radius 304.8 mm / 12 in
• Neck Material Mahogany
• Fret Count 22
• Frets Medium Jumbo
• Nut Material Graph Tech® NuBone®
• Nut Width 43.0 mm / 1.692 in
• Inlays Trapezoid
• Joint Glued in; Set Neck

Hardware

• Finish Nickel
• Bridge Epiphone LockTone™ Tune-O-Matic™
• Tailpiece Epiphone LockTone™ Stop Bar
• Tuning Machines Epiphone Vintage Deluxe 18:1 ratio machine heads
• Pickguard 1-Ply; Cream PVC
• Truss RodAdjustable
• Truss Rod Cover "Bell Shaped"; 2-layer (Black/White) E
• Control Knobs Gold Top Hat
• Strap Buttons 2 - bottom and shoulder
• Pickup Covers Nickel

Electronics

• Neck Pickup Epiphone ProBucker™ 1
• Bridge Pickup Epiphone ProBucker™ 2
• Controls 2 Volume, 2 Tone, CTS® pots, 50s style wiring
• Pickup Selector 3-way Epiphone toggle
• Output Jack 1/4"

Disclaimer: In order to continually improve the design, quality and performance of our products and instruments and to make use of the best materials at all times, Epiphone reserves the right to change specifications without notice.

The new 10 Band EQ is based on our CP-24 10 Band EQ, now with an added volume channel. You can really fine tune your tone with this EQ pedal due to the massive range of channels - 31.25Hz, 62.5Hz, 125Hz, 250Hz, 500Hz, 1k Hz, 2k Hz, 4k Hz, 8k Hz and 16k Hz. With volume and gain control the CP-81 is durable and easy to use. It's True Bypass design so it won't impact your tone when off (although it should be on most of the time). Not only does it works well with guitar but also other instruments.

Features:

• Aluminium alloy casing

• Power Requirement: 9V DC center negative

• Current consumption: 300mA

• Product Dimensions: 12x9.4x3.8cm

• Weight: 0.35kg

The new 10 Band EQ is based on our CP-24 10 Band EQ, now with an added volume channel. You can really fine tune your tone with this EQ pedal due to the massive range of channels - 31.25Hz, 62.5Hz, 125Hz, 250Hz, 500Hz, 1k Hz, 2k Hz, 4k Hz, 8k Hz and 16k Hz. With volume and gain control the CP-81 is durable and easy to use. It's True Bypass design so it won't impact your tone when off (although it should be on most of the time). Not only does it works well with guitar but also other instruments.

Features: - Aluminium alloy casing - Power Requirement: 9V DC center negative - Current consumption: 300mA - Product Dimensions: 12x9.4x3.8cm - Weight: 0.35kg

The new 10 Band EQ is based on our CP-24 10 Band EQ, now with an added volume channel. You can really fine tune your tone with this EQ pedal due to the massive range of channels - 31.25Hz, 62.5Hz, 125Hz, 250Hz, 500Hz, 1k Hz, 2k Hz, 4k Hz, 8k Hz and 16k Hz. With volume and gain control the CP-81 is durable and easy to use. It's True Bypass design so it won't impact your tone when off (although it should be on most of the time). Not only does it works well with guitar but also other instruments.

Features:

• Aluminium alloy casing

• Power Requirement: 9V DC center negative

• Current consumption: 300mA

• Product Dimensions: 12x9.4x3.8cm

• Weight: 0.35kg

The Zoom G3 guitar pedal opens the door to a new level of creativity. It offers 94 effects, along with 22 amp and cabinet models, and allows you to chain up to six of them together for full multi-effect complexity. Three stompbox-style displays—each with its own dedicated foot switch and control knobs—make it easy to edit effects and bring them in and out as needed. Advanced features like an onboard chromatic tuner, balanced line-level output, USB port, and integrated rhythm patterns and looper complete the picture. Both onstage and in the studio, you can count on your G3 to deliver the great sound you need from a guitar pedal.

Over a hundred different ways to craft your sound

The G3 provides a whopping 116 different onboard DSP effects and amp/cabinet models.

These include compressors, noise gates, filters, equalizers, and wah effects, as well as boosters, overdrives, fuzzes, phasers, and flangers, plus chorus, pitch shift, tremolo, vibrato—even ring modulation. There are simulations of both classic and contemporary pedals such as the MXR Dynacomp and Distortion+, Moog MF-101, Ibanez TS808, Marshall Guv'nor, Fuzz Face, Big Muff, Pro Co Rat, ADA Flanger, and Boss OD-1, DS-1, Metal Face, and CE-1. Original effects include Zoom's Noise Reduction (ZNR) algorithm and ExtremeDS, which offers the most powerful gain of any distortion effect in the world. You'll also find 20 delays and natural-sounding reverbs here, including rooms, halls, arenas, plates, springs, and tape delay simulators, as well as dual effects such as chorus/delay, compressor/overdrive, and delay/reverb.

The 22 amp models provided by the G3 include emulations of both vintage and modern tube and solid-state amplifiers from manufacturers like Fender, Marshall, Matchless, Mega Boogie, Sound City, Hiwatt, Orange, Two Rock, Diezel, and ENGL, each with its own distinct cabinet modeling that can be used to further alter the tonal quality. What's more, you can pair any amp model to any cabinet model for unusual, and often striking effects. You can even match the output of a given amp/cabinet model to the actual setup you're playing through (options include Line, Combo Front, Stack Front, Combo Power Amp, and Stack Power Amp).

NOTE: Manufacturer names and product names are trademarks or registered trademarks of their respective owners. The names are used only to illustrate sonic characteristics and do not indicate any affiliation with the Zoom Corporation or Zoom North America.

Easy to use and packed with power

The intuitive design of the G3 allows easy navigation in both live and studio settings and makes creating, saving, and rearranging effects a breeze. Three LCD screens, each with corresponding foot switches and parameter knobs, form a large graphical interface that allows you to view and edit multiple effects at a glance.

Up to 6 effects can be used simultaneously, arranged in any order you like, and signal flow can be reversed at the touch of a button. 100 patch memories are provided for the storage of custom edited and chained multi-effects, all pre-loaded with useful factory settings. Changing patches is near-instantaneous and requires just a tap of a foot switch.

A standard ¼" input jack and passive/active switch allow you to plug any electric guitar into the G3. Outputs are provided on dual ¼" (one stereo, one mono) and balanced XLR output jacks, enabling the unit to be connected to headphones, amplifiers, or line-level devices (pre- or post-effect) such as external effects devices, recorders, and mixing boards.

Only 4 AA batteries—either alkaline or rechargeable NiMH—are required for power, or you can use the supplied AC adapter. Battery life is up to 6 hours when using alkaline batteries, and an "Eco" setting automatically powers the unit off if unused for extended periods.

Advanced features

The G3 offers a slew of advanced features, including a built-in chromatic tuner that supports a variety of standard guitar tunings—even drop tunings. A Tap Tempo function allows you to to set delay times and modulation effect frequencies in real time to the rhythm of the song you're playing. There are 41 realistic-sounding rhythm patterns too—PCM samples of drums being played in a variety of different genres and time signatures.

It's easy to create full orchestrations with your G3. An onboard Looper enables you to layer up to 40 seconds of performance (through the effect or effects of your choice) in high quality 16-bit 44.1kHz audio. The Looper can also be used in conjunction with rhythm accompaniments, allowing you to play along with the pattern of your choice.

Using your G3 with a computer

The G3 has a USB port for connection to any Macintosh or Windows computer, allowing it to act as a 2-input / 2-output audio interface. Simply launch your DAW or the included Steinberg Cubase LE software and start laying down tracks. Direct monitoring during recording ensures zero latency, allowing you to overdub with ease.

The G3 is also fully compatible with Zoom's Edit & Share software, available below as a free download. This easy to use software allows you to catalog, edit, and share your patches. Powerful sorting tools help you quickly find exactly the sound you're after, then drag, drop, and reload them in whatever order you need for your next gig—easy to do with a laptop even if you're on the road.

State of the art editing with every G3

The Zoom G3 comes with a free download license for Sternberg’s Cubase LE music production software, providing not just the ability to create incredible guitar sounds in every box, but to do spectacular things with it.

Take your recordings to a more professional level. Steinberg’s powerful and state-of-the-art audio software used by creators around the world now comes with every Zoom G3, G3X, and G5 purchase.

Currently shipping with: Cubase LE8 for Mac OS X 10.9/10.10/10.11 and Windows 7/8/8.1/10

For information on license activation and upgrades, visit our Steinberg Software support page.

Features at a glance

• 94 effects, including distortion, compression, modulation, delay, and reverb
  
• 22 amp / cabinet models
• 3 backlit LCDs with contrast control
  
• Intuitive user interface
• Ultra-fast (1ms) patch change speed
• Up to 6 effects can be used simultaneously, chained together in any order
• 100 memory locations for the storage of user-created patches
• 100 factory preset patches
• Store and Swap functions make patch organization a breeze
• Auto Save function for automatic saving of all patch parameters
• Onboard chromatic tuner supports all standard guitar tunings, including open and drop tunings
• Tuner range of 435 – 445 Hz
• Looper allows recording of up to 40 seconds of CD-quality phrase recording
• 41 built-in rhythm patterns which can be used in conjunction with the Looper
• Easily integrated into any existing pedalboard
• Input jack accepts standard mono guitar cable
• Active/Passive switch
  Control input for external foot switch or expression pedal
• Dual output jacks for connection to amps or headphones
• Balanced XLR output jack with ground lift for DI connection (pre- or post-effect) to line-level devices, mixing boards, and recorders
• Runs on 4 AA batteries, with alkaline battery life of more than 6 hours
• Included AC adapter USB port for bus power and firmware updates
• 2-in/2-out USB audio interface for PC/Mac computers
• Compatible with Zoom Edit&Share patch software Includes Steinberg Cubase LE recording software

Accessories

Here's what comes included with the G3:

• Operation manual
• AC adapter (Zoom AD-16)
• Steinberg Cubase LE recording software

Optional accessories

• FP01/FP02 expression pedal
• FS01 foot switch

POD The Ultimate Guitar Direct Box Version 2.0

The ultimate guitar Direct Recording tool with acclaimed Line 6 Modeling and built-in Stereo Effects. This baby can also be used as a Tone-shaping front end for any Guitar Amp, Live PA, or with Headphones.

Using a POD Mount, the POD can be secured to a standard microphone stand or slip underneath an amplifier handle.

POD 2.0 Specifications

• Amp Models 32 , customizable
• Digital Effects 16
• Factory/ User Presets 36
• Headphone & Direct Out 1/4 inch TRS
• Power N/A
• Mono/ Stereo Stereo
• Configuration N/A

Just so you don't feel left out, the Remote pedal input is fully compatible with the Line 6 Floor Board and FB4 foot controllers, which add:

• Remote access to all channels and tap tempo
• Chromatic tuner access (Floor Board only)
• Wah and volume pedals (Floor Board only)
• Stomp Box-style effects on/off (Floor Board only)

Get all the spank, sparkle and twang your heart desires from this fantastic emulation of a classic American blues combo. Based on one of the most popular 40Watt tube amps in the world today, US CLASSIC DELUXE is a great choice for soul, funk, blues, country and classic rock players alike.

MOOER micro preamps are sonically accurate digital recreations of the preamp sections of popular tube amplifiers. We have developed these by directly analyzing real tube amplifiers using a brand new technology to capture their sound, dynamics and response. Each Micro Preamp comes complete with dual channels, integrated speaker cabinet simulation and dual operating modes to suit the needs of all users.

Initially we are releasing a set of 10 models, each based on a different popular tube amplifier from a range of manufacturers. These have been designed to be used with the upcoming MOOER power amp or in the effects return of any standard guitar amplifier. The speaker cab simulation allows the user to connect direct to a soundcard, powered monitor or P.A. without the need for a guitar amp or speaker cab at all.

Features

• High quality dual channel preamp
• Independent 3 band EQ, Gain and Volume controls for each channel
• Speaker cabinet simulation on/off
• 2 different modes for footswitch operation. On/Off or channel A/B

Connections

1.DCIN: Connect a DC 9V 300mA centre pin negative power supply

2.INPUT: Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

3.OUTPUT: Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)

Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

Specification

• Modes：Delay and reverb effects with tap tempo functionality.
• Input：1/4” mono audio jack (Impedance: 1 meg Ohms）
• Output：1/4” mono audio jack (Impedance: 100 Ohms）
• Power requirements: AC adapter 9V DC , center negative.（Highly recommend to use Mooer Micro Power.）

Capture the very essence of classic British crunch with the UK GOLD 900. Based on one of the very staples of “in-house amplification” at venues and studios all over the world, this preamp sports the characteristic mid bite that shaped the sound of modern rock music as we know it.

MOOER micro preamps are sonically accurate digital recreations of the preamp sections of popular tube amplifiers. We have developed these by directly analyzing real tube amplifiers using a brand new technology to capture their sound, dynamics and response. Each Micro Preamp comes complete with dual channels, integrated speaker cabinet simulation and dual operating modes to suit the needs of all users.

Initially we are releasing a set of 10 models, each based on a different popular tube amplifier from a range of manufacturers. These have been designed to be used with the upcoming MOOER power amp or in the effects return of any standard guitar amplifier. The speaker cab simulation allows the user to connect direct to a soundcard, powered monitor or P.A. without the need for a guitar amp or speaker cab at all.

Features

• Modes：Delay and reverb effects with tap tempo functionality.
• Input：1/4” mono audio jack (Impedance: 1 meg Ohms）
• Output：1/4” mono audio jack (Impedance: 100 Ohms）
• Power requirements: AC adapter 9V DC , center negative.（Highly recommend to use Mooer Micro Power.）

Connections

1.DCIN:

Connect a DC 9V 300mA centre pin negative power supply

2.INPUT:

Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.

3.OUTPUT: Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)

Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes

Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)

Specification

• Modes：Delay and reverb effects with tap tempo functionality.
• Input：1/4” mono audio jack (Impedance: 1 meg Ohms） Output：1/4” mono audio jack (Impedance: 100 Ohms）
• Power requirements: AC adapter 9V DC , center negative.（Highly recommend to use Mooer Micro Power.）
• Current Draw:300mA
• Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
• Weight:160g

At a Glance: * VOX Valve Reactor (using a 12AX7/ECC83 dual triode as a power amp tube) circuit delivers the sound and feel of actual tube power amps * 16 amp models ranging from vintage classics to modern "boutique" standards * 10 cabinet models add even more variety and authenticity * 22 modeled effects with quality that rivals stand-alone units * Heavy-duty construction * Familiar knob-based interface for ease of use * 96 programs * Headphone output * Optical digital out (S/P DIF) for digital recording (Tonelab Only) * Dedicated editor software for even more detailed editing * MIDI I/O * Optional Valvetronix series foot controller for even more performance possibilities * Backlit LCD with easily viewed LED-like display

VOX Valve Reactor circuit delivers true tube sound The power amp section on the ToneLab range features our patented VOX Valve Reactor circuitry that was introduced in our Valvetronix amplifiers. This unique technology enables ToneLab and Tonelab SE to provide the sound, feel and dynamic range that, until now, were only possible with a multitude of all-tube amplifiers. The Valve Reactor circuit uses a 12AX7/ECC83 dual triode vacuum tube, a virtual output transformer and a dummy speaker circuit that simulates impedance changes of a real speaker. In other words though the output power (level) is low, it has the same power amp circuit as an actual full-tube amp, and faithfully reproduces the response of the power amp circuits of the original amp that is being modeled. It reconfigures itself so that its characteristics are the same as the amps it's modeling (class A, class AB, negative feedback circuit, etc.) This means that all of the nuances of the original amp model including sound, feel, distortion and presence are reproduced.

Sophisticated modeling technology Starting with VOX's own AC30, the 16 types of historic amp sounds in Tonelab and Tonelab SE range from hard-to-obtain vintage amps to costly high-end amps. From clean sounds to extreme high-gain distortion, these models cover a wide range of tonal possibilities. Cabinet modeling reproduces the acoustical character of ten different types of cabinet shapes and speaker types. Even when you use the line output for direct recording, ToneLab delivers a superb sense of spatial realism and depth.

22 amazing built-in effects Each one of the 22 effects in ToneLab and ToneLab SE is a carefully crafted model of one of a variety of sought after classic and popular effects. These are organized into categories of Drive, Modulation, Delay, and Reverb, and deliver quality that rivals stand-alone units. From standard effects such as compressor, overdrive, chorus, and tremolo, through to effects like rotary speaker, acoustic simulator, tape echo, and auto wah, this single unit is all you need to create a rich variety of effect sounds.

96 different programs A combination of amps, cabinets, and effects can be set up as one of 96 programs, so you can recall all your favorite settings instantly. The 48 preset programs cover a wide range of sounds, and let you start experiencing ToneLab's amazing sound right away.

All the right ins and outs Perfect for recording and live performance, ToneLab includes everything you need for killer guitar sound. The LINE/AMP switch on ToneLab and ToneLab SE lets you send the ideal signal to any connected device, so you can enjoy the ToneLab's real tube sound whether it is connected directly to a mixer or MTR for direct line recording or to another amp for live performance on stage and the headphone out is just what you need for late-night practicing. Of course, ToneLab's digital output is indispensable for recording in a digital environment.

Heavy-duty looks and intuitive knob-based operation The design of both ToneLab and ToneLab SE complements its superior features, with heavy-duty metal construction and control knobs that make operation easy and intuitive. Program names, parameter values, and original values are displayed in the LCD screen, which is backlit for excellent visibility. Valve icons show the number and model of the power tubes used in the original amp being modeled.

Dedicated editor software for even more detailed editing Dedicated editor software for ToneLab and ToneLab SE is provided, and also can be downloaded from our website. This software enables you to be in complete control of your sound, so that you can tweak it to a level beyond what is available on the front panel. The software also lets you manage an unlimited number of programs.

Optional foot controller You can use an optional VC-4 foot controller for ToneLab to switch programs, control the volume or effect parameters, switch effects on/off, set the delay time, or access the tuner --- a great convenience for live performances.

Tonelab Specification * Amp Models: 16 types * Cabinet Models: 10 types * Effects: 22 types (Drive:10 types, Modulation: 5 types, Delay: 3 types, Reverb: 3 types, * Noise Reduction:1 type) * Programs: 96 (24 Bank x 4 Channel) / In/Outputs: Guitar Input, 2 x Output (1/4" Phone Jack), 1 x Digital Out (S/P DIF) - ToneLab only, 1 x VOX Bus, 1 x Headphone Out (ToneLab only), MIDI IN/OUT * Tuner Measurement Range: 27.5 Hz-2,093 Hz (A0-C7) * Calibration: A = 438-445 Hz * Signal Processing: A/D Conversion 20bit, D/A Conversion 20bit, Sampling Frequency 44.1KHz * Voltage: Local Voltage * Dimensions (ToneLab): 319(W) x 209(D) x 74(H)mm (excluding knobs, but including cover for Valve) / 319(W) x 213(D) x 79(H)mm (including knobs) * Weight: 2.4 kg (ToneLab) * Power Consumption: TBC. * Accessories: AC/AC Power Supply * Options: VC-4 VOX Foot Controller

https://web.archive.org/web/20031008153520/http://www.voxamps.co.uk/products/tonelab/tonelab.htm

At a Glance: - VOX Valve Reactor (using a 12AX7/ECC83 dual triode as a power amp tube) circuit delivers the sound and feel of actual tube power amps - 16 amp models ranging from vintage classics to modern "boutique" standards - 10 cabinet models add even more variety and authenticity - 22 modeled effects with quality that rivals stand-alone units - Heavy-duty construction - Familiar knob-based interface for ease of use - 96 programs - Headphone output - Optical digital out (S/P DIF) for digital recording (Tonelab Only) - Dedicated editor software for even more detailed editing - MIDI I/O - Optional Valvetronix series foot controller for even more performance possibilities - Backlit LCD with easily viewed LED-like display

VOX Valve Reactor circuit delivers true tube sound The power amp section on the ToneLab range features our patented VOX Valve Reactor circuitry that was introduced in our Valvetronix amplifiers. This unique technology enables ToneLab and Tonelab SE to provide the sound, feel and dynamic range that, until now, were only possible with a multitude of all-tube amplifiers. The Valve Reactor circuit uses a 12AX7/ECC83 dual triode vacuum tube, a virtual output transformer and a dummy speaker circuit that simulates impedance changes of a real speaker. In other words though the output power (level) is low, it has the same power amp circuit as an actual full-tube amp, and faithfully reproduces the response of the power amp circuits of the original amp that is being modeled. It reconfigures itself so that its characteristics are the same as the amps it's modeling (class A, class AB, negative feedback circuit, etc.) This means that all of the nuances of the original amp model including sound, feel, distortion and presence are reproduced.

Sophisticated modeling technology Starting with VOX's own AC30, the 16 types of historic amp sounds in Tonelab and Tonelab SE range from hard-to-obtain vintage amps to costly high-end amps. From clean sounds to extreme high-gain distortion, these models cover a wide range of tonal possibilities. Cabinet modeling reproduces the acoustical character of ten different types of cabinet shapes and speaker types. Even when you use the line output for direct recording, ToneLab delivers a superb sense of spatial realism and depth.

22 amazing built-in effects Each one of the 22 effects in ToneLab and ToneLab SE is a carefully crafted model of one of a variety of sought after classic and popular effects. These are organized into categories of Drive, Modulation, Delay, and Reverb, and deliver quality that rivals stand-alone units. From standard effects such as compressor, overdrive, chorus, and tremolo, through to effects like rotary speaker, acoustic simulator, tape echo, and auto wah, this single unit is all you need to create a rich variety of effect sounds.

96 different programs A combination of amps, cabinets, and effects can be set up as one of 96 programs, so you can recall all your favorite settings instantly. The 48 preset programs cover a wide range of sounds, and let you start experiencing ToneLab's amazing sound right away.

All the right ins and outs Perfect for recording and live performance, ToneLab includes everything you need for killer guitar sound. The LINE/AMP switch on ToneLab and ToneLab SE lets you send the ideal signal to any connected device, so you can enjoy the ToneLab's real tube sound whether it is connected directly to a mixer or MTR for direct line recording or to another amp for live performance on stage and the headphone out is just what you need for late-night practicing. Of course, ToneLab's digital output is indispensable for recording in a digital environment.

Heavy-duty looks and intuitive knob-based operation The design of both ToneLab and ToneLab SE complements its superior features, with heavy-duty metal construction and control knobs that make operation easy and intuitive. Program names, parameter values, and original values are displayed in the LCD screen, which is backlit for excellent visibility. Valve icons show the number and model of the power tubes used in the original amp being modeled.

Dedicated editor software for even more detailed editing Dedicated editor software for ToneLab and ToneLab SE is provided, and also can be downloaded from our website. This software enables you to be in complete control of your sound, so that you can tweak it to a level beyond what is available on the front panel. The software also lets you manage an unlimited number of programs.

Optional foot controller You can use an optional VC-4 foot controller for ToneLab to switch programs, control the volume or effect parameters, switch effects on/off, set the delay time, or access the tuner --- a great convenience for live performances.

Tonelab Specification - Amp Models: 16 types - Cabinet Models: 10 types - Effects: 22 types (Drive:10 types, Modulation: 5 types, Delay: 3 types, Reverb: 3 types, - Noise Reduction:1 type) - Programs: 96 (24 Bank x 4 Channel) - In/Outputs: Guitar Input, 2 x Output (1/4" Phone Jack), 1 x Digital Out (S/P DIF) - ToneLab only, 1 x VOX Bus, 1 x Headphone Out (ToneLab only), MIDI IN/OUT - Tuner Measurement Range: 27.5 Hz-2,093 Hz (A0-C7) - Calibration: A = 438-445 Hz - Signal Processing: A/D Conversion 20bit, D/A Conversion 20bit, Sampling Frequency 44.1KHz - Voltage: Local Voltage - Dimensions (ToneLab): 319(W) x 209(D) x 74(H)mm (excluding knobs, but including cover for Valve) / 319(W) x 213(D) x 79(H)mm (including knobs) - Weight: 2.4 kg (ToneLab) - Power Consumption: TBC. - Accessories: AC/AC Power Supply - Options: VC-4 VOX Foot Controller

https://web.archive.org/web/20031008153520/http://www.voxamps.co.uk/products/tonelab/tonelab.htm

[Caline CP-58 British Sound was renamed CP-58 Baker Street]

Caline CP-58 is based on Tech21 British and is designed to emulate early Marshall amps all the way to heavy JCM 800 line. Very flexible tone shaping controls give you a huge selection of overdrive styles. Get that distinctive Marshall midrange power. Stick it in front of your amp, or go direct into your recording setup or computer. It's that good. · All Analog · Low, Mid, High EQ Controls · Level, Contour, Drive Controls for overdrive shape

Features:True Bypass design, with aluminum alloy casing

Power requirements: AC adapter 9v DC Center Negative

Current consumption: 50mA

Product Dimensions: 11.9x9.4x3.8cm

Weighted:0.41kg

http://web.archive.org/web/20220702194634/http://www.calinemusic.com/products/effectpedal/195.html

[Caline CP-58 British Sound was renamed CP-58 Baker Street]

Caline CP-58 is based on Tech21 British and is designed to emulate early Marshall amps all the way to heavy JCM 800 line. Very flexible tone shaping controls give you a huge selection of overdrive styles. Get that distinctive Marshall midrange power. Stick it in front of your amp, or go direct into your recording setup or computer. It's that good. - All Analog - Low, Mid, High EQ Controls - Level, Contour, Drive Controls for overdrive shape

Features: True Bypass design, with aluminum alloy casing

Power requirements: AC adapter 9v DC Center Negative

Current consumption: 50mA

Product Dimensions: 11.9x9.4x3.8cm

Weighted:0.41kg

*Taken from http://web.archive.org/web/20220702194634/http://www.calinemusic.com/products/effectpedal/195.html *

Description from https://vintageguitarsrus.com/products/vintage-v100-reissued-electric-guitar-lemon-drop on 21 May 2024

The Vintage ReIssued Series V100PGM is a one-of-a-kind classic. A reverse fitted neck pickup combines with out-of-phase centre position wiring to produce a throaty, singing and instantly-identifiable lead tone, ideal for slow blues.

Mismatched tone and volume knobs and a flawless finish ensure the Lemon Drop keeps the mojo working.

Whether you're searching for your first guitar or your last, every member of the Vintage ReIssued Series is a keeper. Play on.

V100PGM Features:

Body: Two piece centre jointed mahogany body, with carved solid maple cap and bookmatched flame maple veneer provides resonance, tone and ‘correct weight’ comfort. The Vintage V100 features a unique, evolutionary body shape, with a graceful descending bass side shoulder and an ingeniously-designed offset heel providing improved access to the upper reaches of the fretboard.

Bridge: Wilkinson T.O.M. enables fine-tuning of each string for superb intonation all over the fretboard.

Pickups: Pair of Wilkinson WVC Double Coils with nickel covers mix traditional appearance with contemporary punch and power. Neck pickup is reverse fitted for unique singing tones.

Controls: Twin master Volume and Tone controls with three-way pickup selector switch, centre position wired out of phase.

Machine heads: Grover® tulip machine heads provide simple, effective action for maximum tuning stability.

Neck: One piece Mahogany with classic Vintage ‘soft C’ profile for instant comfort, speed, accuracy and great feel.

Fingerboard: Rosewood for outstanding tonal transfer, responsiveness and durability with a traditional 12" radius for superb playability and feel.

Scale Length: 24.75" / 628mm.

Frets: 22 Medium Jumbo profile frets add to comfort, accuracy and overall positive feel of the Vintage V100.

Nut: 43mm Graphtech NuBone for smooth and friction-free string bending and tuning.

Headstock: Classic Vintage headstock design for balance and visual appeal.

The V100™ 'Lemon Drop™' is an original Vintage® ReIssued Series guitar designed in the UK by the Vintage® design team.

The Vintage ReIssued Series V100PGM is a one-of-a-kind classic. A reverse fitted neck pickup combines with out-of-phase centre position wiring to produce a throaty, singing and instantly-identifiable lead tone, ideal for slow blues.

Mismatched tone and volume knobs and a flawless finish ensure the Lemon Drop keeps the mojo working.

Whether you're searching for your first guitar or your last, every member of the Vintage ReIssued Series is a keeper. Play on.

V100PGM Features:

Body: Two piece centre jointed mahogany body, with carved solid maple cap and bookmatched flame maple veneer provides resonance, tone and ‘correct weight’ comfort. The Vintage V100 features a unique, evolutionary body shape, with a graceful descending bass side shoulder and an ingeniously-designed offset heel providing improved access to the upper reaches of the fretboard.

Bridge: Wilkinson T.O.M. enables fine-tuning of each string for superb intonation all over the fretboard.

Pickups: Pair of Wilkinson WVC Double Coils with nickel covers mix traditional appearance with contemporary punch and power. Neck pickup is reverse fitted for unique singing tones.

Controls: Twin master Volume and Tone controls with three-way pickup selector switch, centre position wired out of phase.

Machine heads: Grover® tulip machine heads provide simple, effective action for maximum tuning stability.

Neck: One piece Mahogany with classic Vintage ‘soft C’ profile for instant comfort, speed, accuracy and great feel.

Fingerboard: Rosewood for outstanding tonal transfer, responsiveness and durability with a traditional 12" radius for superb playability and feel.

Scale Length: 24.75" / 628mm.

Frets: 22 Medium Jumbo profile frets add to comfort, accuracy and overall positive feel of the Vintage V100.

Nut: 43mm Graphtech NuBone for smooth and friction-free string bending and tuning.

Headstock: Classic Vintage headstock design for balance and visual appeal.

The V100™ 'Lemon Drop™' is an original Vintage® ReIssued Series guitar designed in the UK by the Vintage® design team.

Taken from https://vintageguitarsrus.com/products/vintage-v100-reissued-electric-guitar-lemon-drop on 21 May 2024

MARSHALL™ MOJO IN A BOX Heavily inspired by the tone and feel of the following legendary Marshall™ amps: the non master volume series PLEXI™ Super Lead (1959/1987) & Super Bass (1992) and the master volume series JMP™ & JCM800™ (2203/2204).

Over the years, we have had many different types of Marshall™ amps on our workbench, some for repairs and others for customization. Being huge fans of the sound of these classic amplifiers, that still continues to excite us through the music of so many artists, we decided to try and capture its mojo – the true essence of the soul of this sound – and carefully place it in a little box. Thus the Room #40 was born! Using jfet technology, we tried to stay loyal to the tone and feel of the following legendary Marshall™ amps: the non master volume series PLEXI™ Super Lead (1959/1987) & Super Bass (1992) and the master volume series JMP™ & JCM800™ (2203/2204). We emphasized on emulating the compression and sag coming from the power amp section, when these amps are pushed to the edge, while at the same time giving access to two famous mods, mod #39 (PLEXI™) and mod #34 (JMP™ & JCM800™). Of course the manifestation of our love for the late great Eddie Van Halen, who created the so called “brown sound” using an ohmite variac (variable transformer used to lower or raise the voltage going into the amplifier), could not be absent from this endeavor. Finally, we incorporated the Presence control to make the sound adjustable to any circumstance, regardless of whether you are plugged into the front of an amp that may or may not have a bright cap or even straight to a power amp.

Specs

• Handmade in Athens, Greece • True Bypass • 2 types of Marshall™ circuits PLEXI™ (19)/ JMP™ & JCM800 (22) • Variac voltage control from 7.5V to 21V • Classic Marshall™ 3 band EQ • Versatile Presence control for matching pedal to darker or brighter amps • Gain Boost controlled by a foot-switch and a dedicated trimmer • Power supply : 9V Boss-type DC adapter (center -). Using 10V or more may cause severe damage to the pedal and void warranty Max power consumption : 30mA @ 9V DC • Heavy duty & light weight aluminum box. 73mm(Width) x 123mm(Length) x 55mm(Height) • T.A.W. Limited Life-Time warranty

MARSHALL™ MOJO IN A BOX Heavily inspired by the tone and feel of the following legendary Marshall™ amps: the non master volume series PLEXI™ Super Lead (1959/1987) & Super Bass (1992) and the master volume series JMP™ & JCM800™ (2203/2204).

Over the years, we have had many different types of Marshall™ amps on our workbench, some for repairs and others for customization. Being huge fans of the sound of these classic amplifiers, that still continues to excite us through the music of so many artists, we decided to try and capture its mojo – the true essence of the soul of this sound – and carefully place it in a little box. Thus the Room #40 was born! Using jfet technology, we tried to stay loyal to the tone and feel of the following legendary Marshall™ amps: the non master volume series PLEXI™ Super Lead (1959/1987) & Super Bass (1992) and the master volume series JMP™ & JCM800™ (2203/2204). We emphasized on emulating the compression and sag coming from the power amp section, when these amps are pushed to the edge, while at the same time giving access to two famous mods, mod #39 (PLEXI™) and mod #34 (JMP™ & JCM800™). Of course the manifestation of our love for the late great Eddie Van Halen, who created the so called “brown sound” using an ohmite variac (variable transformer used to lower or raise the voltage going into the amplifier), could not be absent from this endeavor. Finally, we incorporated the Presence control to make the sound adjustable to any circumstance, regardless of whether you are plugged into the front of an amp that may or may not have a bright cap or even straight to a power amp.

Specs

• Handmade in Athens, Greece
• True Bypass
• 2 types of Marshall™ circuits PLEXI™ (19)/ JMP™ & JCM800 (22)
• Variac voltage control from 7.5V to 21V
• Classic Marshall™ 3 band EQ
• Versatile Presence control for matching pedal to darker or brighter amps
• Gain Boost controlled by a foot-switch and a dedicated trimmer
• Power supply : 9V Boss-type DC adapter (center -). Using 10V or more may cause severe damage to the pedal and void warranty Max power consumption : 30mA @ 9V DC
• Heavy duty & light weight aluminum box. 73mm(Width) x 123mm(Length) x 55mm(Height)
• T.A.W. Limited Life-Time warranty

Taken from https://www.voxamps.co.uk/products/ve-cd on 21 May 2024

VE-CD Valve distortion pedal with an all-analog signal path brings iconic amp sounds for your pedalboard. This Copperhead valve distortion pedal recreates a classic full stack amp tone, used for the powerful sound of rock in the 80s. Can be used for overdriven tones or thick distortion. Three output modes - standard pedal, a line-level preamp, and a direct amp-sim.

The Copperhead valve distortion pedal recreates the classic full stack amp tone, used for the powerful sound of hard rock in the 80s. Use it for lightly overdriven tones or thick distortion.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path • Tight and precise modern rock tones • Powered by Nutube • Three output modes for use as a pedal or preamp • Selectable analogue cabinet simulator • OLED display with oscilloscope • Active EQ to shape your signal

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, BRIGHT switch, MODE switch

*POWER SUPPLY ** 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the switch and foot rubber)

WEIGHT 350 g/12.35 oz. (Excluding the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

VE-CD Valve distortion pedal with an all-analog signal path brings iconic amp sounds for your pedalboard. This Copperhead valve distortion pedal recreates a classic full stack amp tone, used for the powerful sound of rock in the 80s. Can be used for overdriven tones or thick distortion. Three output modes - standard pedal, a line-level preamp, and a direct amp-sim.

The Copperhead valve distortion pedal recreates the classic full stack amp tone, used for the powerful sound of hard rock in the 80s. Use it for lightly overdriven tones or thick distortion.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path
• Tight and precise modern rock tones
• Powered by Nutube
• Three output modes for use as a pedal or preamp
• Selectable analogue cabinet simulator
• OLED display with oscilloscope
• Active EQ to shape your signal

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, BRIGHT switch, MODE switch

POWER SUPPLY * 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the switch and foot rubber)

WEIGHT 350 g/12.35 oz. (Excluding the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

Taken from https://www.voxamps.co.uk/products/ve-cd on 21 May 2024

Taken from https://www.voxamps.co.uk/products/ve-ce on 21 May 2024

Inspired by the tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. An all-analog signal path and Nutube allows for genuine overdrive and distortion tones with the feel of a real tube amp. Internally boosted voltage gives greater headroom and dynamics.

The Cutting Edge valve distortion pedal offers aggressive saturated and precise modern metal tones in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by the meticulous and tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path
• Tight and precise modern metal tones
• Powered by Nutube
• Three output modes for use as a pedal or preamp
• Selectable analogue cabinet simulator
• OLED display with oscilloscope
• Active EQ to shape your signal

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, TIGHT knob, MODE switch

POWER SUPPLY * 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the knob and foot rubber)

WEIGHT 350 g/12.35 oz. (Including the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

Inspired by the tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. An all-analog signal path and Nutube allows for genuine overdrive and distortion tones with the feel of a real tube amp. Internally boosted voltage gives greater headroom and dynamics.

The Cutting Edge valve distortion pedal offers aggressive saturated and precise modern metal tones in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by the meticulous and tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path
• Tight and precise modern metal tones
• Powered by Nutube
• Three output modes for use as a pedal or preamp
• Selectable analogue cabinet simulator
• OLED display with oscilloscope
• Active EQ to shape your signal

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, TIGHT knob, MODE switch

POWER SUPPLY * 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the knob and foot rubber)

WEIGHT 350 g/12.35 oz. (Including the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

Taken from https://www.voxamps.co.uk/products/ve-ce on 21 May 2024

Taken from https://www.voxamps.co.uk/products/ve-me on 24 May 2024

Inspired by the Vox AC30’s chime and midrange, the Mystic Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

The Mystic Edge valve distortion pedal offers the chime and midrange of the Vox AC30 in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by the Vox AC30’s chime and midrange, the Mystic Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics. Plus, the OLED display shows an oscilloscope while the pedal is active or bypassed, allowing you to understand exactly how your signal is affected.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path
• Iconic sound of the Vox AC30
• Powered by Nutube
• Three output modes for use as a pedal or preamp
• Selectable analogue cabinet simulator
• OLED display with oscilloscope
• Active EQ to shape your signal

Inspired by the Vox AC30’s chime and midrange, the Mystic Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

The Mystic Edge valve distortion pedal offers the chime and midrange of the Vox AC30 in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by the Vox AC30’s chime and midrange, the Mystic Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics. Plus, the OLED display shows an oscilloscope while the pedal is active or bypassed, allowing you to understand exactly how your signal is affected.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path
• Iconic sound of the Vox AC30
• Powered by Nutube
• Three output modes for use as a pedal or preamp
• Selectable analogue cabinet simulator
• OLED display with oscilloscope
• Active EQ to shape your signal

Taken from https://www.voxamps.co.uk/products/ve-me on 24 May 2024

Taken from https://www.voxamps.co.uk/products/ve-sd on 21 May 2024

Inspired by harmonically rich boutique amp tones, the Silk Drive goes beyond the amp-in-a-box category to offer a truly flexible valve overdrive pedal. The all-analogue signal path and Nutube allow for genuine boost and overdrive tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

The Silk Drive valve overdrive pedal offers the dynamic clean and creamy overdrive tones of classic boutique amps in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by harmonically rich boutique amp tones, the Silk Drive goes beyond the amp-in-a-box category to offer a truly flexible valve overdrive pedal. The all-analogue signal path and Nutube allow for genuine boost and overdrive tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics. Plus, the OLED display shows an oscilloscope while the pedal is active or bypassed, allowing you to understand exactly how your signal is affected.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display shows which mode you are currently using.

• Valve overdrive pedal with all-analogue signal path • Harmonically rich boutique overdrive tones • Powered by Nutube • Three output modes for use as a pedal or preamp • Selectable analogue cabinet simulator • OLED display with oscilloscope • Active EQ to shape your signal

What is the Nutube? Nutube is a new vacuum tube that was developed by KORG Corporation in conjunction with Noritake Itron Corporation as an application of vacuum fluorescent display technology. Like a conventional vacuum tube, a Nutube has an anode grid filament structure, and operates as a complete triode tube. It provides the same rich overtones and response that are distinctive of conventional vacuum tubes.

Analogue circuit design with ample headroom The Valvenergy series is made of all analogue circuits with the 9V power supply voltage boosted to 15V internally. This allows for greater volume and headroom, and delivers an even more dynamic sound. It’s a circuit design that fully utilises the potential of the Valvenergy series.

Three connection modes that you can switch according to your situation You can switch modes as appropriate for the way in which you’re using the pedal. STANDARD: The pedal outputs an instrument-level signal. Connect to the input of your guitar amp in the same way as when using a conventional pedal. PREAMP: The pedal outputs a line-level signal. Connect to the return jack of your amp or to the input of your power amp to then use with a guitar cabinet. CAB-SIM: The pedal outputs a line-level signal with an analogue cabinet simulator. Connect to your mixer or DAW for direct guitar tones.

Equipped with a channel switching function You can chain two pedals together with a standard 1/8” stereo cable through the CH-SW (channel switch) jack of each pedal. This allows you to turn one pedal on while bypassing the other, using the system as if you were switching between channels of a guitar amp. By using a split Y-configuration 1/8” stereo cable you can link three pedals.

OLED display provides visual confirmation of the sound These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings.

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, BRIGHT switch, MODE switch

*POWER SUPPLY ** 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the knob and foot rubber)

WEIGHT 350 g/12.35 oz. (Including the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

Inspired by harmonically rich boutique amp tones, the Silk Drive goes beyond the amp-in-a-box category to offer a truly flexible valve overdrive pedal. The all-analogue signal path and Nutube allow for genuine boost and overdrive tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

The Silk Drive valve overdrive pedal offers the dynamic clean and creamy overdrive tones of classic boutique amps in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by harmonically rich boutique amp tones, the Silk Drive goes beyond the amp-in-a-box category to offer a truly flexible valve overdrive pedal. The all-analogue signal path and Nutube allow for genuine boost and overdrive tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics. Plus, the OLED display shows an oscilloscope while the pedal is active or bypassed, allowing you to understand exactly how your signal is affected.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display shows which mode you are currently using.

• Valve overdrive pedal with all-analogue signal path
• Harmonically rich boutique overdrive tones
• Powered by Nutube
• Three output modes for use as a pedal or preamp
• Selectable analogue cabinet simulator
• OLED display with oscilloscope
• Active EQ to shape your signal

What is the Nutube? Nutube is a new vacuum tube that was developed by KORG Corporation in conjunction with Noritake Itron Corporation as an application of vacuum fluorescent display technology. Like a conventional vacuum tube, a Nutube has an anode grid filament structure, and operates as a complete triode tube. It provides the same rich overtones and response that are distinctive of conventional vacuum tubes.

Analogue circuit design with ample headroom The Valvenergy series is made of all analogue circuits with the 9V power supply voltage boosted to 15V internally. This allows for greater volume and headroom, and delivers an even more dynamic sound. It’s a circuit design that fully utilises the potential of the Valvenergy series.

Three connection modes that you can switch according to your situation You can switch modes as appropriate for the way in which you’re using the pedal. STANDARD: The pedal outputs an instrument-level signal. Connect to the input of your guitar amp in the same way as when using a conventional pedal. PREAMP: The pedal outputs a line-level signal. Connect to the return jack of your amp or to the input of your power amp to then use with a guitar cabinet. CAB-SIM: The pedal outputs a line-level signal with an analogue cabinet simulator. Connect to your mixer or DAW for direct guitar tones.

Equipped with a channel switching function You can chain two pedals together with a standard 1/8” stereo cable through the CH-SW (channel switch) jack of each pedal. This allows you to turn one pedal on while bypassing the other, using the system as if you were switching between channels of a guitar amp. By using a split Y-configuration 1/8” stereo cable you can link three pedals.

OLED display provides visual confirmation of the sound These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings.

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, BRIGHT switch, MODE switch

POWER SUPPLY * 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the knob and foot rubber)

WEIGHT 350 g/12.35 oz. (Including the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

Taken from https://www.voxamps.co.uk/products/ve-sd on 21 May 2024

Taken from https://www.voxamps.co.uk/products/ve-me on 24 May 2024

Inspired by the Vox AC30’s chime and midrange, the Mystic Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

The Mystic Edge valve distortion pedal offers the chime and midrange of the Vox AC30 in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by the Vox AC30’s chime and midrange, the Mystic Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics. Plus, the OLED display shows an oscilloscope while the pedal is active or bypassed, allowing you to understand exactly how your signal is affected.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path • Iconic sound of the Vox AC30 • Powered by Nutube • Three output modes for use as a pedal or preamp • Selectable analogue cabinet simulator • OLED display with oscilloscope • Active EQ to shape your signal

Taken from https://www.voxamps.co.uk/products/ve-me on 24 May 2024

Inspired by the Vox AC30’s chime and midrange, the Mystic Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

The Mystic Edge valve distortion pedal offers the chime and midrange of the Vox AC30 in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by the Vox AC30’s chime and midrange, the Mystic Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics. Plus, the OLED display shows an oscilloscope while the pedal is active or bypassed, allowing you to understand exactly how your signal is affected.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path
• Iconic sound of the Vox AC30
• Powered by Nutube
• Three output modes for use as a pedal or preamp
• Selectable analogue cabinet simulator
• OLED display with oscilloscope
• Active EQ to shape your signal

Taken from https://www.voxamps.co.uk/products/ve-ce on 21 May 2024

Inspired by the tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. An all-analog signal path and Nutube allows for genuine overdrive and distortion tones with the feel of a real tube amp. Internally boosted voltage gives greater headroom and dynamics.

The Cutting Edge valve distortion pedal offers aggressive saturated and precise modern metal tones in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by the meticulous and tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path
• Tight and precise modern metal tones
• Powered by Nutube
• Three output modes for use as a pedal or preamp
• Selectable analogue cabinet simulator
• OLED display with oscilloscope
• Active EQ to shape your signal

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, TIGHT knob, MODE switch

** POWER SUPPLY* ** 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the knob and foot rubber)

WEIGHT 350 g/12.35 oz. (Including the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

Taken from https://www.voxamps.co.uk/products/ve-ce on 21 May 2024

Inspired by the tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. An all-analog signal path and Nutube allows for genuine overdrive and distortion tones with the feel of a real tube amp. Internally boosted voltage gives greater headroom and dynamics.

The Cutting Edge valve distortion pedal offers aggressive saturated and precise modern metal tones in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by the meticulous and tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path
• Tight and precise modern metal tones
• Powered by Nutube
• Three output modes for use as a pedal or preamp
• Selectable analogue cabinet simulator
• OLED display with oscilloscope
• Active EQ to shape your signal

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, TIGHT knob, MODE switch

POWER SUPPLY * 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the knob and foot rubber)

WEIGHT 350 g/12.35 oz. (Including the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

Taken from https://www.voxamps.co.uk/products/ve-ce on 21 May 2024

Inspired by the tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. An all-analog signal path and Nutube allows for genuine overdrive and distortion tones with the feel of a real tube amp. Internally boosted voltage gives greater headroom and dynamics.

The Cutting Edge valve distortion pedal offers aggressive saturated and precise modern metal tones in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by the meticulous and tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path
• Tight and precise modern metal tones
• Powered by Nutube
• Three output modes for use as a pedal or preamp
• Selectable analogue cabinet simulator
• OLED display with oscilloscope
• Active EQ to shape your signal

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, TIGHT knob, MODE switch

*POWER SUPPLY ** 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the knob and foot rubber)

WEIGHT 350 g/12.35 oz. (Including the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

Taken from https://www.voxamps.co.uk/products/ve-ce on 21 May 2024

Inspired by the tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. An all-analog signal path and Nutube allows for genuine overdrive and distortion tones with the feel of a real tube amp. Internally boosted voltage gives greater headroom and dynamics.

The Cutting Edge valve distortion pedal offers aggressive saturated and precise modern metal tones in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by the meticulous and tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path
• Tight and precise modern metal tones
• Powered by Nutube
• Three output modes for use as a pedal or preamp
• Selectable analogue cabinet simulator
• OLED display with oscilloscope
• Active EQ to shape your signal

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, TIGHT knob, MODE switch

** POWER SUPPLY* ** 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the knob and foot rubber)

WEIGHT 350 g/12.35 oz. (Including the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

Introducing the Vox Cutting Edge: a game-changer in the realm of distortion effects pedals, expertly crafted for the modern musician who craves that aggressive, saturated tone synonymous with contemporary metal. What sets the Vox Cutting Edge apart is not just its ability to deliver those razor-sharp tones but the innovative Nutube technology at its core, offering the warmth and dynamic response of classic tube amps in a sleek pedal format.

This pedal is more than a mere accessory; it's a versatile tool designed to elevate your sound, whether on stage or in the studio. The Vox Cutting Edge transcends the conventional "amp-in-a-box" concept by providing unparalleled flexibility through its all-analog signal path. This ensures authentic overdrive and distortion tones that feel alive, mirroring the responsiveness of a real tube amp. The pedal's internal voltage boost further enhances headroom and dynamics, ensuring your tone stays clear and powerful, regardless of setting.

But the innovation doesn't stop there. The pedal features an OLED display that presents an oscilloscope view of your signal, whether the pedal is active or bypassed, giving you a visual insight into how your sound is being shaped. With three output modes at your disposal, including a line-level preamp and a direct amp-sim with a built-in analog cabinet simulator, the Vox Cutting Edge is as versatile as it is powerful. Whether you're transforming your existing rig with the STANDARD mode, recording directly with PREAMP or CAB-SIM mode, or sculpting your sound with the active EQ, this pedal ensures your tone is always cutting-edge.

Key Features:

• Valve distortion pedal powered by Nutube for authentic, warm tones
• Designed for sharp, modern metal tones with an all-analog signal path
• Three versatile output modes: STANDARD, PREAMP, and CAB-SIM
• Built-in selectable analog cabinet simulator for direct recording
• OLED display featuring an oscilloscope for real-time signal visualization
• Active EQ for precise tone shaping

Taken from https://www.voxamps.co.uk/products/ve-ce on 21 May 2024

Inspired by the tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. An all-analog signal path and Nutube allows for genuine overdrive and distortion tones with the feel of a real tube amp. Internally boosted voltage gives greater headroom and dynamics.

The Cutting Edge valve distortion pedal offers aggressive saturated and precise modern metal tones in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by the meticulous and tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path
• Tight and precise modern metal tones
• Powered by Nutube
• Three output modes for use as a pedal or preamp
• Selectable analogue cabinet simulator
• OLED display with oscilloscope
• Active EQ to shape your signal

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, TIGHT knob, MODE switch

*POWER SUPPLY ** 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the knob and foot rubber)

WEIGHT 350 g/12.35 oz. (Including the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

Dive into the velvety depths of overdrive with the Vox Silk Drive, a standout member of the Valvenergy Series. This pedal combines the warmth of analog with the innovation of Nutube technology to deliver boutique, harmonically rich tones that can grace any genre. Its compact design ensures it fits snugly on any pedalboard, making it a versatile choice for musicians seeking that perfect blend of clarity and distortion. Whether you're laying down tracks in the studio or captivating audiences live, the Vox Silk Drive elevates your sound with its unique character and responsive dynamics.

Key Features:

• Nutube technology for valve-like tone and response
• All-analog signal path for warmth and clarity
• Compact design for easy pedalboard integration
• Versatile overdrive tones suitable for multiple genres

Taken from https://www.voxamps.co.uk/products/ve-sd on 21 May 2024

Inspired by harmonically rich boutique amp tones, the Silk Drive goes beyond the amp-in-a-box category to offer a truly flexible valve overdrive pedal. The all-analogue signal path and Nutube allow for genuine boost and overdrive tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

The Silk Drive valve overdrive pedal offers the dynamic clean and creamy overdrive tones of classic boutique amps in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by harmonically rich boutique amp tones, the Silk Drive goes beyond the amp-in-a-box category to offer a truly flexible valve overdrive pedal. The all-analogue signal path and Nutube allow for genuine boost and overdrive tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics. Plus, the OLED display shows an oscilloscope while the pedal is active or bypassed, allowing you to understand exactly how your signal is affected.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display shows which mode you are currently using.

• Valve overdrive pedal with all-analogue signal path • Harmonically rich boutique overdrive tones • Powered by Nutube • Three output modes for use as a pedal or preamp • Selectable analogue cabinet simulator • OLED display with oscilloscope • Active EQ to shape your signal

What is the Nutube? Nutube is a new vacuum tube that was developed by KORG Corporation in conjunction with Noritake Itron Corporation as an application of vacuum fluorescent display technology. Like a conventional vacuum tube, a Nutube has an anode grid filament structure, and operates as a complete triode tube. It provides the same rich overtones and response that are distinctive of conventional vacuum tubes.

Analogue circuit design with ample headroom The Valvenergy series is made of all analogue circuits with the 9V power supply voltage boosted to 15V internally. This allows for greater volume and headroom, and delivers an even more dynamic sound. It’s a circuit design that fully utilises the potential of the Valvenergy series.

Three connection modes that you can switch according to your situation You can switch modes as appropriate for the way in which you’re using the pedal. STANDARD: The pedal outputs an instrument-level signal. Connect to the input of your guitar amp in the same way as when using a conventional pedal. PREAMP: The pedal outputs a line-level signal. Connect to the return jack of your amp or to the input of your power amp to then use with a guitar cabinet. CAB-SIM: The pedal outputs a line-level signal with an analogue cabinet simulator. Connect to your mixer or DAW for direct guitar tones.

Equipped with a channel switching function You can chain two pedals together with a standard 1/8” stereo cable through the CH-SW (channel switch) jack of each pedal. This allows you to turn one pedal on while bypassing the other, using the system as if you were switching between channels of a guitar amp. By using a split Y-configuration 1/8” stereo cable you can link three pedals.

OLED display provides visual confirmation of the sound These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings.

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, BRIGHT switch, MODE switch

*POWER SUPPLY ** 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the knob and foot rubber)

WEIGHT 350 g/12.35 oz. (Including the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

Unleash the legendary tones of a Vox AC30 with the Vox Mystic Edge pedal. This compact marvel brings the cherished, chimey overdrive and rich distortion right to your pedalboard. Thanks to its innovative Nutube technology, it offers genuine valve-driven sound in a modern, easy-to-integrate format. Perfect for the musician who craves that classic British rock sound without the bulk and expense of vintage gear, the Mystic Edge stands out as a must-have for guitarists seeking authentic, analog overtones and dynamic response.

Key Features:

• Incorporates Vox's cutting-edge Nutube technology for authentic valve tones
• Delivers the iconic, chimey overdrive and rich distortion of the classic AC30
• Compact, pedalboard-friendly design
• All-analog signal path for pure, unadulterated sound
• Ideal for achieving classic British rock tones

Taken from https://www.voxamps.co.uk/products/ve-me on 24 May 2024

Inspired by the Vox AC30’s chime and midrange, the Mystic Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics.

The Mystic Edge valve distortion pedal offers the chime and midrange of the Vox AC30 in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by the Vox AC30’s chime and midrange, the Mystic Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analogue signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics. Plus, the OLED display shows an oscilloscope while the pedal is active or bypassed, allowing you to understand exactly how your signal is affected.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path • Iconic sound of the Vox AC30 • Powered by Nutube • Three output modes for use as a pedal or preamp • Selectable analogue cabinet simulator • OLED display with oscilloscope • Active EQ to shape your signal

Dive into the realm of iconic British amp tones with the Vox Copperhead Drive, a standout member of Vox's Valvenergy Series. This pedal is not just another overdrive—it's a journey back in time, powered by the revolutionary Nutube technology. Experience the warmth and dynamic response of classic tube amps, combined with modern clarity and versatility. The Copperhead Drive is your ticket to achieving that coveted crunch, without the bulk and expense of vintage gear. Whether you're pushing your clean amp into new territories or adding some extra grit to your already overdriven sound, this pedal delivers with precision and character. It's not just an effect; it's an extension of your musical expression.

Key Features:

• Utilizes Nutube technology for authentic tube amp tones
• Delivers classic British amp crunch with modern clarity
• Versatile overdrive suitable for a variety of musical styles
• True bypass for uncolored signal when the pedal is disengaged

Taken from https://www.voxamps.co.uk/products/ve-cd on 21 May 2024

VE-CD Valve distortion pedal with an all-analog signal path brings iconic amp sounds for your pedalboard. This Copperhead valve distortion pedal recreates a classic full stack amp tone, used for the powerful sound of rock in the 80s. Can be used for overdriven tones or thick distortion. Three output modes - standard pedal, a line-level preamp, and a direct amp-sim.

The Copperhead valve distortion pedal recreates the classic full stack amp tone, used for the powerful sound of hard rock in the 80s. Use it for lightly overdriven tones or thick distortion.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.

• Valve distortion pedal with all-analogue signal path • Tight and precise modern rock tones • Powered by Nutube • Three output modes for use as a pedal or preamp • Selectable analogue cabinet simulator • OLED display with oscilloscope • Active EQ to shape your signal

INPUTS/OUTPUTS INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, BRIGHT switch, MODE switch

*POWER SUPPLY ** 1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION 95 mA

BATTERY LIFE Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H) 72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the switch and foot rubber)

WEIGHT 350 g/12.35 oz. (Excluding the battery)

INCLUDED ITEM 1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY) AC adaptor

Description from https://vintageguitarsrus.com/products/vintage-v100-reissued-electric-guitar-lemon-drop on 21 May 2024

The Vintage ReIssued Series V100PGM is a one-of-a-kind classic. A reverse fitted neck pickup combines with out-of-phase centre position wiring to produce a throaty, singing and instantly-identifiable lead tone, ideal for slow blues.

Mismatched tone and volume knobs and a flawless finish ensure the Lemon Drop keeps the mojo working.

Whether you're searching for your first guitar or your last, every member of the Vintage ReIssued Series is a keeper. Play on.

V100PGM Features:

Body: Two piece centre jointed mahogany body, with carved solid maple cap and bookmatched flame maple veneer provides resonance, tone and ‘correct weight’ comfort. The Vintage V100 features a unique, evolutionary body shape, with a graceful descending bass side shoulder and an ingeniously-designed offset heel providing improved access to the upper reaches of the fretboard.

Bridge: Wilkinson T.O.M. enables fine-tuning of each string for superb intonation all over the fretboard.

Pickups: Pair of Wilkinson WVC Double Coils with nickel covers mix traditional appearance with contemporary punch and power. Neck pickup is reverse fitted for unique singing tones.

Controls: Twin master Volume and Tone controls with three-way pickup selector switch, centre position wired out of phase.

Machine heads: Grover® tulip machine heads provide simple, effective action for maximum tuning stability.

Neck: One piece Mahogany with classic Vintage ‘soft C’ profile for instant comfort, speed, accuracy and great feel.

Fingerboard: Rosewood for outstanding tonal transfer, responsiveness and durability with a traditional 12" radius for superb playability and feel.

Scale Length: 24.75" / 628mm.

Frets: 22 Medium Jumbo profile frets add to comfort, accuracy and overall positive feel of the Vintage V100.

Nut: 43mm Graphtech NuBone for smooth and friction-free string bending and tuning.

Headstock: Classic Vintage headstock design for balance and visual appeal.

The V100™ 'Lemon Drop™' is an original Vintage® ReIssued Series guitar designed in the UK by the Vintage® design team.

MARSHALL™ MOJO IN A BOX Heavily inspired by the tone and feel of the following legendary Marshall™ amps: the non master volume series PLEXI™ Super Lead (1959/1987) & Super Bass (1992) and the master volume series JMP™ & JCM800™ (2203/2204).

Over the years, we have had many different types of Marshall™ amps on our workbench, some for repairs and others for customization. Being huge fans of the sound of these classic amplifiers, that still continues to excite us through the music of so many artists, we decided to try and capture its mojo – the true essence of the soul of this sound – and carefully place it in a little box. Thus the Room #40 was born! Using jfet technology, we tried to stay loyal to the tone and feel of the following legendary Marshall™ amps: the non master volume series PLEXI™ Super Lead (1959/1987) & Super Bass (1992) and the master volume series JMP™ & JCM800™ (2203/2204). We emphasized on emulating the compression and sag coming from the power amp section, when these amps are pushed to the edge, while at the same time giving access to two famous mods, mod #39 (PLEXI™) and mod #34 (JMP™ & JCM800™). Of course the manifestation of our love for the late great Eddie Van Halen, who created the so called “brown sound” using an ohmite variac (variable transformer used to lower or raise the voltage going into the amplifier), could not be absent from this endeavor. Finally, we incorporated the Presence control to make the sound adjustable to any circumstance, regardless of whether you are plugged into the front of an amp that may or may not have a bright cap or even straight to a power amp.

Specs

• Handmade in Athens, Greece • True Bypass • 2 types of Marshall™ circuits PLEXI™ (19)/ JMP™ & JCM800 (22) • Variac voltage control from 7.5V to 21V • Classic Marshall™ 3 band EQ • Versatile Presence control for matching pedal to darker or brighter amps • Gain Boost controlled by a foot-switch and a dedicated trimmer • Power supply : 9V Boss-type DC adapter (center -). Using 10V or more may cause severe damage to the pedal and void warranty Max power consumption : 30mA @ 9V DC • Heavy duty & light weight aluminum box. 73mm(Width) x 123mm(Length) x 55mm(Height) • T.A.W. Limited Life-Time warranty

From page 3 of DRP-1 manual:

The Marshall Direct Recording Pre-Amp is in essence a complete Marshall stack in miniature, despite it’s compact size the DRP-1 uses micro electronic techniques to emulate the tone and feel of a typical Marshall pre-amp, power amp and loudspeaker cabinet. This allows the recording and reproducing of great guitar sounds with the minimum of fuss and without the need to set-up and mic your normal guitar amp rig.

The benefits of the DRP-1 can be utilised beyond the realms of the home studio. For instance the built-in stereo headphone amplifier can be coupled to your favourite effects processor to give your personal practice routines the realism of your stage sound. Alternatively, use the DRP-1 plugged into the front end of your normal guitar amp to fully ‘Marshallize’ it.

Another use of the DRP-1 is to go direct into the PA from the emulated line-out. This is especially handy for rehearsal, where instead of transporting your main system along, you can turn up with the DRP-1 and just plug in and play. In addition to the guitar uses, the Direct Recording Pre-Amp can be used to add warmth and another dimension to keyboards, especially when mixed with the original sound.

From page 3 of DRP-1 manual:

The Marshall Direct Recording Pre-Amp is in essence a complete Marshall stack in miniature, despite it’s compact size the DRP-1 uses micro electronic techniques to emulate the tone and feel of a typical Marshall pre-amp, power amp and loudspeaker cabinet. This allows the recording and reproducing of great guitar sounds with the minimum of fuss and without the need to set-up and mic your normal guitar amp rig.

The benefits of the DRP-1 can be utilised beyond the realms of the home studio. For instance the built-in stereo headphone amplifier can be coupled to your favourite effects processor to give your personal practice routines the realism of your stage sound. Alternatively, use the DRP-1 plugged into the front end of your normal guitar amp to fully ‘Marshallize’ it.

Another use of the DRP-1 is to go direct into the PA from the emulated line-out. This is especially handy for rehearsal, where instead of transporting your main system along, you can turn up with the DRP-1 and just plug in and play. In addition to the guitar uses, the Direct Recording Pre-Amp can be used to add warmth and another dimension to keyboards, especially when mixed with the original sound.

From page 3 of DRP-1 manual:

The Marshall Direct Recording Pre-Amp is in essence a complete Marshall stack in miniature, despite it’s compact size the DRP-1 uses micro electronic techniques to emulate the tone and feel of a typical Marshall pre-amp, power amp and loudspeaker cabinet. This allows the recording and reproducing of great guitar sounds with the minimum of fuss and without the need to set-up and mic your normal guitar amp rig.<

The benefits of the DRP-1 can be utilised beyond the realms of the home studio. For instance the built-in stereo headphone amplifier can be coupled to your favourite effects processor to give your personal practice routines the realism of your stage sound. Alternatively, use the DRP-1 plugged into the front end of your normal guitar amp to fully ‘Marshallize’ it.<

Another use of the DRP-1 is to go direct into the PA from the emulated line-out. This is especially handy for rehearsal, where instead of transporting your main system along, you can turn up with the DRP-1 and just plug in and play. In addition to the guitar uses, the Direct Recording Pre-Amp can be used to add warmth and another dimension to keyboards, especially when mixed with the original sound.<

From page 3 of DRP-1 manual:

The Marshall Direct Recording Pre-Amp is in essence a complete Marshall stack in miniature, despite it’s compact size the DRP-1 uses micro electronic techniques to emulate the tone and feel of a typical Marshall pre-amp, power amp and loudspeaker cabinet. This allows the recording and reproducing of great guitar sounds with the minimum of fuss and without the need to set-up and mic your normal guitar amp rig.

The benefits of the DRP-1 can be utilised beyond the realms of the home studio. For instance the built-in stereo headphone amplifier can be coupled to your favourite effects processor to give your personal practice routines the realism of your stage sound. Alternatively, use the DRP-1 plugged into the front end of your normal guitar amp to fully ‘Marshallize’ it.

Another use of the DRP-1 is to go direct into the PA from the emulated line-out. This is especially handy for rehearsal, where instead of transporting your main system along, you can turn up with the DRP-1 and just plug in and play. In addition to the guitar uses, the Direct Recording Pre-Amp can be used to add warmth and another dimension to keyboards, especially when mixed with the original sound.

From page 3 of DRP-1 manual:

The Marshall Direct Recording Pre-Amp is in essence a complete Marshall stack in miniature, despite it’s compact size the DRP-1 uses micro electronic techniques to emulate the tone and feel of a typical Marshall pre-amp, power amp and loudspeaker cabinet. This allows the recording and reproducing of great guitar sounds with the minimum of fuss and without the need to set-up and mic your normal guitar amp rig.

The benefits of the DRP-1 can be utilised beyond the realms of the home studio. For instance the built-in stereo headphone amplifier can be coupled to your favourite effects processor to give your personal practice routines the realism of your stage sound. Alternatively, use the DRP-1 plugged into the front end of your normal guitar amp to fully ‘Marshallize’ it.

Another use of the DRP-1 is to go direct into the PA from the emulated line-out. This is especially handy for rehearsal, where instead of transporting your main system along, you can turn up with the DRP-1 and just plug in and play. In addition to the guitar uses, the Direct Recording Pre-Amp can be used to add warmth and another dimension to keyboards, especially when mixed with the original sound.

From page 3 of DRP-1 manual:

The Marshall Direct Recording Pre-Amp is in essence a complete Marshall stack in miniature, despite it’s compact size the DRP-1 uses micro electronic techniques to emulate the tone and feel of a typical Marshall pre-amp, power amp and loudspeaker cabinet. This allows the recording and reproducing of great guitar sounds with the minimum of fuss and without the need to set-up and mic your normal guitar amp rig.<

The benefits of the DRP-1 can be utilised beyond the realms of the home studio. For instance the built-in stereo headphone amplifier can be coupled to your favourite effects processor to give your personal practice routines the realism of your stage sound. Alternatively, use the DRP-1 plugged into the front end of your normal guitar amp to fully ‘Marshallize’ it.<

Another use of the DRP-1 is to go direct into the PA from the emulated line-out. This is especially handy for rehearsal, where instead of transporting your main system along, you can turn up with the DRP-1 and just plug in and play. In addition to the guitar uses, the Direct Recording Pre-Amp can be used to add warmth and another dimension to keyboards, especially when mixed with the original sound.<

From page 3 of DRP-1 manual:

The Marshall Direct Recording Pre-Amp is in essence a complete Marshall stack in miniature, despite it’s compact size the DRP-1 uses micro electronic techniques to emulate the tone and feel of a typical Marshall pre-amp, power amp and loudspeaker cabinet. This allows the recording and reproducing of great guitar sounds with the minimum of fuss and without the need to set-up and mic your normal guitar amp rig.

The benefits of the DRP-1 can be utilised beyond the realms of the home studio. For instance the built-in stereo headphone amplifier can be coupled to your favourite effects processor to give your personal practice routines the realism of your stage sound. Alternatively, use the DRP-1 plugged into the front end of your normal guitar amp to fully ‘Marshallize’ it.

Another use of the DRP-1 is to go direct into the PA from the emulated line-out. This is especially handy for rehearsal, where instead of transporting your main system along, you can turn up with the DRP-1 and just plug in and play. In addition to the guitar uses, the Direct Recording Pre-Amp can be used to add warmth and another dimension to keyboards, especially when mixed with the original sound.