Rod Stewart

Used for vocals on Another Country, as stated by mix engineer Kevin Savigar in this February 2016 Sound on Sound interview. An image of the settings can be found here.

“When we were at his house in LA I had a Neumann U67 for Rod, which I rent from LAFX. It’s an old vintage mic, which is in great shape, and which has been used on Rod’s voice for years. I also rented acoustic panels from LAFX, to control the room, which was a little live. They help to deaden the sound and also to give Rod a physical space to sing in. We kept the panels a little apart in front of him, because he likes to see me, which allows me to cue him in and give him feedback and things like that. I sat facing him, with a low table on which I have my laptop and the UAD Apollo Twin mic pre. Rod sings with Sony MDR-7506 headphones on. He likes them as they are crystal-clear and punchy.

“When we were in London I could not get a 67, so I used a U47 instead, which worked out great as well. His vocal mic goes straight into the Apollo Twin, and I used the UAD 610B tube preamp and EQ plug-in on him, which sounds nice, and some UAD 1176 with a very low threshold and not much compression at all, and UAD Helios 96 EQ to brighten his vocal sound up a bit. That was my entire input chain. Rod has a very loud voice, but also sings some passages very softly, so there’s quite a dynamic range in his vocal, and I needed the 1176 to keep that under control.

“It’s quite amazing really, because he had this nasty operation on his throat [in 2000, for thyroid cancer], with the scalpel coming within millimetres of his vocal cords. It was touch and go whether he could ever sing again. He had to completely retrain his muscles to get his voice back. But it’s now in great shape and he takes good care of it. He warms up extensively with a half-hour vocal exercise routine before he goes up to the microphone.”

(...) Kevin Savigar’s vocal chain for Rod Stewart began with the Universal Audio 610B Unison preamp plug-in, with brightness added by the same manufacturer’s Helios EQ, and dynamic control from the UAD 1176 emulation. Once again, the Waves CLA bundle came into effect, with a Waves De-Esser providing the final touches.

Used for vocals on Another Country, as stated by mix engineer Kevin Savigar in this February 2016 Sound on Sound interview. An image of the settings can be found here.

“When we were at his house in LA I had a Neumann U67 for Rod, which I rent from LAFX. It’s an old vintage mic, which is in great shape, and which has been used on Rod’s voice for years. I also rented acoustic panels from LAFX, to control the room, which was a little live. They help to deaden the sound and also to give Rod a physical space to sing in. We kept the panels a little apart in front of him, because he likes to see me, which allows me to cue him in and give him feedback and things like that. I sat facing him, with a low table on which I have my laptop and the UAD Apollo Twin mic pre. Rod sings with Sony MDR-7506 headphones on. He likes them as they are crystal-clear and punchy.

“When we were in London I could not get a 67, so I used a U47 instead, which worked out great as well. His vocal mic goes straight into the Apollo Twin, and I used the UAD 610B tube preamp and EQ plug-in on him, which sounds nice, and some UAD 1176 with a very low threshold and not much compression at all, and UAD Helios 96 EQ to brighten his vocal sound up a bit. That was my entire input chain. Rod has a very loud voice, but also sings some passages very softly, so there’s quite a dynamic range in his vocal, and I needed the 1176 to keep that under control.

“It’s quite amazing really, because he had this nasty operation on his throat [in 2000, for thyroid cancer], with the scalpel coming within millimetres of his vocal cords. It was touch and go whether he could ever sing again. He had to completely retrain his muscles to get his voice back. But it’s now in great shape and he takes good care of it. He warms up extensively with a half-hour vocal exercise routine before he goes up to the microphone.”

(...) Kevin Savigar’s vocal chain for Rod Stewart began with the Universal Audio 610B Unison preamp plug-in, with brightness added by the same manufacturer’s Helios EQ, and dynamic control from the UAD 1176 emulation. Once again, the Waves CLA bundle came into effect, with a Waves De-Esser providing the final touches.

Used for vocals on Another Country, as stated by mix engineer Kevin Savigar in this February 2016 Sound on Sound interview. An image of the settings can be found here.

Kevin Savigar’s vocal chain for Rod Stewart began with the Universal Audio 610B Unison preamp plug-in, with brightness added by the same manufacturer’s Helios EQ, and dynamic control from the UAD 1176 emulation. Once again, the Waves CLA bundle came into effect, with a Waves De-Esser providing the final touches.

"I did very little to Rod’s lead vocals during the mix. I just had the CLA Vocals plug-in on him, with a bit of ‘spank’ compression and some reverb, and a Waves De-Esser, and that was it. I used the same plug-ins on his harmony vocal, where he sings a third above his lead vocal. I think it’s the first time he has ever done a harmony vocal with himself. It’s a great sound. The backing vocals also have the CLA Vocals plug-in, on the ‘Start Me Up’ preset, plus the Tape Delay on the ‘ohs’, and they’re all sent to an effect track with the Logic Stereo Delay and Space Designer. The latter had a ‘Vocal Delay’ preset, which adds some air and room to the backing vocals."

Used for vocals on Another Country, as is visible in this image of the vocal effect chain from this February 2016 Sound on Sound interview with mix engineer Kevin Savigar. The plugin is in Insert 1 of Analog 2 of the UAD Console plugin.

Used for vocals on Another Country, as stated by mix engineer Kevin Savigar in this February 2016 Sound on Sound interview. An image of the settings, which specifies the Rev A plugin, can be found here.

“When we were at his house in LA I had a Neumann U67 for Rod, which I rent from LAFX. It’s an old vintage mic, which is in great shape, and which has been used on Rod’s voice for years. I also rented acoustic panels from LAFX, to control the room, which was a little live. They help to deaden the sound and also to give Rod a physical space to sing in. We kept the panels a little apart in front of him, because he likes to see me, which allows me to cue him in and give him feedback and things like that. I sat facing him, with a low table on which I have my laptop and the UAD Apollo Twin mic pre. Rod sings with Sony MDR-7506 headphones on. He likes them as they are crystal-clear and punchy.

“When we were in London I could not get a 67, so I used a U47 instead, which worked out great as well. His vocal mic goes straight into the Apollo Twin, and I used the UAD 610B tube preamp and EQ plug-in on him, which sounds nice, and some UAD 1176 with a very low threshold and not much compression at all, and UAD Helios 96 EQ to brighten his vocal sound up a bit. That was my entire input chain. Rod has a very loud voice, but also sings some passages very softly, so there’s quite a dynamic range in his vocal, and I needed the 1176 to keep that under control.

“It’s quite amazing really, because he had this nasty operation on his throat [in 2000, for thyroid cancer], with the scalpel coming within millimetres of his vocal cords. It was touch and go whether he could ever sing again. He had to completely retrain his muscles to get his voice back. But it’s now in great shape and he takes good care of it. He warms up extensively with a half-hour vocal exercise routine before he goes up to the microphone.”

(...) Kevin Savigar’s vocal chain for Rod Stewart began with the Universal Audio 610B Unison preamp plug-in, with brightness added by the same manufacturer’s Helios EQ, and dynamic control from the UAD 1176 emulation. Once again, the Waves CLA bundle came into effect, with a Waves De-Esser providing the final touches.

Used for vocals on Another Country, as stated by mix engineer Kevin Savigar in this February 2016 Sound on Sound interview. An image of the settings can be found here.

Kevin Savigar’s vocal chain for Rod Stewart began with the Universal Audio 610B Unison preamp plug-in, with brightness added by the same manufacturer’s Helios EQ, and dynamic control from the UAD 1176 emulation. Once again, the Waves CLA bundle came into effect, with a Waves De-Esser providing the final touches.

"I did very little to Rod’s lead vocals during the mix. I just had the CLA Vocals plug-in on him, with a bit of ‘spank’ compression and some reverb, and a Waves De-Esser, and that was it. I used the same plug-ins on his harmony vocal, where he sings a third above his lead vocal. I think it’s the first time he has ever done a harmony vocal with himself. It’s a great sound. The backing vocals also have the CLA Vocals plug-in, on the ‘Start Me Up’ preset, plus the Tape Delay on the ‘ohs’, and they’re all sent to an effect track with the Logic Stereo Delay and Space Designer. The latter had a ‘Vocal Delay’ preset, which adds some air and room to the backing vocals."

Used for vocals on Another Country, as stated by mix engineer Kevin Savigar in this February 2016 Sound on Sound interview.

"I did very little to Rod’s lead vocals during the mix. I just had the CLA Vocals plug-in on him, with a bit of ‘spank’ compression and some reverb, and a Waves De-Esser, and that was it. I used the same plug-ins on his harmony vocal, where he sings a third above his lead vocal. I think it’s the first time he has ever done a harmony vocal with himself. It’s a great sound. The backing vocals also have the CLA Vocals plug-in, on the ‘Start Me Up’ preset, plus the Tape Delay on the ‘ohs’, and they’re all sent to an effect track with the Logic Stereo Delay and Space Designer. The latter had a ‘Vocal Delay’ preset, which adds some air and room to the backing vocals."

Used for vocals on Another Country, as stated by mix engineer Kevin Savigar in this February 2016 Sound on Sound interview.

"I did very little to Rod’s lead vocals during the mix. I just had the CLA Vocals plug-in on him, with a bit of ‘spank’ compression and some reverb, and a Waves De-Esser, and that was it. I used the same plug-ins on his harmony vocal, where he sings a third above his lead vocal. I think it’s the first time he has ever done a harmony vocal with himself. It’s a great sound. The backing vocals also have the CLA Vocals plug-in, on the ‘Start Me Up’ preset, plus the Tape Delay on the ‘ohs’, and they’re all sent to an effect track with the Logic Stereo Delay and Space Designer. The latter had a ‘Vocal Delay’ preset, which adds some air and room to the backing vocals."

Used for vocals on Another Country, as is visible in this image of the vocal effect chain from this February 2016 Sound on Sound interview with mix engineer Kevin Savigar. The plugin is in Insert 1 of Aux 1 of the UAD Console plugin.