Jimin

Throughout the video you can see multiple instances of BTS using the Beyerdynamic DT770 Pro headphones to record.

Throughout the video you can see Jimin with the Focal Alpha 50

Throughout the video Jimin is seen singing with this microphone that BTS uses for singing live with complex choreographies

Used for Jimin's lead vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview. An image of the settings can be found here.

Jimin chorus lead vocal: iZotope Neutron, FabFilter Pro-MB, Empirical Labs Arousor, iZotope Trash 2 & FabFilter Pro-DS, plus sends to Slate VerbSuite Classics, FabFilter Pro-R, Soundtoys EchoBoy, Waves Factory Trackspacer & FabFilter Pro-DS.

“Welcome to my vocal world! BTS like bright, punchy vocals. There is not a lot of room in the mix because there is a lot of stuff going on, so I am not boosting low end on the vocals, because you are not going to hear that. Instead I’m trying to give the vocals more presence. The first thing I have in the chain is Neutron, which is a great EQ, and I love its dynamic mode. I boost high end with the Neutron, and band three is set to 4-6000 Hz, with the dynamic mode pulling down any loud ‘ess’ sounds or anything else too sharp. The Neutron is also tidying up the bottom end. After that is the Pro-MB multiband compressor just reining in a couple of frequencies to control the vocal.

“Next is the Arousor, adding some distortion so the vocal is very spitty and present, with lots of attack. After that there’s another instance of Trash 2 set to multiband, which I am using to give the vocal drive and really making it sit solidly in the mix. You have to know how to use Trash 2, otherwise vocals can get too harsh, but in general it is a very good way of saturating and really thickening a vocal and giving it presence. It does depend on the song, I am not always so full on with a vocal! At the end I have the Pro-DS de-esser just controlling the sibilance. Sometimes I used two instances of it, one at the beginning and one at the end, but the Neutron is already kind of doing a de-essing job.

“There also are many sends on that lead vocal. The first send is going to one of my favourites, the Slate VerbSuite Classics. It’s set to a hall-type reverb with 1.75s decay, and because I set quite high pre-delays it is almost like a slap on the vocal, which puts the vocal in a nice space. The next send is to the Pro-R for a longer, bigger reverb, which works for a chorus. I have cut low end and high end as you don’t want that floating around. The Pro-R is really good for controlling those things. Next is an EchoBoy quarter-note delay, saturated by setting it to ‘Splattered’ under ‘Style’ and that send then goes into the Trackspacer. I have a send from the lead vocal going to Trackspacer, so that whenever the lead vocal is singing the Trackspacer ducks the quarter-note delay out of the way. The Trackspacer is frequency-dependent, so it will duck whatever frequencies are dominant in the vocal, which makes it great for moving stuff out of the way. Then there’s another half-time EchoBoy delay setting, which is being automated for delay shots, and finally another Pro-DS.”

Used for Jimin's lead vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview.

Jimin chorus lead vocal: iZotope Neutron, FabFilter Pro-MB, Empirical Labs Arousor, iZotope Trash 2 & FabFilter Pro-DS, plus sends to Slate VerbSuite Classics, FabFilter Pro-R, Soundtoys EchoBoy, Waves Factory Trackspacer & FabFilter Pro-DS.

“Welcome to my vocal world! BTS like bright, punchy vocals. There is not a lot of room in the mix because there is a lot of stuff going on, so I am not boosting low end on the vocals, because you are not going to hear that. Instead I’m trying to give the vocals more presence. The first thing I have in the chain is Neutron, which is a great EQ, and I love its dynamic mode. I boost high end with the Neutron, and band three is set to 4-6000 Hz, with the dynamic mode pulling down any loud ‘ess’ sounds or anything else too sharp. The Neutron is also tidying up the bottom end. After that is the Pro-MB multiband compressor just reining in a couple of frequencies to control the vocal.

“Next is the Arousor, adding some distortion so the vocal is very spitty and present, with lots of attack. After that there’s another instance of Trash 2 set to multiband, which I am using to give the vocal drive and really making it sit solidly in the mix. You have to know how to use Trash 2, otherwise vocals can get too harsh, but in general it is a very good way of saturating and really thickening a vocal and giving it presence. It does depend on the song, I am not always so full on with a vocal! At the end I have the Pro-DS de-esser just controlling the sibilance. Sometimes I used two instances of it, one at the beginning and one at the end, but the Neutron is already kind of doing a de-essing job.

“There also are many sends on that lead vocal. The first send is going to one of my favourites, the Slate VerbSuite Classics. It’s set to a hall-type reverb with 1.75s decay, and because I set quite high pre-delays it is almost like a slap on the vocal, which puts the vocal in a nice space. The next send is to the Pro-R for a longer, bigger reverb, which works for a chorus. I have cut low end and high end as you don’t want that floating around. The Pro-R is really good for controlling those things. Next is an EchoBoy quarter-note delay, saturated by setting it to ‘Splattered’ under ‘Style’ and that send then goes into the Trackspacer. I have a send from the lead vocal going to Trackspacer, so that whenever the lead vocal is singing the Trackspacer ducks the quarter-note delay out of the way. The Trackspacer is frequency-dependent, so it will duck whatever frequencies are dominant in the vocal, which makes it great for moving stuff out of the way. Then there’s another half-time EchoBoy delay setting, which is being automated for delay shots, and finally another Pro-DS.”

Used for Jimin's lead vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview.

Jimin chorus lead vocal: iZotope Neutron, FabFilter Pro-MB, Empirical Labs Arousor, iZotope Trash 2 & FabFilter Pro-DS, plus sends to Slate VerbSuite Classics, FabFilter Pro-R, Soundtoys EchoBoy, Waves Factory Trackspacer & FabFilter Pro-DS.

“Welcome to my vocal world! BTS like bright, punchy vocals. There is not a lot of room in the mix because there is a lot of stuff going on, so I am not boosting low end on the vocals, because you are not going to hear that. Instead I’m trying to give the vocals more presence. The first thing I have in the chain is Neutron, which is a great EQ, and I love its dynamic mode. I boost high end with the Neutron, and band three is set to 4-6000 Hz, with the dynamic mode pulling down any loud ‘ess’ sounds or anything else too sharp. The Neutron is also tidying up the bottom end. After that is the Pro-MB multiband compressor just reining in a couple of frequencies to control the vocal.

“Next is the Arousor, adding some distortion so the vocal is very spitty and present, with lots of attack. After that there’s another instance of Trash 2 set to multiband, which I am using to give the vocal drive and really making it sit solidly in the mix. You have to know how to use Trash 2, otherwise vocals can get too harsh, but in general it is a very good way of saturating and really thickening a vocal and giving it presence. It does depend on the song, I am not always so full on with a vocal! At the end I have the Pro-DS de-esser just controlling the sibilance. Sometimes I used two instances of it, one at the beginning and one at the end, but the Neutron is already kind of doing a de-essing job.

“There also are many sends on that lead vocal. The first send is going to one of my favourites, the Slate VerbSuite Classics. It’s set to a hall-type reverb with 1.75s decay, and because I set quite high pre-delays it is almost like a slap on the vocal, which puts the vocal in a nice space. The next send is to the Pro-R for a longer, bigger reverb, which works for a chorus. I have cut low end and high end as you don’t want that floating around. The Pro-R is really good for controlling those things. Next is an EchoBoy quarter-note delay, saturated by setting it to ‘Splattered’ under ‘Style’ and that send then goes into the Trackspacer. I have a send from the lead vocal going to Trackspacer, so that whenever the lead vocal is singing the Trackspacer ducks the quarter-note delay out of the way. The Trackspacer is frequency-dependent, so it will duck whatever frequencies are dominant in the vocal, which makes it great for moving stuff out of the way. Then there’s another half-time EchoBoy delay setting, which is being automated for delay shots, and finally another Pro-DS.”

These are the mics that BTS use for their latest concert Love Yourself: Speak Yourself and for all the shows following after that. In this Picture Jimin has a Gold SKM 6000/9000 with a Sennheiser e965 capsule (because of the shape of the capsule)

Used for Jimin's lead vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview. An image of the settings can be found here.

Jimin chorus lead vocal: iZotope Neutron, FabFilter Pro-MB, Empirical Labs Arousor, iZotope Trash 2 & FabFilter Pro-DS, plus sends to Slate VerbSuite Classics, FabFilter Pro-R, Soundtoys EchoBoy, Waves Factory Trackspacer & FabFilter Pro-DS.

“Welcome to my vocal world! BTS like bright, punchy vocals. There is not a lot of room in the mix because there is a lot of stuff going on, so I am not boosting low end on the vocals, because you are not going to hear that. Instead I’m trying to give the vocals more presence. The first thing I have in the chain is Neutron, which is a great EQ, and I love its dynamic mode. I boost high end with the Neutron, and band three is set to 4-6000 Hz, with the dynamic mode pulling down any loud ‘ess’ sounds or anything else too sharp. The Neutron is also tidying up the bottom end. After that is the Pro-MB multiband compressor just reining in a couple of frequencies to control the vocal.

“Next is the Arousor, adding some distortion so the vocal is very spitty and present, with lots of attack. After that there’s another instance of Trash 2 set to multiband, which I am using to give the vocal drive and really making it sit solidly in the mix. You have to know how to use Trash 2, otherwise vocals can get too harsh, but in general it is a very good way of saturating and really thickening a vocal and giving it presence. It does depend on the song, I am not always so full on with a vocal! At the end I have the Pro-DS de-esser just controlling the sibilance. Sometimes I used two instances of it, one at the beginning and one at the end, but the Neutron is already kind of doing a de-essing job.

“There also are many sends on that lead vocal. The first send is going to one of my favourites, the Slate VerbSuite Classics. It’s set to a hall-type reverb with 1.75s decay, and because I set quite high pre-delays it is almost like a slap on the vocal, which puts the vocal in a nice space. The next send is to the Pro-R for a longer, bigger reverb, which works for a chorus. I have cut low end and high end as you don’t want that floating around. The Pro-R is really good for controlling those things. Next is an EchoBoy quarter-note delay, saturated by setting it to ‘Splattered’ under ‘Style’ and that send then goes into the Trackspacer. I have a send from the lead vocal going to Trackspacer, so that whenever the lead vocal is singing the Trackspacer ducks the quarter-note delay out of the way. The Trackspacer is frequency-dependent, so it will duck whatever frequencies are dominant in the vocal, which makes it great for moving stuff out of the way. Then there’s another half-time EchoBoy delay setting, which is being automated for delay shots, and finally another Pro-DS.”

Used for Jimin's lead vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview. An image of the settings can be found here.

Jimin chorus lead vocal: iZotope Neutron, FabFilter Pro-MB, Empirical Labs Arousor, iZotope Trash 2 & FabFilter Pro-DS, plus sends to Slate VerbSuite Classics, FabFilter Pro-R, Soundtoys EchoBoy, Waves Factory Trackspacer & FabFilter Pro-DS.

“Welcome to my vocal world! BTS like bright, punchy vocals. There is not a lot of room in the mix because there is a lot of stuff going on, so I am not boosting low end on the vocals, because you are not going to hear that. Instead I’m trying to give the vocals more presence. The first thing I have in the chain is Neutron, which is a great EQ, and I love its dynamic mode. I boost high end with the Neutron, and band three is set to 4-6000 Hz, with the dynamic mode pulling down any loud ‘ess’ sounds or anything else too sharp. The Neutron is also tidying up the bottom end. After that is the Pro-MB multiband compressor just reining in a couple of frequencies to control the vocal.

“Next is the Arousor, adding some distortion so the vocal is very spitty and present, with lots of attack. After that there’s another instance of Trash 2 set to multiband, which I am using to give the vocal drive and really making it sit solidly in the mix. You have to know how to use Trash 2, otherwise vocals can get too harsh, but in general it is a very good way of saturating and really thickening a vocal and giving it presence. It does depend on the song, I am not always so full on with a vocal! At the end I have the Pro-DS de-esser just controlling the sibilance. Sometimes I used two instances of it, one at the beginning and one at the end, but the Neutron is already kind of doing a de-essing job.

“There also are many sends on that lead vocal. The first send is going to one of my favourites, the Slate VerbSuite Classics. It’s set to a hall-type reverb with 1.75s decay, and because I set quite high pre-delays it is almost like a slap on the vocal, which puts the vocal in a nice space. The next send is to the Pro-R for a longer, bigger reverb, which works for a chorus. I have cut low end and high end as you don’t want that floating around. The Pro-R is really good for controlling those things. Next is an EchoBoy quarter-note delay, saturated by setting it to ‘Splattered’ under ‘Style’ and that send then goes into the Trackspacer. I have a send from the lead vocal going to Trackspacer, so that whenever the lead vocal is singing the Trackspacer ducks the quarter-note delay out of the way. The Trackspacer is frequency-dependent, so it will duck whatever frequencies are dominant in the vocal, which makes it great for moving stuff out of the way. Then there’s another half-time EchoBoy delay setting, which is being automated for delay shots, and finally another Pro-DS.”

Used for Jimin's lead vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview. An image of the settings can be found here.

Jimin chorus lead vocal: iZotope Neutron, FabFilter Pro-MB, Empirical Labs Arousor, iZotope Trash 2 & FabFilter Pro-DS, plus sends to Slate VerbSuite Classics, FabFilter Pro-R, Soundtoys EchoBoy, Waves Factory Trackspacer & FabFilter Pro-DS.

“Welcome to my vocal world! BTS like bright, punchy vocals. There is not a lot of room in the mix because there is a lot of stuff going on, so I am not boosting low end on the vocals, because you are not going to hear that. Instead I’m trying to give the vocals more presence. The first thing I have in the chain is Neutron, which is a great EQ, and I love its dynamic mode. I boost high end with the Neutron, and band three is set to 4-6000 Hz, with the dynamic mode pulling down any loud ‘ess’ sounds or anything else too sharp. The Neutron is also tidying up the bottom end. After that is the Pro-MB multiband compressor just reining in a couple of frequencies to control the vocal.

“Next is the Arousor, adding some distortion so the vocal is very spitty and present, with lots of attack. After that there’s another instance of Trash 2 set to multiband, which I am using to give the vocal drive and really making it sit solidly in the mix. You have to know how to use Trash 2, otherwise vocals can get too harsh, but in general it is a very good way of saturating and really thickening a vocal and giving it presence. It does depend on the song, I am not always so full on with a vocal! At the end I have the Pro-DS de-esser just controlling the sibilance. Sometimes I used two instances of it, one at the beginning and one at the end, but the Neutron is already kind of doing a de-essing job.

“There also are many sends on that lead vocal. The first send is going to one of my favourites, the Slate VerbSuite Classics. It’s set to a hall-type reverb with 1.75s decay, and because I set quite high pre-delays it is almost like a slap on the vocal, which puts the vocal in a nice space. The next send is to the Pro-R for a longer, bigger reverb, which works for a chorus. I have cut low end and high end as you don’t want that floating around. The Pro-R is really good for controlling those things. Next is an EchoBoy quarter-note delay, saturated by setting it to ‘Splattered’ under ‘Style’ and that send then goes into the Trackspacer. I have a send from the lead vocal going to Trackspacer, so that whenever the lead vocal is singing the Trackspacer ducks the quarter-note delay out of the way. The Trackspacer is frequency-dependent, so it will duck whatever frequencies are dominant in the vocal, which makes it great for moving stuff out of the way. Then there’s another half-time EchoBoy delay setting, which is being automated for delay shots, and finally another Pro-DS.”

Jimin and Jungkook play this guitar throughout the linked Bangtan Bomb.

At 00:36 and other parts of the video BTS is seen recording with the Telefuken 251. It is used to record most of their songs

Used for Jimin's lead vocals and the rest of BTS' vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview. An image of the settings can be found here.

Jimin chorus lead vocal: iZotope Neutron, FabFilter Pro-MB, Empirical Labs Arousor, iZotope Trash 2 & FabFilter Pro-DS, plus sends to Slate VerbSuite Classics, FabFilter Pro-R, Soundtoys EchoBoy, Waves Factory Trackspacer & FabFilter Pro-DS.

“Welcome to my vocal world! BTS like bright, punchy vocals. There is not a lot of room in the mix because there is a lot of stuff going on, so I am not boosting low end on the vocals, because you are not going to hear that. Instead I’m trying to give the vocals more presence. The first thing I have in the chain is Neutron, which is a great EQ, and I love its dynamic mode. I boost high end with the Neutron, and band three is set to 4-6000 Hz, with the dynamic mode pulling down any loud ‘ess’ sounds or anything else too sharp. The Neutron is also tidying up the bottom end. After that is the Pro-MB multiband compressor just reining in a couple of frequencies to control the vocal.

“Next is the Arousor, adding some distortion so the vocal is very spitty and present, with lots of attack. After that there’s another instance of Trash 2 set to multiband, which I am using to give the vocal drive and really making it sit solidly in the mix. You have to know how to use Trash 2, otherwise vocals can get too harsh, but in general it is a very good way of saturating and really thickening a vocal and giving it presence. It does depend on the song, I am not always so full on with a vocal! At the end I have the Pro-DS de-esser just controlling the sibilance. Sometimes I used two instances of it, one at the beginning and one at the end, but the Neutron is already kind of doing a de-essing job.

“There also are many sends on that lead vocal. The first send is going to one of my favourites, the Slate VerbSuite Classics. It’s set to a hall-type reverb with 1.75s decay, and because I set quite high pre-delays it is almost like a slap on the vocal, which puts the vocal in a nice space. The next send is to the Pro-R for a longer, bigger reverb, which works for a chorus. I have cut low end and high end as you don’t want that floating around. The Pro-R is really good for controlling those things. Next is an EchoBoy quarter-note delay, saturated by setting it to ‘Splattered’ under ‘Style’ and that send then goes into the Trackspacer. I have a send from the lead vocal going to Trackspacer, so that whenever the lead vocal is singing the Trackspacer ducks the quarter-note delay out of the way. The Trackspacer is frequency-dependent, so it will duck whatever frequencies are dominant in the vocal, which makes it great for moving stuff out of the way. Then there’s another half-time EchoBoy delay setting, which is being automated for delay shots, and finally another Pro-DS.”

‘All Vocals’ bus: Overloud Tapedesk, DMG Audio EQuilibrium & Kazrog KClip.

“This is pretty much my standard chain. I have the Tapedesk as my first plug-in. I love mixing into this, because I love the saturation that it gives to vocals. This is followed by the EQuilibrium, which notches out some high end. The Eiosis Air EQ Premium is next and does something slightly more interesting, because I am automating it with the green automation line. I use the automation to turn the Strength slider fully up for the pre-choruses and the choruses, which adds real excitement to all the vocals in these areas. Then there’s the Pro-DS de-esser set to a pretty high threshold, because I have already de-essed on the individual tracks. It’s just to catch anything else that I may have missed. Finally the KClip is just catching any remaining peaks.”

Used for Jimin's lead vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview.

Jimin chorus lead vocal: iZotope Neutron, FabFilter Pro-MB, Empirical Labs Arousor, iZotope Trash 2 & FabFilter Pro-DS, plus sends to Slate VerbSuite Classics, FabFilter Pro-R, Soundtoys EchoBoy, Waves Factory Trackspacer & FabFilter Pro-DS.

“Welcome to my vocal world! BTS like bright, punchy vocals. There is not a lot of room in the mix because there is a lot of stuff going on, so I am not boosting low end on the vocals, because you are not going to hear that. Instead I’m trying to give the vocals more presence. The first thing I have in the chain is Neutron, which is a great EQ, and I love its dynamic mode. I boost high end with the Neutron, and band three is set to 4-6000 Hz, with the dynamic mode pulling down any loud ‘ess’ sounds or anything else too sharp. The Neutron is also tidying up the bottom end. After that is the Pro-MB multiband compressor just reining in a couple of frequencies to control the vocal.

“Next is the Arousor, adding some distortion so the vocal is very spitty and present, with lots of attack. After that there’s another instance of Trash 2 set to multiband, which I am using to give the vocal drive and really making it sit solidly in the mix. You have to know how to use Trash 2, otherwise vocals can get too harsh, but in general it is a very good way of saturating and really thickening a vocal and giving it presence. It does depend on the song, I am not always so full on with a vocal! At the end I have the Pro-DS de-esser just controlling the sibilance. Sometimes I used two instances of it, one at the beginning and one at the end, but the Neutron is already kind of doing a de-essing job.

“There also are many sends on that lead vocal. The first send is going to one of my favourites, the Slate VerbSuite Classics. It’s set to a hall-type reverb with 1.75s decay, and because I set quite high pre-delays it is almost like a slap on the vocal, which puts the vocal in a nice space. The next send is to the Pro-R for a longer, bigger reverb, which works for a chorus. I have cut low end and high end as you don’t want that floating around. The Pro-R is really good for controlling those things. Next is an EchoBoy quarter-note delay, saturated by setting it to ‘Splattered’ under ‘Style’ and that send then goes into the Trackspacer. I have a send from the lead vocal going to Trackspacer, so that whenever the lead vocal is singing the Trackspacer ducks the quarter-note delay out of the way. The Trackspacer is frequency-dependent, so it will duck whatever frequencies are dominant in the vocal, which makes it great for moving stuff out of the way. Then there’s another half-time EchoBoy delay setting, which is being automated for delay shots, and finally another Pro-DS.”

Used for Jimin's lead vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview.

Jimin chorus lead vocal: iZotope Neutron, FabFilter Pro-MB, Empirical Labs Arousor, iZotope Trash 2 & FabFilter Pro-DS, plus sends to Slate VerbSuite Classics, FabFilter Pro-R, Soundtoys EchoBoy, Waves Factory Trackspacer & FabFilter Pro-DS.

“Welcome to my vocal world! BTS like bright, punchy vocals. There is not a lot of room in the mix because there is a lot of stuff going on, so I am not boosting low end on the vocals, because you are not going to hear that. Instead I’m trying to give the vocals more presence. The first thing I have in the chain is Neutron, which is a great EQ, and I love its dynamic mode. I boost high end with the Neutron, and band three is set to 4-6000 Hz, with the dynamic mode pulling down any loud ‘ess’ sounds or anything else too sharp. The Neutron is also tidying up the bottom end. After that is the Pro-MB multiband compressor just reining in a couple of frequencies to control the vocal.

“Next is the Arousor, adding some distortion so the vocal is very spitty and present, with lots of attack. After that there’s another instance of Trash 2 set to multiband, which I am using to give the vocal drive and really making it sit solidly in the mix. You have to know how to use Trash 2, otherwise vocals can get too harsh, but in general it is a very good way of saturating and really thickening a vocal and giving it presence. It does depend on the song, I am not always so full on with a vocal! At the end I have the Pro-DS de-esser just controlling the sibilance. Sometimes I used two instances of it, one at the beginning and one at the end, but the Neutron is already kind of doing a de-essing job.

“There also are many sends on that lead vocal. The first send is going to one of my favourites, the Slate VerbSuite Classics. It’s set to a hall-type reverb with 1.75s decay, and because I set quite high pre-delays it is almost like a slap on the vocal, which puts the vocal in a nice space. The next send is to the Pro-R for a longer, bigger reverb, which works for a chorus. I have cut low end and high end as you don’t want that floating around. The Pro-R is really good for controlling those things. Next is an EchoBoy quarter-note delay, saturated by setting it to ‘Splattered’ under ‘Style’ and that send then goes into the Trackspacer. I have a send from the lead vocal going to Trackspacer, so that whenever the lead vocal is singing the Trackspacer ducks the quarter-note delay out of the way. The Trackspacer is frequency-dependent, so it will duck whatever frequencies are dominant in the vocal, which makes it great for moving stuff out of the way. Then there’s another half-time EchoBoy delay setting, which is being automated for delay shots, and finally another Pro-DS.”

Used for BTS' vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview.

‘All Vocals’ bus: Overloud Tapedesk, DMG Audio EQuilibrium & Kazrog KClip.

“This is pretty much my standard chain. I have the Tapedesk as my first plug-in. I love mixing into this, because I love the saturation that it gives to vocals. This is followed by the EQuilibrium, which notches out some high end. The Eiosis Air EQ Premium is next and does something slightly more interesting, because I am automating it with the green automation line. I use the automation to turn the Strength slider fully up for the pre-choruses and the choruses, which adds real excitement to all the vocals in these areas. Then there’s the Pro-DS de-esser set to a pretty high threshold, because I have already de-essed on the individual tracks. It’s just to catch anything else that I may have missed. Finally the KClip is just catching any remaining peaks.”

Used for BTS' vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview.

‘All Vocals’ bus: Overloud Tapedesk, DMG Audio EQuilibrium & Kazrog KClip.

“This is pretty much my standard chain. I have the Tapedesk as my first plug-in. I love mixing into this, because I love the saturation that it gives to vocals. This is followed by the EQuilibrium, which notches out some high end. The Eiosis Air EQ Premium is next and does something slightly more interesting, because I am automating it with the green automation line. I use the automation to turn the Strength slider fully up for the pre-choruses and the choruses, which adds real excitement to all the vocals in these areas. Then there’s the Pro-DS de-esser set to a pretty high threshold, because I have already de-essed on the individual tracks. It’s just to catch anything else that I may have missed. Finally the KClip is just catching any remaining peaks.”

Used for BTS' vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview.

‘All Vocals’ bus: Overloud Tapedesk, DMG Audio EQuilibrium & Kazrog KClip.

“This is pretty much my standard chain. I have the Tapedesk as my first plug-in. I love mixing into this, because I love the saturation that it gives to vocals. This is followed by the EQuilibrium, which notches out some high end. The Eiosis Air EQ Premium is next and does something slightly more interesting, because I am automating it with the green automation line. I use the automation to turn the Strength slider fully up for the pre-choruses and the choruses, which adds real excitement to all the vocals in these areas. Then there’s the Pro-DS de-esser set to a pretty high threshold, because I have already de-essed on the individual tracks. It’s just to catch anything else that I may have missed. Finally the KClip is just catching any remaining peaks.”

Used for BTS' vocals on "Fake Love", as stated by producer James Reynolds in this August 2018 Sound on Sound interview.

‘All Vocals’ bus: Overloud Tapedesk, DMG Audio EQuilibrium & Kazrog KClip.

“This is pretty much my standard chain. I have the Tapedesk as my first plug-in. I love mixing into this, because I love the saturation that it gives to vocals. This is followed by the EQuilibrium, which notches out some high end. The Eiosis Air EQ Premium is next and does something slightly more interesting, because I am automating it with the green automation line. I use the automation to turn the Strength slider fully up for the pre-choruses and the choruses, which adds real excitement to all the vocals in these areas. Then there’s the Pro-DS de-esser set to a pretty high threshold, because I have already de-essed on the individual tracks. It’s just to catch anything else that I may have missed. Finally the KClip is just catching any remaining peaks.”