Ethan Torchio

This is his main kit in Maneskin. This is used in performances such as Eurovision 2021. Sizes: 24×14 Bass Drum, 13x9 Rack Tom, 16×16 Floor Tom

Listed in his gear set up in this article. He uses a 14x6.5 Black Beauty snare drum as his main snare.

In their clip I wanna be your slave, around 0:30 we can see it's a written omni on the cymbal. i conclude it's the sabian omni hhx since we can also read hhx at 2:58 in this video: https://www.youtube.com/watch?v=ssDtj1uL1Go

at 0:32 we can see a he's using a remo with powerstroke 3 on his tom

in this video at 0:44 (you gonna need quick eyes) we can see a sm57 above the snare

Used for the hi-hat and ride cymbal on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

Used for overheads on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

Used for ambience on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

Metropolis' equipment list specifies two Neumann U87 Ai and one U87 P48.

Used for the toms on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

Used for the bass drum and snare drum on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

Used for the drum tracks on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

Used for the snare bottom on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

Used for the bass drum on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

Used for the bass drum on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

Used for the bass drum on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

Used for the drum tracks on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

Used for the drum tracks on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

The Metropolis gear list specifies the "Avid Pro Tools HDX|1 with Pro Tools Ultimate 2021".

Used for the drum tracks on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

Working from memory, old gear lists and photos, and the track names in his mix session for ‘Beggin’, Marcantoni retraces his steps, both for the recordings and the mixing. “For the kick I would have used a Shure Beta 52A on the inside, a Neumann U47 [FET] on the outside, and a Royer Labs R‑122 placed close to the kick drum pointing to the snare, for a mono drum kit track. On the snare I used a Shure SM57 at the top, and a Shure Beta 57 at the bottom. I duplicated the top snare track to create another effect setting for the rimshots.

“In addition I had one Neumann KM‑184 for hi‑hat and another KM‑184 for the ride cymbal, a couple of AKG C414 XLII mics as overheads, and two Neumann U87s for ambience. The toms had Beyerdynamic Opus 87 mics. I would have avoided the Yamaha desk for the recording chains, so the mics would have gone through external mic pres. I most likely would have used API 512C’s for the kick and the snare, and Focusrite ISA 828/430 for the other drum tracks. They would have gone into the Apogee Symphony MkI, and the Avid HD I/O.

The article includes this photo from "Metropolis Studio in 2017, where Måneskin recorded ‘Beggin’." It shows a MKI.

Used for the drum tracks on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

“The main sonic treatment on the drums came from the aux effects tracks: the Drums Ambient, which had a UAD EMT140 for some plate reverb with a small decay and some predelay, and the Drums Amp, with the SansAmp for parallel distortion. All drums go through the MF Drums group track, which has the UAD SSL G‑channel and Avid EQ3 7‑band, for some compression and minor EQ adjustments.

Used for the drum tracks on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

“The main sonic treatment on the drums came from the aux effects tracks: the Drums Ambient, which had a UAD EMT140 for some plate reverb with a small decay and some predelay, and the Drums Amp, with the SansAmp for parallel distortion. All drums go through the MF Drums group track, which has the UAD SSL G‑channel and Avid EQ3 7‑band, for some compression and minor EQ adjustments.

Used for the drum tracks on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

“The main sonic treatment on the drums came from the aux effects tracks: the Drums Ambient, which had a UAD EMT140 for some plate reverb with a small decay and some predelay, and the Drums Amp, with the SansAmp for parallel distortion. All drums go through the MF Drums group track, which has the UAD SSL G‑channel and Avid EQ3 7‑band, for some compression and minor EQ adjustments.

Used for the drum tracks on "Beggin", as described by Alessandro Marcantoni in this October 2021 Sound on Sound interview.

“The main sonic treatment on the drums came from the aux effects tracks: the Drums Ambient, which had a UAD EMT140 for some plate reverb with a small decay and some predelay, and the Drums Amp, with the SansAmp for parallel distortion. All drums go through the MF Drums group track, which has the UAD SSL G‑channel and Avid EQ3 7‑band, for some compression and minor EQ adjustments.

In the video titled "Måneskin 'In Nome del Padre' Tokyo, Japan Dec. 2023" on YouTube, at timestamp 0:43, Ethan Torchio can be clearly seen using a Sabian 18" HHX Legacy Crash Cymbal. This observation is supported by the visual evidence provided by The Loneliest Channel.

At the 1:06 mark in the video "Måneskin 'In Nome del Padre' Tokyo, Japan Dec. 2023" by The Loneliest Channel on YouTube, you can discern that Ethan Torchio uses Sabian HHX Complex Hi Hats.

In a Pinterest post, drummer Ethan Torchio is seen holding Vic Firth 5B drumsticks, confirming his use of this specific gear.

In an interview with Modern Drummer Official, Ethan Torchio discusses his use of the Ludwig 4 piece Legacy Mahogany Pro Beat Shell Pack in , it is a custom-made kit in terms of lugs and sizes.

In the video titled "Ethan Torchio - Måneskin - Tour Kit Rundown" by Modern Drummer Official, Ethan Torchio is clearly seen using the Sabian AAX Stage Crash 16" cymbal at the 4:32 mark.

In the video titled "Ethan Torchio - Måneskin - Tour Kit Rundown" by Modern Drummer Official, Ethan Torchio's use of the Sabian 22" HHX Legacy Heavy Ride is confirmed as the cymbal is visibly identifiable at the 4:45 mark during the demonstration of his drum setup for the Loud Kids Tour 2022.

In the YouTube video "Ethan Torchio - Måneskin - Tour Kit Rundown" by Modern Drummer Official, Ethan Torchio is shown using a Ludwig Black Beauty Snare Drum 14''x6.5'' as part of his drum kit at the 0:30 mark.

In the video titled "Ethan Torchio - Måneskin - Tour Kit Rundown" by Modern Drummer Official, at 4:29, Ethan Torchio identifies the cymbal on his left as a Sabian AAX Crash Cymbal during a detailed overview of his drum kit.