Guy Berryman

Mentioned by mixing engineer Michael Brauer as being used on "Violet Hill" in this Sound on Sound interview about the production of Viva la Vida & Death and All of His Friends.

Bass: EAR 660, Altec 436B, Dbx 160, Akai S612, Moog MKPE

"The bass was interesting. I had the same bass track coming back on two channels, and on one of them I had the EAR 660 compressor, going into an Altec 436B compressor, going into my Moog MKPE three–band parametric EQ, all going via the inserts. That channel was for the low end, giving the sound its fullness. On the other channel I had a Dbx 160, crushing heavily, with the bottom end taken out. That gave the bass its punch and mid-range. I also sent the basses to an Akai S612 sampler. A friend of mine turned me on to doing this. I don't use it as a sampler, but as a distortion device. If you put the Akai in microphone mode and you overload it, you get really nice warm distortion that you don't really notice, but it sounds good. If I want something more vicious than the Akai, I'll use the [Thermionic Culture] Culture Vulture instead, which I feel is one of the best pieces of equipment for adding some attitude. It's great for when tracks are recorded too cleanly. Finally the basses, like the drums, went through Bus B in my multi–bus compression setup, which consists of Distressors going into my Avalon E55 EQ."

Mentioned by mixing engineer Michael Brauer as being used on "Violet Hill" in this Sound on Sound interview about the production of Viva la Vida & Death and All of His Friends.

Bass: EAR 660, Altec 436B, Dbx 160, Akai S612, Moog MKPE

"The bass was interesting. I had the same bass track coming back on two channels, and on one of them I had the EAR 660 compressor, going into an Altec 436B compressor, going into my Moog MKPE three–band parametric EQ, all going via the inserts. That channel was for the low end, giving the sound its fullness. On the other channel I had a Dbx 160, crushing heavily, with the bottom end taken out. That gave the bass its punch and mid-range. I also sent the basses to an Akai S612 sampler. A friend of mine turned me on to doing this. I don't use it as a sampler, but as a distortion device. If you put the Akai in microphone mode and you overload it, you get really nice warm distortion that you don't really notice, but it sounds good. If I want something more vicious than the Akai, I'll use the [Thermionic Culture] Culture Vulture instead, which I feel is one of the best pieces of equipment for adding some attitude. It's great for when tracks are recorded too cleanly. Finally the basses, like the drums, went through Bus B in my multi–bus compression setup, which consists of Distressors going into my Avalon E55 EQ."

At 11:06 in this video, Guy Berryman can be seen using an Apple, MacBook Pro.

Chris Martin says Guy Berryman programs the band's synths and the Tempest is shown beside the computer throughout this video

Mentioned by mixing engineer Michael Brauer as being used on "Violet Hill" in this Sound on Sound interview about the production of Viva la Vida & Death and All of His Friends.

Bass: EAR 660, Altec 436B, Dbx 160, Akai S612, Moog MKPE

"The bass was interesting. I had the same bass track coming back on two channels, and on one of them I had the EAR 660 compressor, going into an Altec 436B compressor, going into my Moog MKPE three–band parametric EQ, all going via the inserts. That channel was for the low end, giving the sound its fullness. On the other channel I had a Dbx 160, crushing heavily, with the bottom end taken out. That gave the bass its punch and mid-range. I also sent the basses to an Akai S612 sampler. A friend of mine turned me on to doing this. I don't use it as a sampler, but as a distortion device. If you put the Akai in microphone mode and you overload it, you get really nice warm distortion that you don't really notice, but it sounds good. If I want something more vicious than the Akai, I'll use the [Thermionic Culture] Culture Vulture instead, which I feel is one of the best pieces of equipment for adding some attitude. It's great for when tracks are recorded too cleanly. Finally the basses, like the drums, went through Bus B in my multi–bus compression setup, which consists of Distressors going into my Avalon E55 EQ."

Mentioned by mixing engineer Michael Brauer as being used on "Violet Hill" in this Sound on Sound interview about the production of Viva la Vida & Death and All of His Friends.

Bass: EAR 660, Altec 436B, Dbx 160, Akai S612, Moog MKPE

"The bass was interesting. I had the same bass track coming back on two channels, and on one of them I had the EAR 660 compressor, going into an Altec 436B compressor, going into my Moog MKPE three–band parametric EQ, all going via the inserts. That channel was for the low end, giving the sound its fullness. On the other channel I had a Dbx 160, crushing heavily, with the bottom end taken out. That gave the bass its punch and mid-range. I also sent the basses to an Akai S612 sampler. A friend of mine turned me on to doing this. I don't use it as a sampler, but as a distortion device. If you put the Akai in microphone mode and you overload it, you get really nice warm distortion that you don't really notice, but it sounds good. If I want something more vicious than the Akai, I'll use the [Thermionic Culture] Culture Vulture instead, which I feel is one of the best pieces of equipment for adding some attitude. It's great for when tracks are recorded too cleanly. Finally the basses, like the drums, went through Bus B in my multi–bus compression setup, which consists of Distressors going into my Avalon E55 EQ."

Mentioned by mixing engineer Michael Brauer as being used on "Violet Hill" in this Sound on Sound interview about the production of Viva la Vida & Death and All of His Friends.

Bass: EAR 660, Altec 436B, Dbx 160, Akai S612, Moog MKPE

"The bass was interesting. I had the same bass track coming back on two channels, and on one of them I had the EAR 660 compressor, going into an Altec 436B compressor, going into my Moog MKPE three–band parametric EQ, all going via the inserts. That channel was for the low end, giving the sound its fullness. On the other channel I had a Dbx 160, crushing heavily, with the bottom end taken out. That gave the bass its punch and mid-range. I also sent the basses to an Akai S612 sampler. A friend of mine turned me on to doing this. I don't use it as a sampler, but as a distortion device. If you put the Akai in microphone mode and you overload it, you get really nice warm distortion that you don't really notice, but it sounds good. If I want something more vicious than the Akai, I'll use the [Thermionic Culture] Culture Vulture instead, which I feel is one of the best pieces of equipment for adding some attitude. It's great for when tracks are recorded too cleanly. Finally the basses, like the drums, went through Bus B in my multi–bus compression setup, which consists of Distressors going into my Avalon E55 EQ."

Mentioned by mixing engineer Michael Brauer as being used on "Violet Hill" in this Sound on Sound interview about the production of Viva la Vida & Death and All of His Friends.

Bass: EAR 660, Altec 436B, Dbx 160, Akai S612, Moog MKPE

"The bass was interesting. I had the same bass track coming back on two channels, and on one of them I had the EAR 660 compressor, going into an Altec 436B compressor, going into my Moog MKPE three–band parametric EQ, all going via the inserts. That channel was for the low end, giving the sound its fullness. On the other channel I had a Dbx 160, crushing heavily, with the bottom end taken out. That gave the bass its punch and mid-range. I also sent the basses to an Akai S612 sampler. A friend of mine turned me on to doing this. I don't use it as a sampler, but as a distortion device. If you put the Akai in microphone mode and you overload it, you get really nice warm distortion that you don't really notice, but it sounds good. If I want something more vicious than the Akai, I'll use the [Thermionic Culture] Culture Vulture instead, which I feel is one of the best pieces of equipment for adding some attitude. It's great for when tracks are recorded too cleanly. Finally the basses, like the drums, went through Bus B in my multi–bus compression setup, which consists of Distressors going into my Avalon E55 EQ."

Mentioned by mixing engineer Michael Brauer as being used on "Violet Hill" in this Sound on Sound interview about the production of Viva la Vida & Death and All of His Friends. It is visible in this photo from the same interview.

Bass: EAR 660, Altec 436B, Dbx 160, Akai S612, Moog MKPE

"The bass was interesting. I had the same bass track coming back on two channels, and on one of them I had the EAR 660 compressor, going into an Altec 436B compressor, going into my Moog MKPE three–band parametric EQ, all going via the inserts. That channel was for the low end, giving the sound its fullness. On the other channel I had a Dbx 160, crushing heavily, with the bottom end taken out. That gave the bass its punch and mid-range. I also sent the basses to an Akai S612 sampler. A friend of mine turned me on to doing this. I don't use it as a sampler, but as a distortion device. If you put the Akai in microphone mode and you overload it, you get really nice warm distortion that you don't really notice, but it sounds good. If I want something more vicious than the Akai, I'll use the [Thermionic Culture] Culture Vulture instead, which I feel is one of the best pieces of equipment for adding some attitude. It's great for when tracks are recorded too cleanly. Finally the basses, like the drums, went through Bus B in my multi–bus compression setup, which consists of Distressors going into my Avalon E55 EQ."

Mentioned by mixing engineer Michael Brauer as being used on "Violet Hill" in this Sound on Sound interview about the production of Viva la Vida & Death and All of His Friends. It is visible in this photo from the same interview.

Bass: EAR 660, Altec 436B, Dbx 160, Akai S612, Moog MKPE

"The bass was interesting. I had the same bass track coming back on two channels, and on one of them I had the EAR 660 compressor, going into an Altec 436B compressor, going into my Moog MKPE three–band parametric EQ, all going via the inserts. That channel was for the low end, giving the sound its fullness. On the other channel I had a Dbx 160, crushing heavily, with the bottom end taken out. That gave the bass its punch and mid-range. I also sent the basses to an Akai S612 sampler. A friend of mine turned me on to doing this. I don't use it as a sampler, but as a distortion device. If you put the Akai in microphone mode and you overload it, you get really nice warm distortion that you don't really notice, but it sounds good. If I want something more vicious than the Akai, I'll use the [Thermionic Culture] Culture Vulture instead, which I feel is one of the best pieces of equipment for adding some attitude. It's great for when tracks are recorded too cleanly. Finally the basses, like the drums, went through Bus B in my multi–bus compression setup, which consists of Distressors going into my Avalon E55 EQ."

In this interview with GearJunkies.com, Guy discusses his love for and home studio usage of Chandler Limited units, mentioning the TG12413 Zener Limiter specifically.

In this interview with GearJunkies.com, Guy discusses his love for and home studio usage of Chandler Limited units, mentioning the TG Series Mini Rack Mixer specifically.

In this post by the Instagram account of Embodme, the maker shows that Guy, along with the rest of Coldplay, played the instrument during their Music of the Spheres World tour