Manny Marroquin

In an article by Paul Tingen on AudioTechnology, audio engineer Manny Marroquin states, "The Thermionic Culture Vulture also has been a real inspiration in terms of adding grit to the digital gloss."

In an article by Paul Tingen for AudioTechnology, audio engineer Manny Marroquin states, "The Bricasti is my favourite reverb. There were digital reverbs before, but there’s nothing like it, and it’s very inspiring to work with," confirming his use of the Bricasti Design M7.

In an interview with Gearspace, audio engineer Manny Marroquin stated, "My favorite delay is a PCM 42," confirming his use of the Lexicon PCM 42 effects processor.

In an interview on Gearspace, audio engineer Manny Marroquin stated, "I'm using the Apogee AD-16 in and out. I've been using those forever," confirming his use of the Apogee AD16X.

Manny Marroquin confirms his use of the Eventide H3000 Ultra Harmonizer Effects Processor, stating, "Out of the box I still love my [Eventide] H3000 Harmonizer," as reported by Daniel Griffiths in an interview on MusicRadar.

Audio engineer Manny Marroquin has confirmed his use of the TC Electronic 2290 Dynamic Digital Delay, stating, "I also love the Valhalla reverb, the [Soundtoys] Echoboy. Out of the box I still love my [Eventide] H3000 Harmonizer, I love my [Lexicon] PCM42, my [TC Electronic] 2290." This information is sourced from an interview with Daniel Griffiths, published on MusicRadar.

In the 2013 interview on Pensado's Place, Manny Marroquin specifically mentions using the Universal Audio 1176LN on lead vocals.

In a 2013 interview on Pensado's Place, audio engineer Manny Marroquin mentioned using the Avalon AD2044 Dual Mono-Stereo Pure Class A Discrete Optical Compressor on snare.

In the 2013 episode of "Pensado's Place," Manny Marroquin, a renowned audio engineer, mentions his use of the Pultec EQP-1A3 Equalizer for parallel compression, specifically when discussing bass synths.

In a 2013 interview on Pensado's Place, audio engineer Manny Marroquin discusses his approach to bass synths and mentions his use of parallel compression, specifically citing the Neve 33609C Stereo Limiter/Compressor and Pultec as part of his technique.

In a 2013 interview on Pensado's Place, Manny Marroquin mentions using the Retro Instruments Sta-Level Tube Compressor on a mono bass synth.

In the 2013 episode of Pensado's Place, audio engineer Manny Marroquin referred to the Quad Eight Electronics MM-310 Classic as his "island piece of gear," highlighting its versatility and describing it as one of the most musical sounding EQs available. This statement provides clear evidence of his use and preference for this specific equipment.

Audio engineer Manny Marroquin is confirmed to have used the Solid State Logic SL 4000, as detailed in a source from Solid State Logic. Marroquin stated, “I was a fan of the J, but not as much as the G. The G has the best compressors on any console by far – there is nothing that comes close to it. To this day, this is my favourite compressor.” The source notes that Studio Two initially featured a 4000G console, which was later replaced by a 9000J, underscoring Marroquin's preference for the SL 4000G's sound and compression capabilities.

“When I EQ, I’m looking to do something creative rather than just ‘clean up.’ That’s when I go for one of my six go-to EQs: SSL 9080 XL K for its high and low pass filters; Quad 8 or Neve 1073 for the low end; Quad 8 or Motown for lows/low mids; Motown, 1073 and API 550B for mids/high mids; and Avalon 2055 for its silky high end.

“When I EQ, I’m looking to do something creative rather than just ‘clean up.’ That’s when I go for one of my six go-to EQs: SSL 9080 XL K for its high and low pass filters; Quad 8 or Neve 1073 for the low end; Quad 8 or Motown for lows/low mids; Motown, 1073 and API 550B for mids/high mids; and Avalon 2055 for its silky high end.

“When I EQ, I’m looking to do something creative rather than just ‘clean up.’ That’s when I go for one of my six go-to EQs: SSL 9080 XL K for its high and low pass filters; Quad 8 or Neve 1073 for the low end; Quad 8 or Motown for lows/low mids; Motown, 1073 and API 550B for mids/high mids; and Avalon 2055 for its silky high end.

Larrabee Studio 2 Equipment List https://www.larrabeestudios.com/s/Studio23.doc

"I also applied a lot of parallel compression with the Distressor on the vocals" on Linkin Park's Burn It Down

Rather than put it straight on his mix buss, Marroquin started off using the Fusion on stereo keyboard tracks, then guitars.

“Because I am still on the big SSL - so not in the box – I've been using Fusion as an insert,” he says. “I have got to tell you, I just loved what I heard. It's like having a chain of three or four different plugins all in one. And if like so many people, you are working in the box, you can just put it across part of your stereo buss chain, which is great, because it's got an EQ, it's got a Vintage Drive, a spreader – it's just a very versatile box, and one of my favourite toys right now!”

Fusion can really improve the stereo image of a sound, Marroquin reveals: “I have been using it on a lot of synths – especially if they're playing a melodic line, because Fusion allows me to control how wide I want it to be: I can EQ it very quickly, I can add filters to it; I can make it so that it fits perfectly in the mix, and it's still punchy. I am sure I can use it on a lot of other things, too – on backing vocals for R&B records, I know this will sound delicious.

“It'll also work as a great sweetener, so you can make your mixes super-wide using this box; and SSL have done such a great job too, as it's so simple. Some mixers will do a whole song, and at the very end, they'll just slap on that final EQ or compressor, or a tiny little bit of air at the end of the mix; not to master, but to give it that extra 5%. And this is perfect for that. If you're in the box, put Fusion on bypass, have it in your chain, then towards the end of your mix, just pop it in, and wait for the whole mix to pop out, man!”

“I have got to tell you, I just loved what I heard. It's like having a chain of three or four different plugins all in one. And if like so many people, you are working in the box, you can just put it across part of your stereo buss chain, which is great, because it's got an EQ, it's got a vintage drive, a spreader – it's just a very versatile box, and one of my favourite toys right now!” Manny Marroquin

"He used a Sony C800 condenser microphone to take advantage of the Sony's higher sensitivity under the circumstances, but running it through his usual signal chain of a Neve 1073 EQ and a Tube-tech CL1B compressor straight into Pro Tools."

Marroquin finds that creating stems as he mixes makes for more efficient mixes later on. Based on an audio post-production methodology, he'll create submixes of guitars, drums, percussion, keys and even background vocals. The key, says Marroquin, is to compress these stems, rather than the overall stereo mix. "I'll send individual elements, like the kick and snare, to their own compressors," he explains. "I'll put them on separate busses and send them to a Fairchild 670

"One of the hardest things to do is to get rid of sibilance using only EQ without affecting the presense of the vocal," he says. "It's an art. I use a Dbx 902 de-esser, which is one of the best-sounding de-essers out there. But it only has one frequency per curve. So I do the de-essing using the SSL EQs through a side-chain. They allow you to really key in on the affected frequencies.

Marroquin also worked on singer Pink's first album, produced in 1997 by Babyface and the hip-hop team Presidential Campaign. The record, which spawned the minor hit 'Most Girls', was "Pink before she was Pink", he says, as the singer was developing both a persona and a performance style. In keeping with her own sharp edges, Marroquin used a combination of pro reverbs, including an AMS and Lexicon 480L and 224XL units, and the clangy spring reverb from a Fender guitar amp. "Hip-hop can tend to have very little reverb, and what there is is short," he says. "When I get kind of off-the-wall records, I like to play with spring reverbs. They're cool-sounding. You can make it short and tight with a gate and it adds tone and depth to the sound without washing it out. I also EQ the reverb return. I listen for the frequency where the reverb matches the input signal and tweak that. When you have one thing in a crowded mix you really want to bring out but adding EQ would make it sound too harsh, put it through a spring reverb. They're noisy, but thank God for gates."

Marroquin also worked on singer Pink's first album, produced in 1997 by Babyface and the hip-hop team Presidential Campaign. The record, which spawned the minor hit 'Most Girls', was "Pink before she was Pink", he says, as the singer was developing both a persona and a performance style. In keeping with her own sharp edges, Marroquin used a combination of pro reverbs, including an AMS and Lexicon 480L and 224XL units, and the clangy spring reverb from a Fender guitar amp. "Hip-hop can tend to have very little reverb, and what there is is short," he says. "When I get kind of off-the-wall records, I like to play with spring reverbs. They're cool-sounding. You can make it short and tight with a gate and it adds tone and depth to the sound without washing it out. I also EQ the reverb return. I listen for the frequency where the reverb matches the input signal and tweak that. When you have one thing in a crowded mix you really want to bring out but adding EQ would make it sound too harsh, put it through a spring reverb. They're noisy, but thank God for gates."

Marroquin also worked on singer Pink's first album, produced in 1997 by Babyface and the hip-hop team Presidential Campaign. The record, which spawned the minor hit 'Most Girls', was "Pink before she was Pink", he says, as the singer was developing both a persona and a performance style. In keeping with her own sharp edges, Marroquin used a combination of pro reverbs, including an AMS and Lexicon 480L and 224XL units, and the clangy spring reverb from a Fender guitar amp. "Hip-hop can tend to have very little reverb, and what there is is short," he says. "When I get kind of off-the-wall records, I like to play with spring reverbs. They're cool-sounding. You can make it short and tight with a gate and it adds tone and depth to the sound without washing it out. I also EQ the reverb return. I listen for the frequency where the reverb matches the input signal and tweak that. When you have one thing in a crowded mix you really want to bring out but adding EQ would make it sound too harsh, put it through a spring reverb. They're noisy, but thank God for gates."

Marroquin picked up a Grammy nomination for Cher's 'Love One Another', which, like all Cher records, required vocals very far out in front. "The problem with that is that it's easy for the vocals to get separated from the rest of the track," he cautions. "What I would do is add tube compression to the vocal. That adds warmth on the low end, around 150Hz, better than EQ can give you there. With Cher, she already has a lot of low-mid tone to her voice, so I would go to the high-mids with an Avalon 2055 equaliser and add a little there."

The Duality Delta 72 was the first to be deployed at Larrabee, with the Delta 48 replacing the 4000G.

“We were conscious about power, and the Duality made sense, as you plug it in and go, and we don't have to worry about old tech that would slow down the workflow,” Marroquin explains.

The [Delta] 72 currently resides in studio six, while the 48 is now in studio four – which is where the old 4000G used to be.

"“When I EQ, I’m looking to do something creative rather than just ‘clean up.’ That’s when I go for one of my six go-to EQs: SSL 9080 XL K for its high and low pass filters; Quad 8 or Neve 1073 for the low end; Quad 8 or Motown for lows/low mids; Motown, 1073 and API 550B for mids/high mids; and Avalon 2055 for its silky high end. Waves and I captured the best of each of my favorite EQs – and put them together this easy-to-use plugin.” —Manny Marroquin"

In this 2013 Audio Technology article featuring Manny Marroquin mixing Linkin Park's , there is a screenshot of the settings used for the Neve 1073, 1176 LN, Distressor, and the api 2500.

"There’s also an API 2500 compressor on the heavy guitars. Most synth and guitar tracks also had SSL desk compression and EQ."

In a 2014 interview with AudioTechnology, Manny Marroquin mentioned he used the Neve 33609 Compressor when mixing Burn It Down by Linkin Park:

"The outboard was an Avalon 2044 compressor going into a Neve 1073 EQ on the kick and the snare, which came up on Channels 4, 5, & 6 on the board. I also added parallel compression on all the drums, using the Neve 33690 compressor and the Pultec EPQ-1A, to add more punch."