Nathan Followill

Nathan Followill of Kings of Leon was seen using a DW Black Satin Oil drum set during their performance in New Orleans, as captured in a user-uploaded photo on Youredm.

Nathan Followill was seen using a 23'' Zildjian Sweet Ride during a performance in New Orleans in 2014, as captured in a photo on Youredm.

Nathan Followill was seen using a Zildjian 20" A Medium Thin Crash cymbal during a performance in New Orleans. A user-uploaded photo on Youredm provides visual evidence of this setup from 2014.

Nathan Followill is seen using the Shure Beta 56A microphone for his vocal performances, as evidenced in a photo from Tonicgossip.

The Getty Images article features a photo of Nathan Followill using DW White Glass Finish drums during the Kings of Leon tour in 2017.

Used on the bass drum for some of Only by the Night, as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The microphones on the drums changed a lot from song to song. On the kick it could be a Beta 52, sometimes it was an RE20, or a [Sennheiser] 421, or a [Neumann] FET 47, or an NS10 [i.e. the driver from a Yamaha NS10 monitor used as a mic], or a combination. It depends on what I was trying to achieve. The mics were usually in front of the kick, or just barely inside. On one song, 'Crawl', I did put a U87 on the batter side of the kick, next to the pedal, which gives a very attack-orientated sound, with a Led Zeppelin-ish quality. On 'Sex On Fire' I used the 52, FET 47 and NS10 on the kick. I had all the kick mics on a Neve BCM10 sidecar and I'd submix them and run them through a GML EQ and then to one track on the tape. I didn't want to keep them separate. It was a matter of get the sound, make the decision, and move on.

"The snare was recorded in similar fashion to the kick. I had the option of various mics that all went through a BCM10 and were submixed, through a GML 580 EQ, then a [Empirical Labs] Distressor, just to give it some control and make sure the snare hit the tape at the right level. On the track sheet a transformerless Shure SM57 is indicated. It was something I read about a couple of years ago, and it's a really good thing. It gives a nicer, more transparent, usable sound that requires less EQ. You lose a bit of level, but typically the things that you record with a 57 are so loud anyway that it doesn't matter. So I asked the people at Blackbird to take the transformer out of one of their 57s and they were gracious enough to do this. After recording I also ran the snare and kick through an Eventide DSP4000 on a Big Muff setting, and recorded that in Pro Tools during the transfer to the computer.

"The toms were recorded with three Josephson E22S mics, which are a modern type, and they're fantastic on the toms. There were a rack of toms plus two floor toms, and I also submixed the tom mics via a BCM10 to a stereo pair, panning the toms as was appropriate for the track. The overheads were recorded with a Telefunken Elam 251 going through a Neve 1081 preamp/EQ, then an Urei 1176, and then to tape. The ride cymbal and the hi-hat were recorded with RCA77 ribbon mics, the ones that David Letterman used to have on his show. When I use a mono overhead, as I did in this case, I like using ribbons, for a good stereo spread between ride and cymbal.

"I had half a dozen mics up for the room sound: a Neumann U67, M49, AKG C12, RCA 44, and/or a Royer SF12 in the echo chamber. I'd leave the door to the echo chamber open so the sound of the drums was happening in there as well, and I'd move the room mics around to get the sound that I wanted for a particular song. I would then bus different combinations to the two room tracks, depending on the song. In the case of 'Sex On Fire' I used a U67 and an RCA 44 for Room 1, and an RCA4 4 and an SF12 for Room 2. Some of these mics went through Neve preamps, some through an old RCA tube mic that Blackbird customised. The combination of room mics was bussed through a Fairchild 670."

The driver of an NS10 was used as a bass drum microphone for some of Only by the Night, particularly on "Sex on Fire", as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The microphones on the drums changed a lot from song to song. On the kick it could be a Beta 52, sometimes it was an RE20, or a [Sennheiser] 421, or a [Neumann] FET 47, or an NS10 [i.e. the driver from a Yamaha NS10 monitor used as a mic], or a combination. It depends on what I was trying to achieve. The mics were usually in front of the kick, or just barely inside. On one song, 'Crawl', I did put a U87 on the batter side of the kick, next to the pedal, which gives a very attack-orientated sound, with a Led Zeppelin-ish quality. On 'Sex On Fire' I used the 52, FET 47 and NS10 on the kick. I had all the kick mics on a Neve BCM10 sidecar and I'd submix them and run them through a GML EQ and then to one track on the tape. I didn't want to keep them separate. It was a matter of get the sound, make the decision, and move on.

"The snare was recorded in similar fashion to the kick. I had the option of various mics that all went through a BCM10 and were submixed, through a GML 580 EQ, then a [Empirical Labs] Distressor, just to give it some control and make sure the snare hit the tape at the right level. On the track sheet a transformerless Shure SM57 is indicated. It was something I read about a couple of years ago, and it's a really good thing. It gives a nicer, more transparent, usable sound that requires less EQ. You lose a bit of level, but typically the things that you record with a 57 are so loud anyway that it doesn't matter. So I asked the people at Blackbird to take the transformer out of one of their 57s and they were gracious enough to do this. After recording I also ran the snare and kick through an Eventide DSP4000 on a Big Muff setting, and recorded that in Pro Tools during the transfer to the computer.

"The toms were recorded with three Josephson E22S mics, which are a modern type, and they're fantastic on the toms. There were a rack of toms plus two floor toms, and I also submixed the tom mics via a BCM10 to a stereo pair, panning the toms as was appropriate for the track. The overheads were recorded with a Telefunken Elam 251 going through a Neve 1081 preamp/EQ, then an Urei 1176, and then to tape. The ride cymbal and the hi-hat were recorded with RCA77 ribbon mics, the ones that David Letterman used to have on his show. When I use a mono overhead, as I did in this case, I like using ribbons, for a good stereo spread between ride and cymbal.

"I had half a dozen mics up for the room sound: a Neumann U67, M49, AKG C12, RCA 44, and/or a Royer SF12 in the echo chamber. I'd leave the door to the echo chamber open so the sound of the drums was happening in there as well, and I'd move the room mics around to get the sound that I wanted for a particular song. I would then bus different combinations to the two room tracks, depending on the song. In the case of 'Sex On Fire' I used a U67 and an RCA 44 for Room 1, and an RCA4 4 and an SF12 for Room 2. Some of these mics went through Neve preamps, some through an old RCA tube mic that Blackbird customised. The combination of room mics was bussed through a Fairchild 670."

Used on the bass drum for some of Only by the Night, particularly on "Sex on Fire", as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The microphones on the drums changed a lot from song to song. On the kick it could be a Beta 52, sometimes it was an RE20, or a [Sennheiser] 421, or a [Neumann] FET 47, or an NS10 [i.e. the driver from a Yamaha NS10 monitor used as a mic], or a combination. It depends on what I was trying to achieve. The mics were usually in front of the kick, or just barely inside. On one song, 'Crawl', I did put a U87 on the batter side of the kick, next to the pedal, which gives a very attack-orientated sound, with a Led Zeppelin-ish quality. On 'Sex On Fire' I used the 52, FET 47 and NS10 on the kick. I had all the kick mics on a Neve BCM10 sidecar and I'd submix them and run them through a GML EQ and then to one track on the tape. I didn't want to keep them separate. It was a matter of get the sound, make the decision, and move on.

"The snare was recorded in similar fashion to the kick. I had the option of various mics that all went through a BCM10 and were submixed, through a GML 580 EQ, then a [Empirical Labs] Distressor, just to give it some control and make sure the snare hit the tape at the right level. On the track sheet a transformerless Shure SM57 is indicated. It was something I read about a couple of years ago, and it's a really good thing. It gives a nicer, more transparent, usable sound that requires less EQ. You lose a bit of level, but typically the things that you record with a 57 are so loud anyway that it doesn't matter. So I asked the people at Blackbird to take the transformer out of one of their 57s and they were gracious enough to do this. After recording I also ran the snare and kick through an Eventide DSP4000 on a Big Muff setting, and recorded that in Pro Tools during the transfer to the computer.

"The toms were recorded with three Josephson E22S mics, which are a modern type, and they're fantastic on the toms. There were a rack of toms plus two floor toms, and I also submixed the tom mics via a BCM10 to a stereo pair, panning the toms as was appropriate for the track. The overheads were recorded with a Telefunken Elam 251 going through a Neve 1081 preamp/EQ, then an Urei 1176, and then to tape. The ride cymbal and the hi-hat were recorded with RCA77 ribbon mics, the ones that David Letterman used to have on his show. When I use a mono overhead, as I did in this case, I like using ribbons, for a good stereo spread between ride and cymbal.

"I had half a dozen mics up for the room sound: a Neumann U67, M49, AKG C12, RCA 44, and/or a Royer SF12 in the echo chamber. I'd leave the door to the echo chamber open so the sound of the drums was happening in there as well, and I'd move the room mics around to get the sound that I wanted for a particular song. I would then bus different combinations to the two room tracks, depending on the song. In the case of 'Sex On Fire' I used a U67 and an RCA 44 for Room 1, and an RCA4 4 and an SF12 for Room 2. Some of these mics went through Neve preamps, some through an old RCA tube mic that Blackbird customised. The combination of room mics was bussed through a Fairchild 670."

Used on as a room mic for some of Only by the Night, particularly on "Sex on Fire", as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The microphones on the drums changed a lot from song to song. On the kick it could be a Beta 52, sometimes it was an RE20, or a [Sennheiser] 421, or a [Neumann] FET 47, or an NS10 [i.e. the driver from a Yamaha NS10 monitor used as a mic], or a combination. It depends on what I was trying to achieve. The mics were usually in front of the kick, or just barely inside. On one song, 'Crawl', I did put a U87 on the batter side of the kick, next to the pedal, which gives a very attack-orientated sound, with a Led Zeppelin-ish quality. On 'Sex On Fire' I used the 52, FET 47 and NS10 on the kick. I had all the kick mics on a Neve BCM10 sidecar and I'd submix them and run them through a GML EQ and then to one track on the tape. I didn't want to keep them separate. It was a matter of get the sound, make the decision, and move on.

"The snare was recorded in similar fashion to the kick. I had the option of various mics that all went through a BCM10 and were submixed, through a GML 580 EQ, then a [Empirical Labs] Distressor, just to give it some control and make sure the snare hit the tape at the right level. On the track sheet a transformerless Shure SM57 is indicated. It was something I read about a couple of years ago, and it's a really good thing. It gives a nicer, more transparent, usable sound that requires less EQ. You lose a bit of level, but typically the things that you record with a 57 are so loud anyway that it doesn't matter. So I asked the people at Blackbird to take the transformer out of one of their 57s and they were gracious enough to do this. After recording I also ran the snare and kick through an Eventide DSP4000 on a Big Muff setting, and recorded that in Pro Tools during the transfer to the computer.

"The toms were recorded with three Josephson E22S mics, which are a modern type, and they're fantastic on the toms. There were a rack of toms plus two floor toms, and I also submixed the tom mics via a BCM10 to a stereo pair, panning the toms as was appropriate for the track. The overheads were recorded with a Telefunken Elam 251 going through a Neve 1081 preamp/EQ, then an Urei 1176, and then to tape. The ride cymbal and the hi-hat were recorded with RCA77 ribbon mics, the ones that David Letterman used to have on his show. When I use a mono overhead, as I did in this case, I like using ribbons, for a good stereo spread between ride and cymbal.

"I had half a dozen mics up for the room sound: a Neumann U67, M49, AKG C12, RCA 44, and/or a Royer SF12 in the echo chamber. I'd leave the door to the echo chamber open so the sound of the drums was happening in there as well, and I'd move the room mics around to get the sound that I wanted for a particular song. I would then bus different combinations to the two room tracks, depending on the song. In the case of 'Sex On Fire' I used a U67 and an RCA 44 for Room 1, and an RCA4 4 and an SF12 for Room 2. Some of these mics went through Neve preamps, some through an old RCA tube mic that Blackbird customised. The combination of room mics was bussed through a Fairchild 670."

The ribbon microphone list for Blackbird Studios, where Only by the Night was recorded, specifies a 44-BX.

Used as a room mic for some of Only by the Night, particularly on "Sex on Fire", as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The microphones on the drums changed a lot from song to song. On the kick it could be a Beta 52, sometimes it was an RE20, or a [Sennheiser] 421, or a [Neumann] FET 47, or an NS10 [i.e. the driver from a Yamaha NS10 monitor used as a mic], or a combination. It depends on what I was trying to achieve. The mics were usually in front of the kick, or just barely inside. On one song, 'Crawl', I did put a U87 on the batter side of the kick, next to the pedal, which gives a very attack-orientated sound, with a Led Zeppelin-ish quality. On 'Sex On Fire' I used the 52, FET 47 and NS10 on the kick. I had all the kick mics on a Neve BCM10 sidecar and I'd submix them and run them through a GML EQ and then to one track on the tape. I didn't want to keep them separate. It was a matter of get the sound, make the decision, and move on.

"The snare was recorded in similar fashion to the kick. I had the option of various mics that all went through a BCM10 and were submixed, through a GML 580 EQ, then a [Empirical Labs] Distressor, just to give it some control and make sure the snare hit the tape at the right level. On the track sheet a transformerless Shure SM57 is indicated. It was something I read about a couple of years ago, and it's a really good thing. It gives a nicer, more transparent, usable sound that requires less EQ. You lose a bit of level, but typically the things that you record with a 57 are so loud anyway that it doesn't matter. So I asked the people at Blackbird to take the transformer out of one of their 57s and they were gracious enough to do this. After recording I also ran the snare and kick through an Eventide DSP4000 on a Big Muff setting, and recorded that in Pro Tools during the transfer to the computer.

"The toms were recorded with three Josephson E22S mics, which are a modern type, and they're fantastic on the toms. There were a rack of toms plus two floor toms, and I also submixed the tom mics via a BCM10 to a stereo pair, panning the toms as was appropriate for the track. The overheads were recorded with a Telefunken Elam 251 going through a Neve 1081 preamp/EQ, then an Urei 1176, and then to tape. The ride cymbal and the hi-hat were recorded with RCA77 ribbon mics, the ones that David Letterman used to have on his show. When I use a mono overhead, as I did in this case, I like using ribbons, for a good stereo spread between ride and cymbal.

"I had half a dozen mics up for the room sound: a Neumann U67, M49, AKG C12, RCA 44, and/or a Royer SF12 in the echo chamber. I'd leave the door to the echo chamber open so the sound of the drums was happening in there as well, and I'd move the room mics around to get the sound that I wanted for a particular song. I would then bus different combinations to the two room tracks, depending on the song. In the case of 'Sex On Fire' I used a U67 and an RCA 44 for Room 1, and an RCA4 4 and an SF12 for Room 2. Some of these mics went through Neve preamps, some through an old RCA tube mic that Blackbird customised. The combination of room mics was bussed through a Fairchild 670."

Used on the toms on Only by the Night, as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The microphones on the drums changed a lot from song to song. On the kick it could be a Beta 52, sometimes it was an RE20, or a [Sennheiser] 421, or a [Neumann] FET 47, or an NS10 [i.e. the driver from a Yamaha NS10 monitor used as a mic], or a combination. It depends on what I was trying to achieve. The mics were usually in front of the kick, or just barely inside. On one song, 'Crawl', I did put a U87 on the batter side of the kick, next to the pedal, which gives a very attack-orientated sound, with a Led Zeppelin-ish quality. On 'Sex On Fire' I used the 52, FET 47 and NS10 on the kick. I had all the kick mics on a Neve BCM10 sidecar and I'd submix them and run them through a GML EQ and then to one track on the tape. I didn't want to keep them separate. It was a matter of get the sound, make the decision, and move on.

"The snare was recorded in similar fashion to the kick. I had the option of various mics that all went through a BCM10 and were submixed, through a GML 580 EQ, then a [Empirical Labs] Distressor, just to give it some control and make sure the snare hit the tape at the right level. On the track sheet a transformerless Shure SM57 is indicated. It was something I read about a couple of years ago, and it's a really good thing. It gives a nicer, more transparent, usable sound that requires less EQ. You lose a bit of level, but typically the things that you record with a 57 are so loud anyway that it doesn't matter. So I asked the people at Blackbird to take the transformer out of one of their 57s and they were gracious enough to do this. After recording I also ran the snare and kick through an Eventide DSP4000 on a Big Muff setting, and recorded that in Pro Tools during the transfer to the computer.

"The toms were recorded with three Josephson E22S mics, which are a modern type, and they're fantastic on the toms. There were a rack of toms plus two floor toms, and I also submixed the tom mics via a BCM10 to a stereo pair, panning the toms as was appropriate for the track. The overheads were recorded with a Telefunken Elam 251 going through a Neve 1081 preamp/EQ, then an Urei 1176, and then to tape. The ride cymbal and the hi-hat were recorded with RCA77 ribbon mics, the ones that David Letterman used to have on his show. When I use a mono overhead, as I did in this case, I like using ribbons, for a good stereo spread between ride and cymbal.

"I had half a dozen mics up for the room sound: a Neumann U67, M49, AKG C12, RCA 44, and/or a Royer SF12 in the echo chamber. I'd leave the door to the echo chamber open so the sound of the drums was happening in there as well, and I'd move the room mics around to get the sound that I wanted for a particular song. I would then bus different combinations to the two room tracks, depending on the song. In the case of 'Sex On Fire' I used a U67 and an RCA 44 for Room 1, and an RCA4 4 and an SF12 for Room 2. Some of these mics went through Neve preamps, some through an old RCA tube mic that Blackbird customised. The combination of room mics was bussed through a Fairchild 670."

A transformerless SM57 was used for some of the snare drum on Only by the Night, particularly on "Sex on Fire", as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The microphones on the drums changed a lot from song to song. On the kick it could be a Beta 52, sometimes it was an RE20, or a [Sennheiser] 421, or a [Neumann] FET 47, or an NS10 [i.e. the driver from a Yamaha NS10 monitor used as a mic], or a combination. It depends on what I was trying to achieve. The mics were usually in front of the kick, or just barely inside. On one song, 'Crawl', I did put a U87 on the batter side of the kick, next to the pedal, which gives a very attack-orientated sound, with a Led Zeppelin-ish quality. On 'Sex On Fire' I used the 52, FET 47 and NS10 on the kick. I had all the kick mics on a Neve BCM10 sidecar and I'd submix them and run them through a GML EQ and then to one track on the tape. I didn't want to keep them separate. It was a matter of get the sound, make the decision, and move on.

"The snare was recorded in similar fashion to the kick. I had the option of various mics that all went through a BCM10 and were submixed, through a GML 580 EQ, then a [Empirical Labs] Distressor, just to give it some control and make sure the snare hit the tape at the right level. On the track sheet a transformerless Shure SM57 is indicated. It was something I read about a couple of years ago, and it's a really good thing. It gives a nicer, more transparent, usable sound that requires less EQ. You lose a bit of level, but typically the things that you record with a 57 are so loud anyway that it doesn't matter. So I asked the people at Blackbird to take the transformer out of one of their 57s and they were gracious enough to do this. After recording I also ran the snare and kick through an Eventide DSP4000 on a Big Muff setting, and recorded that in Pro Tools during the transfer to the computer.

"The toms were recorded with three Josephson E22S mics, which are a modern type, and they're fantastic on the toms. There were a rack of toms plus two floor toms, and I also submixed the tom mics via a BCM10 to a stereo pair, panning the toms as was appropriate for the track. The overheads were recorded with a Telefunken Elam 251 going through a Neve 1081 preamp/EQ, then an Urei 1176, and then to tape. The ride cymbal and the hi-hat were recorded with RCA77 ribbon mics, the ones that David Letterman used to have on his show. When I use a mono overhead, as I did in this case, I like using ribbons, for a good stereo spread between ride and cymbal.

"I had half a dozen mics up for the room sound: a Neumann U67, M49, AKG C12, RCA 44, and/or a Royer SF12 in the echo chamber. I'd leave the door to the echo chamber open so the sound of the drums was happening in there as well, and I'd move the room mics around to get the sound that I wanted for a particular song. I would then bus different combinations to the two room tracks, depending on the song. In the case of 'Sex On Fire' I used a U67 and an RCA 44 for Room 1, and an RCA4 4 and an SF12 for Room 2. Some of these mics went through Neve preamps, some through an old RCA tube mic that Blackbird customised. The combination of room mics was bussed through a Fairchild 670."

Used as an overhead mic on Only by the Night, as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The microphones on the drums changed a lot from song to song. On the kick it could be a Beta 52, sometimes it was an RE20, or a [Sennheiser] 421, or a [Neumann] FET 47, or an NS10 [i.e. the driver from a Yamaha NS10 monitor used as a mic], or a combination. It depends on what I was trying to achieve. The mics were usually in front of the kick, or just barely inside. On one song, 'Crawl', I did put a U87 on the batter side of the kick, next to the pedal, which gives a very attack-orientated sound, with a Led Zeppelin-ish quality. On 'Sex On Fire' I used the 52, FET 47 and NS10 on the kick. I had all the kick mics on a Neve BCM10 sidecar and I'd submix them and run them through a GML EQ and then to one track on the tape. I didn't want to keep them separate. It was a matter of get the sound, make the decision, and move on.

"The snare was recorded in similar fashion to the kick. I had the option of various mics that all went through a BCM10 and were submixed, through a GML 580 EQ, then a [Empirical Labs] Distressor, just to give it some control and make sure the snare hit the tape at the right level. On the track sheet a transformerless Shure SM57 is indicated. It was something I read about a couple of years ago, and it's a really good thing. It gives a nicer, more transparent, usable sound that requires less EQ. You lose a bit of level, but typically the things that you record with a 57 are so loud anyway that it doesn't matter. So I asked the people at Blackbird to take the transformer out of one of their 57s and they were gracious enough to do this. After recording I also ran the snare and kick through an Eventide DSP4000 on a Big Muff setting, and recorded that in Pro Tools during the transfer to the computer.

"The toms were recorded with three Josephson E22S mics, which are a modern type, and they're fantastic on the toms. There were a rack of toms plus two floor toms, and I also submixed the tom mics via a BCM10 to a stereo pair, panning the toms as was appropriate for the track. The overheads were recorded with a Telefunken Elam 251 going through a Neve 1081 preamp/EQ, then an Urei 1176, and then to tape. The ride cymbal and the hi-hat were recorded with RCA77 ribbon mics, the ones that David Letterman used to have on his show. When I use a mono overhead, as I did in this case, I like using ribbons, for a good stereo spread between ride and cymbal.

"I had half a dozen mics up for the room sound: a Neumann U67, M49, AKG C12, RCA 44, and/or a Royer SF12 in the echo chamber. I'd leave the door to the echo chamber open so the sound of the drums was happening in there as well, and I'd move the room mics around to get the sound that I wanted for a particular song. I would then bus different combinations to the two room tracks, depending on the song. In the case of 'Sex On Fire' I used a U67 and an RCA 44 for Room 1, and an RCA4 4 and an SF12 for Room 2. Some of these mics went through Neve preamps, some through an old RCA tube mic that Blackbird customised. The combination of room mics was bussed through a Fairchild 670."

Used on "the batter side of the kick" for "Crawl", as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The microphones on the drums changed a lot from song to song. On the kick it could be a Beta 52, sometimes it was an RE20, or a [Sennheiser] 421, or a [Neumann] FET 47, or an NS10 [i.e. the driver from a Yamaha NS10 monitor used as a mic], or a combination. It depends on what I was trying to achieve. The mics were usually in front of the kick, or just barely inside. On one song, 'Crawl', I did put a U87 on the batter side of the kick, next to the pedal, which gives a very attack-orientated sound, with a Led Zeppelin-ish quality. On 'Sex On Fire' I used the 52, FET 47 and NS10 on the kick. I had all the kick mics on a Neve BCM10 sidecar and I'd submix them and run them through a GML EQ and then to one track on the tape. I didn't want to keep them separate. It was a matter of get the sound, make the decision, and move on."

Used to submix the bass drum, snare and toms on Only by the Night, as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The microphones on the drums changed a lot from song to song. On the kick it could be a Beta 52, sometimes it was an RE20, or a [Sennheiser] 421, or a [Neumann] FET 47, or an NS10 [i.e. the driver from a Yamaha NS10 monitor used as a mic], or a combination. It depends on what I was trying to achieve. The mics were usually in front of the kick, or just barely inside. On one song, 'Crawl', I did put a U87 on the batter side of the kick, next to the pedal, which gives a very attack-orientated sound, with a Led Zeppelin-ish quality. On 'Sex On Fire' I used the 52, FET 47 and NS10 on the kick. I had all the kick mics on a Neve BCM10 sidecar and I'd submix them and run them through a GML EQ and then to one track on the tape. I didn't want to keep them separate. It was a matter of get the sound, make the decision, and move on.

"The snare was recorded in similar fashion to the kick. I had the option of various mics that all went through a BCM10 and were submixed, through a GML 580 EQ, then a [Empirical Labs] Distressor, just to give it some control and make sure the snare hit the tape at the right level. On the track sheet a transformerless Shure SM57 is indicated. It was something I read about a couple of years ago, and it's a really good thing. It gives a nicer, more transparent, usable sound that requires less EQ. You lose a bit of level, but typically the things that you record with a 57 are so loud anyway that it doesn't matter. So I asked the people at Blackbird to take the transformer out of one of their 57s and they were gracious enough to do this. After recording I also ran the snare and kick through an Eventide DSP4000 on a Big Muff setting, and recorded that in Pro Tools during the transfer to the computer.

"The toms were recorded with three Josephson E22S mics, which are a modern type, and they're fantastic on the toms. There were a rack of toms plus two floor toms, and I also submixed the tom mics via a BCM10 to a stereo pair, panning the toms as was appropriate for the track. The overheads were recorded with a Telefunken Elam 251 going through a Neve 1081 preamp/EQ, then an Urei 1176, and then to tape. The ride cymbal and the hi-hat were recorded with RCA77 ribbon mics, the ones that David Letterman used to have on his show. When I use a mono overhead, as I did in this case, I like using ribbons, for a good stereo spread between ride and cymbal.

"I had half a dozen mics up for the room sound: a Neumann U67, M49, AKG C12, RCA 44, and/or a Royer SF12 in the echo chamber. I'd leave the door to the echo chamber open so the sound of the drums was happening in there as well, and I'd move the room mics around to get the sound that I wanted for a particular song. I would then bus different combinations to the two room tracks, depending on the song. In the case of 'Sex On Fire' I used a U67 and an RCA 44 for Room 1, and an RCA4 4 and an SF12 for Room 2. Some of these mics went through Neve preamps, some through an old RCA tube mic that Blackbird customised. The combination of room mics was bussed through a Fairchild 670."

Used in "a Big Muff setting" on the bass drum and snare on Only by the Night, as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The microphones on the drums changed a lot from song to song. On the kick it could be a Beta 52, sometimes it was an RE20, or a [Sennheiser] 421, or a [Neumann] FET 47, or an NS10 [i.e. the driver from a Yamaha NS10 monitor used as a mic], or a combination. It depends on what I was trying to achieve. The mics were usually in front of the kick, or just barely inside. On one song, 'Crawl', I did put a U87 on the batter side of the kick, next to the pedal, which gives a very attack-orientated sound, with a Led Zeppelin-ish quality. On 'Sex On Fire' I used the 52, FET 47 and NS10 on the kick. I had all the kick mics on a Neve BCM10 sidecar and I'd submix them and run them through a GML EQ and then to one track on the tape. I didn't want to keep them separate. It was a matter of get the sound, make the decision, and move on.

"The snare was recorded in similar fashion to the kick. I had the option of various mics that all went through a BCM10 and were submixed, through a GML 580 EQ, then a [Empirical Labs] Distressor, just to give it some control and make sure the snare hit the tape at the right level. On the track sheet a transformerless Shure SM57 is indicated. It was something I read about a couple of years ago, and it's a really good thing. It gives a nicer, more transparent, usable sound that requires less EQ. You lose a bit of level, but typically the things that you record with a 57 are so loud anyway that it doesn't matter. So I asked the people at Blackbird to take the transformer out of one of their 57s and they were gracious enough to do this. After recording I also ran the snare and kick through an Eventide DSP4000 on a Big Muff setting, and recorded that in Pro Tools during the transfer to the computer."

Used on the overhead mics for Only by the Night, as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The overheads were recorded with a Telefunken Elam 251 going through a Neve 1081 preamp/EQ, then an Urei 1176, and then to tape."

Used on the overhead mics for Only by the Night, as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The overheads were recorded with a Telefunken Elam 251 going through a Neve 1081 preamp/EQ, then an Urei 1176, and then to tape."

Used on the bass drum for some of Only by the Night, as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"The microphones on the drums changed a lot from song to song. On the kick it could be a Beta 52, sometimes it was an RE20, or a [Sennheiser] 421, or a [Neumann] FET 47, or an NS10 [i.e. the driver from a Yamaha NS10 monitor used as a mic], or a combination. It depends on what I was trying to achieve. The mics were usually in front of the kick, or just barely inside. On one song, 'Crawl', I did put a U87 on the batter side of the kick, next to the pedal, which gives a very attack-orientated sound, with a Led Zeppelin-ish quality. On 'Sex On Fire' I used the 52, FET 47 and NS10 on the kick. I had all the kick mics on a Neve BCM10 sidecar and I'd submix them and run them through a GML EQ and then to one track on the tape. I didn't want to keep them separate. It was a matter of get the sound, make the decision, and move on."

Used as a room mic for some of Only by the Night, as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"I had half a dozen mics up for the room sound: a Neumann U67, M49, AKG C12, RCA 44, and/or a Royer SF12 in the echo chamber. I'd leave the door to the echo chamber open so the sound of the drums was happening in there as well, and I'd move the room mics around to get the sound that I wanted for a particular song. I would then bus different combinations to the two room tracks, depending on the song. In the case of 'Sex On Fire' I used a U67 and an RCA 44 for Room 1, and an RCA4 4 and an SF12 for Room 2. Some of these mics went through Neve preamps, some through an old RCA tube mic that Blackbird customised. The combination of room mics was bussed through a Fairchild 670."

The Blackbird Studios condenser microphone list has both the M 49 and the M 49 B. Given that lack of King's specification and the fact the microphones are aesthetically different enough to distinguish each other (which would otherwise encourage specification anyway), the version used was most likely the original.

Used on the rooms mics for Only by the Night, as stated by producer Jacques King in this December 2008 Sound on Sound interview.

"I had half a dozen mics up for the room sound: a Neumann U67, M49, AKG C12, RCA 44, and/or a Royer SF12 in the echo chamber. I'd leave the door to the echo chamber open so the sound of the drums was happening in there as well, and I'd move the room mics around to get the sound that I wanted for a particular song. I would then bus different combinations to the two room tracks, depending on the song. In the case of 'Sex On Fire' I used a U67 and an RCA 44 for Room 1, and an RCA4 4 and an SF12 for Room 2. Some of these mics went through Neve preamps, some through an old RCA tube mic that Blackbird customised. The combination of room mics was bussed through a Fairchild 670."

Used on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview. An image of the settings can be found here.

• Drums: Massenburg DesignWorks EQ, Bomb Factory BF76, Digidesign Lo–fi, Quad 8 EQ, Chandler TG1, Sontec EQ, Audio Ease Altiverb

"I cut the kick around 255Hz to get rid of some honkiness, and added some 11k on the snare, both with the Massenburg DesignWorks. I also cut a tiny bit around 263Hz on the overheads, and sent them through a Bomb Factory BF76, which is a plug–in version of the 1176, just to control the snare transients a little bit in the overhead picture. I also EQed the toms to roll back some of the tubbiness on them. There's a Lo–fi plug-in on Room 1, to take the cymbal wash down and dirty it up; when you reduce the sample rate and bit depth you also lose high frequencies. I cut everything below 206Hz with the Massenburg on the Simmons drums to clean up any unwanted frequencies. For the rest, there's nothing dramatic on the drums, just some specific shaping with digital EQs and opening up the top and bottom with outboard or the Quad 8 EQ. All the drums were bussed and sent to an outboard compressor, the Chandler TG1, for parallel bus compression. I also had a Sontec EQ on the drum bus. The Altiverb works primarily on the snare, kick and toms, just to give them a little bit more space. I set it to a room at Ocean Way Studios, so it's not a big splashy reverb."

Used on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview.

• Drums: Massenburg DesignWorks EQ, Bomb Factory BF76, Digidesign Lo–fi, Quad 8 EQ, Chandler TG1, Sontec EQ, Audio Ease Altiverb

"I cut the kick around 255Hz to get rid of some honkiness, and added some 11k on the snare, both with the Massenburg DesignWorks. I also cut a tiny bit around 263Hz on the overheads, and sent them through a Bomb Factory BF76, which is a plug–in version of the 1176, just to control the snare transients a little bit in the overhead picture. I also EQed the toms to roll back some of the tubbiness on them. There's a Lo–fi plug-in on Room 1, to take the cymbal wash down and dirty it up; when you reduce the sample rate and bit depth you also lose high frequencies. I cut everything below 206Hz with the Massenburg on the Simmons drums to clean up any unwanted frequencies. For the rest, there's nothing dramatic on the drums, just some specific shaping with digital EQs and opening up the top and bottom with outboard or the Quad 8 EQ. All the drums were bussed and sent to an outboard compressor, the Chandler TG1, for parallel bus compression. I also had a Sontec EQ on the drum bus. The Altiverb works primarily on the snare, kick and toms, just to give them a little bit more space. I set it to a room at Ocean Way Studios, so it's not a big splashy reverb."

The original Digidesign version was used on the overhead mics and room mics for Only by the Night, particularly on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview. An image of the settings can be found here.

As well as numerous EQ plug–ins (not shown), drum processing encompassed BF76 and Lo–fi plug–ins on overheads and room mics respectively, with reverb courtesy of Altiverb.

(...) Drums: Massenburg DesignWorks EQ, Bomb Factory BF76, Digidesign Lo–fi, Quad 8 EQ, Chandler TG1, Sontec EQ, Audio Ease Altiverb

"I cut the kick around 255Hz to get rid of some honkiness, and added some 11k on the snare, both with the Massenburg DesignWorks. I also cut a tiny bit around 263Hz on the overheads, and sent them through a Bomb Factory BF76, which is a plug–in version of the 1176, just to control the snare transients a little bit in the overhead picture. I also EQed the toms to roll back some of the tubbiness on them. There's a Lo–fi plug-in on Room 1, to take the cymbal wash down and dirty it up; when you reduce the sample rate and bit depth you also lose high frequencies. I cut everything below 206Hz with the Massenburg on the Simmons drums to clean up any unwanted frequencies. For the rest, there's nothing dramatic on the drums, just some specific shaping with digital EQs and opening up the top and bottom with outboard or the Quad 8 EQ. All the drums were bussed and sent to an outboard compressor, the Chandler TG1, for parallel bus compression. I also had a Sontec EQ on the drum bus. The Altiverb works primarily on the snare, kick and toms, just to give them a little bit more space. I set it to a room at Ocean Way Studios, so it's not a big splashy reverb."

Used on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview.

• Drums: Massenburg DesignWorks EQ, Bomb Factory BF76, Digidesign Lo–fi, Quad 8 EQ, Chandler TG1, Sontec EQ, Audio Ease Altiverb

"I cut the kick around 255Hz to get rid of some honkiness, and added some 11k on the snare, both with the Massenburg DesignWorks. I also cut a tiny bit around 263Hz on the overheads, and sent them through a Bomb Factory BF76, which is a plug–in version of the 1176, just to control the snare transients a little bit in the overhead picture. I also EQed the toms to roll back some of the tubbiness on them. There's a Lo–fi plug-in on Room 1, to take the cymbal wash down and dirty it up; when you reduce the sample rate and bit depth you also lose high frequencies. I cut everything below 206Hz with the Massenburg on the Simmons drums to clean up any unwanted frequencies. For the rest, there's nothing dramatic on the drums, just some specific shaping with digital EQs and opening up the top and bottom with outboard or the Quad 8 EQ. All the drums were bussed and sent to an outboard compressor, the Chandler TG1, for parallel bus compression. I also had a Sontec EQ on the drum bus. The Altiverb works primarily on the snare, kick and toms, just to give them a little bit more space. I set it to a room at Ocean Way Studios, so it's not a big splashy reverb."

The item can be seen in this photo from the same interview.

This rack houses most of the outboard processors used on the mix of 'Sex On Fire', including the Sontec EQ, Neve 1099, 'blue stripe' Urei 1176, Teletronix LA3A, Empirical Labs Distressor, Dbx 902, Chandler TG1 and Dolby A encoders.

Used on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview.

• Drums: Massenburg DesignWorks EQ, Bomb Factory BF76, Digidesign Lo–fi, Quad 8 EQ, Chandler TG1, Sontec EQ, Audio Ease Altiverb

"I cut the kick around 255Hz to get rid of some honkiness, and added some 11k on the snare, both with the Massenburg DesignWorks. I also cut a tiny bit around 263Hz on the overheads, and sent them through a Bomb Factory BF76, which is a plug–in version of the 1176, just to control the snare transients a little bit in the overhead picture. I also EQed the toms to roll back some of the tubbiness on them. There's a Lo–fi plug-in on Room 1, to take the cymbal wash down and dirty it up; when you reduce the sample rate and bit depth you also lose high frequencies. I cut everything below 206Hz with the Massenburg on the Simmons drums to clean up any unwanted frequencies. For the rest, there's nothing dramatic on the drums, just some specific shaping with digital EQs and opening up the top and bottom with outboard or the Quad 8 EQ. All the drums were bussed and sent to an outboard compressor, the Chandler TG1, for parallel bus compression. I also had a Sontec EQ on the drum bus. The Altiverb works primarily on the snare, kick and toms, just to give them a little bit more space. I set it to a room at Ocean Way Studios, so it's not a big splashy reverb."

The item is visible in this photo from the same interview, in addition to being listed on Blackbird Studios' The Audio Hunt profile page.

Used on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview. An image of the settings for Caleb Followill's "vocal buss" reveals it to be the 3.0 version, then the latest version.

• Drums: Massenburg DesignWorks EQ, Bomb Factory BF76, Digidesign Lo–fi, Quad 8 EQ, Chandler TG1, Sontec EQ, Audio Ease Altiverb

"I cut the kick around 255Hz to get rid of some honkiness, and added some 11k on the snare, both with the Massenburg DesignWorks. I also cut a tiny bit around 263Hz on the overheads, and sent them through a Bomb Factory BF76, which is a plug–in version of the 1176, just to control the snare transients a little bit in the overhead picture. I also EQed the toms to roll back some of the tubbiness on them. There's a Lo–fi plug-in on Room 1, to take the cymbal wash down and dirty it up; when you reduce the sample rate and bit depth you also lose high frequencies. I cut everything below 206Hz with the Massenburg on the Simmons drums to clean up any unwanted frequencies. For the rest, there's nothing dramatic on the drums, just some specific shaping with digital EQs and opening up the top and bottom with outboard or the Quad 8 EQ. All the drums were bussed and sent to an outboard compressor, the Chandler TG1, for parallel bus compression. I also had a Sontec EQ on the drum bus. The Altiverb works primarily on the snare, kick and toms, just to give them a little bit more space. I set it to a room at Ocean Way Studios, so it's not a big splashy reverb."

In this facebook post and picture you can clearly see Nathan using a satin sea foam green tom. He is currently using this kit live for the 2022 When you see yourself tour its all DW drums mismatched colors. Can anyone tell the cymbals he is using?