The Solar V1.6DVV's Floyd Rose 1000 Series is made in South Korea with the same specs and materials as the German Original, providing excellent stability.

Owners recommend replacing the trem arm with an Original Floyd Rose Push-In Arm or Red Bishop Magik-Arm for smoother action and less slack.

Replacing the locking nut with a higher-quality one can correct string alignment issues; measurements are crucial for a proper fit.

One owner suggests playing the guitar as-is for several months before considering a fret level, indicating that issues might resolve or become more apparent with time.

The Solar's Floyd Rose flutters less compared to Ibanez Edge trems, which can be beneficial for aggressive playing but limits flutter effects.

Owners note that Epiphones, like the Annihilation V, offer build quality on par with or exceeding some Gibsons.

Although the Solar V1.6DVV stays in tune well, its trem arm may have slack, even when tightened, which some users find unsatisfactory.

Owners with stainless steel frets report that their slipperiness can contribute to strings slipping off, highlighting the importance of proper fretwork to prevent this issue.

A user who polished fret ends reported that this unintentionally led to over-beveled frets, affecting playability; a fret level is recommended over a full refret as a solution.

Users suggest aligning the neck by loosening neck screws and adjusting to prevent the E string from slipping off the fret edge.

A fret level can improve playability if the frets are worn or uneven, specifically on guitars with large stainless steel frets.

The guitar uses an R8 Jackson BH43 locking nut, which lacks narrower spacing replacements; an R3 nut could work but requires luthier adjustment due to height differences.

Smoothing fret transitions can cause outer strings, especially the high e, to slip off; this issue may be corrected with a fret level to re-establish distinct bevel edges.

Solar V1.6DVV frets may require aggressive leveling to address rounding that causes strings to slip off, especially after polishing fret ends.