Kylie Minogue

Used on Minogue's vocals for "Dancing", as stated by producer Sky Adams in this July 2018 Sound on Sound interview.

"My vocal chain on the Kylie bus begins with a Logic Channel EQ, with a high?pass at 69Hz; I also boost 285Hz and 3100Hz. Next is the Waves CLA Vocals, with which I again boost some high end and add some compression, and a tiny bit of reverb; altogether it enhances the vocals a bit. The third plug?in is the Waves Butch Vig Vocals, with the de?esser and compressor both at 50 percent and adding some presence and air, all to give it some sharpness. For some reason Butch Vig gives a nice saturation and clarity on vocals, but I find that it only works on the Aston microphone. With every other mic I’ve used it tends to sound too distorted.

“The next plug?in is a Waves dbx 160 for some more compression, then the Waves SSL G?master bus compressor, set to a ratio of 2, attack 1 and release 3, and the Waves C4 multiband set to the Pensado preset, adding above 8kHz, the Waves API 560 EQ adding yet more high end, and the Waves RVox, with the compressor set to 4.2. I find that the RVox really helps to bring the vocal to the front.

“My main reverb in this session, which I used mostly on the vocals, and my favourite reverb in general, is the Toraverb. It’s really hard to find a good reverb, but I freaking love it, and I use it on almost everything. It has a wonderful tail off, and also a delay that works really well. ‘Crystal Cave’ is a favourite preset, which I use mainly on vocals. I don’t mind using the same reverb on everything, but in addition I sometimes use Logic’s Space Designer, which also has a great sound, and a wonderful tail that you can crank all the way up. The latest update, the Chronoverb, is amazing.”

Used on Minogue's vocals for "Dancing", as stated by producer Sky Adams in this July 2018 Sound on Sound interview. An image of the settings can be found here.

"My vocal chain on the Kylie bus begins with a Logic Channel EQ, with a high?pass at 69Hz; I also boost 285Hz and 3100Hz. Next is the Waves CLA Vocals, with which I again boost some high end and add some compression, and a tiny bit of reverb; altogether it enhances the vocals a bit. The third plug?in is the Waves Butch Vig Vocals, with the de?esser and compressor both at 50 percent and adding some presence and air, all to give it some sharpness. For some reason Butch Vig gives a nice saturation and clarity on vocals, but I find that it only works on the Aston microphone. With every other mic I’ve used it tends to sound too distorted.

“The next plug?in is a Waves dbx 160 for some more compression, then the Waves SSL G?master bus compressor, set to a ratio of 2, attack 1 and release 3, and the Waves C4 multiband set to the Pensado preset, adding above 8kHz, the Waves API 560 EQ adding yet more high end, and the Waves RVox, with the compressor set to 4.2. I find that the RVox really helps to bring the vocal to the front.

“My main reverb in this session, which I used mostly on the vocals, and my favourite reverb in general, is the Toraverb. It’s really hard to find a good reverb, but I freaking love it, and I use it on almost everything. It has a wonderful tail off, and also a delay that works really well. ‘Crystal Cave’ is a favourite preset, which I use mainly on vocals. I don’t mind using the same reverb on everything, but in addition I sometimes use Logic’s Space Designer, which also has a great sound, and a wonderful tail that you can crank all the way up. The latest update, the Chronoverb, is amazing.”

Used on Minogue's vocals for "Dancing", as stated by producer Sky Adams in this July 2018 Sound on Sound interview. An image of the settings can be found here.

"My vocal chain on the Kylie bus begins with a Logic Channel EQ, with a high?pass at 69Hz; I also boost 285Hz and 3100Hz. Next is the Waves CLA Vocals, with which I again boost some high end and add some compression, and a tiny bit of reverb; altogether it enhances the vocals a bit. The third plug?in is the Waves Butch Vig Vocals, with the de?esser and compressor both at 50 percent and adding some presence and air, all to give it some sharpness. For some reason Butch Vig gives a nice saturation and clarity on vocals, but I find that it only works on the Aston microphone. With every other mic I’ve used it tends to sound too distorted.

“The next plug?in is a Waves dbx 160 for some more compression, then the Waves SSL G?master bus compressor, set to a ratio of 2, attack 1 and release 3, and the Waves C4 multiband set to the Pensado preset, adding above 8kHz, the Waves API 560 EQ adding yet more high end, and the Waves RVox, with the compressor set to 4.2. I find that the RVox really helps to bring the vocal to the front.

“My main reverb in this session, which I used mostly on the vocals, and my favourite reverb in general, is the Toraverb. It’s really hard to find a good reverb, but I freaking love it, and I use it on almost everything. It has a wonderful tail off, and also a delay that works really well. ‘Crystal Cave’ is a favourite preset, which I use mainly on vocals. I don’t mind using the same reverb on everything, but in addition I sometimes use Logic’s Space Designer, which also has a great sound, and a wonderful tail that you can crank all the way up. The latest update, the Chronoverb, is amazing.”

Used on Minogue's vocals for "Dancing", as stated by producer Sky Adams in this July 2018 Sound on Sound interview.

"My vocal chain on the Kylie bus begins with a Logic Channel EQ, with a high?pass at 69Hz; I also boost 285Hz and 3100Hz. Next is the Waves CLA Vocals, with which I again boost some high end and add some compression, and a tiny bit of reverb; altogether it enhances the vocals a bit. The third plug?in is the Waves Butch Vig Vocals, with the de?esser and compressor both at 50 percent and adding some presence and air, all to give it some sharpness. For some reason Butch Vig gives a nice saturation and clarity on vocals, but I find that it only works on the Aston microphone. With every other mic I’ve used it tends to sound too distorted.

“The next plug?in is a Waves dbx 160 for some more compression, then the Waves SSL G?master bus compressor, set to a ratio of 2, attack 1 and release 3, and the Waves C4 multiband set to the Pensado preset, adding above 8kHz, the Waves API 560 EQ adding yet more high end, and the Waves RVox, with the compressor set to 4.2. I find that the RVox really helps to bring the vocal to the front.

“My main reverb in this session, which I used mostly on the vocals, and my favourite reverb in general, is the Toraverb. It’s really hard to find a good reverb, but I freaking love it, and I use it on almost everything. It has a wonderful tail off, and also a delay that works really well. ‘Crystal Cave’ is a favourite preset, which I use mainly on vocals. I don’t mind using the same reverb on everything, but in addition I sometimes use Logic’s Space Designer, which also has a great sound, and a wonderful tail that you can crank all the way up. The latest update, the Chronoverb, is amazing.”

Used on Minogue's vocals for "Dancing", as stated by producer Sky Adams in this July 2018 Sound on Sound interview.

"My vocal chain on the Kylie bus begins with a Logic Channel EQ, with a high?pass at 69Hz; I also boost 285Hz and 3100Hz. Next is the Waves CLA Vocals, with which I again boost some high end and add some compression, and a tiny bit of reverb; altogether it enhances the vocals a bit. The third plug?in is the Waves Butch Vig Vocals, with the de?esser and compressor both at 50 percent and adding some presence and air, all to give it some sharpness. For some reason Butch Vig gives a nice saturation and clarity on vocals, but I find that it only works on the Aston microphone. With every other mic I’ve used it tends to sound too distorted.

“The next plug?in is a Waves dbx 160 for some more compression, then the Waves SSL G?master bus compressor, set to a ratio of 2, attack 1 and release 3, and the Waves C4 multiband set to the Pensado preset, adding above 8kHz, the Waves API 560 EQ adding yet more high end, and the Waves RVox, with the compressor set to 4.2. I find that the RVox really helps to bring the vocal to the front.

“My main reverb in this session, which I used mostly on the vocals, and my favourite reverb in general, is the Toraverb. It’s really hard to find a good reverb, but I freaking love it, and I use it on almost everything. It has a wonderful tail off, and also a delay that works really well. ‘Crystal Cave’ is a favourite preset, which I use mainly on vocals. I don’t mind using the same reverb on everything, but in addition I sometimes use Logic’s Space Designer, which also has a great sound, and a wonderful tail that you can crank all the way up. The latest update, the Chronoverb, is amazing.”

Used on Minogue's vocals for "Dancing", as stated by producer Sky Adams in this July 2018 Sound on Sound interview.

"My vocal chain on the Kylie bus begins with a Logic Channel EQ, with a high?pass at 69Hz; I also boost 285Hz and 3100Hz. Next is the Waves CLA Vocals, with which I again boost some high end and add some compression, and a tiny bit of reverb; altogether it enhances the vocals a bit. The third plug?in is the Waves Butch Vig Vocals, with the de?esser and compressor both at 50 percent and adding some presence and air, all to give it some sharpness. For some reason Butch Vig gives a nice saturation and clarity on vocals, but I find that it only works on the Aston microphone. With every other mic I’ve used it tends to sound too distorted.

“The next plug?in is a Waves dbx 160 for some more compression, then the Waves SSL G?master bus compressor, set to a ratio of 2, attack 1 and release 3, and the Waves C4 multiband set to the Pensado preset, adding above 8kHz, the Waves API 560 EQ adding yet more high end, and the Waves RVox, with the compressor set to 4.2. I find that the RVox really helps to bring the vocal to the front.

“My main reverb in this session, which I used mostly on the vocals, and my favourite reverb in general, is the Toraverb. It’s really hard to find a good reverb, but I freaking love it, and I use it on almost everything. It has a wonderful tail off, and also a delay that works really well. ‘Crystal Cave’ is a favourite preset, which I use mainly on vocals. I don’t mind using the same reverb on everything, but in addition I sometimes use Logic’s Space Designer, which also has a great sound, and a wonderful tail that you can crank all the way up. The latest update, the Chronoverb, is amazing.”

Used on Minogue's vocals for "Dancing", as stated by producer Sky Adams in this July 2018 Sound on Sound interview.

"My vocal chain on the Kylie bus begins with a Logic Channel EQ, with a high?pass at 69Hz; I also boost 285Hz and 3100Hz. Next is the Waves CLA Vocals, with which I again boost some high end and add some compression, and a tiny bit of reverb; altogether it enhances the vocals a bit. The third plug?in is the Waves Butch Vig Vocals, with the de?esser and compressor both at 50 percent and adding some presence and air, all to give it some sharpness. For some reason Butch Vig gives a nice saturation and clarity on vocals, but I find that it only works on the Aston microphone. With every other mic I’ve used it tends to sound too distorted.

“The next plug?in is a Waves dbx 160 for some more compression, then the Waves SSL G?master bus compressor, set to a ratio of 2, attack 1 and release 3, and the Waves C4 multiband set to the Pensado preset, adding above 8kHz, the Waves API 560 EQ adding yet more high end, and the Waves RVox, with the compressor set to 4.2. I find that the RVox really helps to bring the vocal to the front.

“My main reverb in this session, which I used mostly on the vocals, and my favourite reverb in general, is the Toraverb. It’s really hard to find a good reverb, but I freaking love it, and I use it on almost everything. It has a wonderful tail off, and also a delay that works really well. ‘Crystal Cave’ is a favourite preset, which I use mainly on vocals. I don’t mind using the same reverb on everything, but in addition I sometimes use Logic’s Space Designer, which also has a great sound, and a wonderful tail that you can crank all the way up. The latest update, the Chronoverb, is amazing.”

Used on Minogue's vocals for "Dancing", as stated by producer Sky Adams in this July 2018 Sound on Sound interview.

"My vocal chain on the Kylie bus begins with a Logic Channel EQ, with a high?pass at 69Hz; I also boost 285Hz and 3100Hz. Next is the Waves CLA Vocals, with which I again boost some high end and add some compression, and a tiny bit of reverb; altogether it enhances the vocals a bit. The third plug?in is the Waves Butch Vig Vocals, with the de?esser and compressor both at 50 percent and adding some presence and air, all to give it some sharpness. For some reason Butch Vig gives a nice saturation and clarity on vocals, but I find that it only works on the Aston microphone. With every other mic I’ve used it tends to sound too distorted.

“The next plug?in is a Waves dbx 160 for some more compression, then the Waves SSL G?master bus compressor, set to a ratio of 2, attack 1 and release 3, and the Waves C4 multiband set to the Pensado preset, adding above 8kHz, the Waves API 560 EQ adding yet more high end, and the Waves RVox, with the compressor set to 4.2. I find that the RVox really helps to bring the vocal to the front.

“My main reverb in this session, which I used mostly on the vocals, and my favourite reverb in general, is the Toraverb. It’s really hard to find a good reverb, but I freaking love it, and I use it on almost everything. It has a wonderful tail off, and also a delay that works really well. ‘Crystal Cave’ is a favourite preset, which I use mainly on vocals. I don’t mind using the same reverb on everything, but in addition I sometimes use Logic’s Space Designer, which also has a great sound, and a wonderful tail that you can crank all the way up. The latest update, the Chronoverb, is amazing.”

Used on Minogue's vocals for "Dancing", as stated by producer Sky Adams in this July 2018 Sound on Sound interview.

"My vocal chain on the Kylie bus begins with a Logic Channel EQ, with a high?pass at 69Hz; I also boost 285Hz and 3100Hz. Next is the Waves CLA Vocals, with which I again boost some high end and add some compression, and a tiny bit of reverb; altogether it enhances the vocals a bit. The third plug?in is the Waves Butch Vig Vocals, with the de?esser and compressor both at 50 percent and adding some presence and air, all to give it some sharpness. For some reason Butch Vig gives a nice saturation and clarity on vocals, but I find that it only works on the Aston microphone. With every other mic I’ve used it tends to sound too distorted.

“The next plug?in is a Waves dbx 160 for some more compression, then the Waves SSL G?master bus compressor, set to a ratio of 2, attack 1 and release 3, and the Waves C4 multiband set to the Pensado preset, adding above 8kHz, the Waves API 560 EQ adding yet more high end, and the Waves RVox, with the compressor set to 4.2. I find that the RVox really helps to bring the vocal to the front.

“My main reverb in this session, which I used mostly on the vocals, and my favourite reverb in general, is the Toraverb. It’s really hard to find a good reverb, but I freaking love it, and I use it on almost everything. It has a wonderful tail off, and also a delay that works really well. ‘Crystal Cave’ is a favourite preset, which I use mainly on vocals. I don’t mind using the same reverb on everything, but in addition I sometimes use Logic’s Space Designer, which also has a great sound, and a wonderful tail that you can crank all the way up. The latest update, the Chronoverb, is amazing.”