Description

The Furman F1000-UPS: battery backup is designed exclusively for audio/video professionals and home theater aficionados.

For decades, traditional audio/video components were simple analog devices designed to easily weather power outages of well over two seconds. Later, as computer and microprocessor based components gained in popularity, their extraordinary sensitivity to even a fraction of a second’s power loss was managed with traditional UPS (uninterruptible power supply) technology.

Unfortunately, these units were solely designed for the I.T. professional. Though they included many technologies and features appropriate to that application, they fell short for premium audio/video components. Though many of these manufacturers later recognized the ever emerging professional audio/video, broadcast, and home theater market, their lack of experience led merely to a re-tooled chassis. These hastily produced UPS devices lacked the technologies necessary to truly optimize protection, performance, and control for today’s audio video components.

The Furman F1000-UPS more than fills this void, and offers your system unparalleled battery back-up technology, created from the ground up to meet the exacting demands of the world’s most sensitive audio, video and control systems!

Protection

Typical UPS systems feature antiquated surge suppression technologies that can cause as much damage and annoying lock-ups as they attempt to prevent. Only Furman offers battery back-up with our road-proven SMP non-sacrificial, zero ground contamination surge suppression technology and EVS Extreme Voltage Shutdown. After all, the most robust battery can not function if the accompanying circuits are damaged. With Furman’s F1000-UPS, you can expect years of trouble free operation.

Filtration

Though many control devices are relatively immune to moderate levels of AC line noise, today’s more sensitive devices (such as DLP projectors and line-level signal processors) certainly are not. High-definition technologies have pushed resolution to levels so extreme that virtually any AC noise capable of coupling with your system’s signal will distort, mask, or destroy the performance advantages we all strive so hard to capture and reproduce. Once again, the F1000-UPS is different. While other UPS devices feature AC line filters suitable for a I.T. closet, only Furman employs our exclusive Linear Filtering Technology (LiFT). This advanced noise filtering technology assures that today’s ultra-wide dynamic range is maintained as it must be – pristine. Remember, less AC noise equals greater content, greater resolution, and higher definition.

Programmability & Control

Audio/video systems can vary greatly in their size and components, and as such, flexibility is needed in determining how a battery backup solution should function under different circumstances. Because of this, Furman has provided open source RS-232 control over two independent AC outlet banks, with a wide range of control features to interface with an existing automation solution. Dual programmable IR control allows the unit to send a shut down command to remote components – no more expensive projector bulbs to replace in the event of a blackout.

• As with any battery back up system, the battery pack must be replaced periodically (typically every 2 years)

Typical Backup Components

Given the nature of battery backup technology, high-current audio and video components such as power amplifiers, powered subwoofers, and high-wattage displays are not recommended for use with the F1000-UPS. Not only will these components drain battery power quite rapidly, line impedance will be raised due to the F1000-UPS’s (or any) AVR and AC to DC inverter, which can induce current compression and noticeably diminish performance with high-current A/V equipment. The following components are ideal for use with the F1000-UPS:

• DAWs
• Satellite Receivers
• Cable Boxes
• Digital Video Recorders
• Media Servers
• External Hard Drives
• Digital Mixing Consoles
• Lamp Based Video Displays
• Control Systems

For power management of other components, Furman recommends Classic or Prestige Series Power Conditioners. For high-current components such as power amplifiers and powered subwoofers, solutions featuring Furman’s exclusive Power Factor Technology are ideal.

Approximate Run Time, 1500VA **

• Satellite Receiver or Cable Box = 45 Minutes
• Digital Mixing Console (16 channel) = 32 minutes
• Control System + Media Server = 9 Minutes
• DAW Computer + Digital I/O + External Hard Drive + 24” LCD Monitor = 4 minutes

** These run times should be used as a guideline only and are dependent on device and usage.

Product specs

FAQs

What is the primary function of the Furman F1000-UPS?

The Furman F1000-UPS is designed to provide uninterruptible power supply and power conditioning for sensitive studio equipment, protecting against power surges and outages while ensuring clean power delivery.

How does the Furman F1000-UPS protect studio equipment?

It offers voltage regulation, surge protection, and battery backup to safeguard equipment from power fluctuations and outages, maintaining consistent operation during power disturbances.

Can the Furman F1000-UPS handle multiple devices simultaneously?

Yes, the F1000-UPS features multiple outlets, allowing you to connect and protect several pieces of studio gear at once.

Is the Furman F1000-UPS suitable for home studios?

Absolutely, the F1000-UPS is ideal for home studios, providing essential power protection and conditioning to ensure your equipment runs smoothly and is protected from electrical issues.

Does the Furman F1000-UPS offer any battery backup features?

Yes, the F1000-UPS includes a battery backup to keep your equipment running temporarily during a power outage, allowing you to save work and safely power down devices.