Caleb Followill

There used to be a video on YouTube entitled "Kings of Leon - In depth gear interview" that looks to be unavailable now. In that video, Caleb said:

"Gibson, 1972, ES-325. And I've got another, I've got a backup, but it doesn't sound as good. And this one, I think it's because of the hole that I've dug back from when we were playing punk. It's my favorite guitar ever in the history of guitars. Angelo has a guitar that I really want, it's a tiny little acoustic. I think it's a special guitar and I don't think he uses it as well. He writes bad songs with it, and I think I could write good songs with it. I'm sure he's going to be pissed. Angleo is my best friend, he would not hate me. But Angelo got this [guitar] on eBay for the first record. This is the guitar that has since then had my heart. And even though it's a vintage it was perfect. Amazing. I've gotten this far in seven years. And Willy, obviously, he has the best guitar in the world with a big hole in it, but it took him a long time to get there, and I think I've done pretty good in seven years. I'm very much a blessed person. I have a wonderful woman in my life, and when I hold her I feel so good and I feel so close to home. But it's also the same thing when my guitar is right here, I feel like I'm home. Even though I don't play it good I play, I play it with all my heart."

"Caleb plays a Hummingbird, this is a nice guitar. He just got it not too long ago in Australia. It's deep and rich. Gibson hooked us up," explains Caleb Followill's guitar tech around 2:19 into this video.

Caleb used a Black Tele for the California Waiting EP. He talks about this at around 1.13 in the video.

Caleb has started using this acoustic guitar live and can be seen with it trough the video. He no longer seems to use the Gibson Hummingbird.

"Caleb is playing the Matchless 2x12s DC. It’s kind of cool, it's its own thing. It's got tone selector switches, it sound can't really dial out the middle, bass, and stuff like that. It just gives you what it gives you. It's pretty good though, pretty loud if you want it to be," says Caleb Followill's guitar tech.

"...eventually I went to an AC30 and then a Matchless. And then I got tired of all the big noise and I went back to the AC30."

"I started with an AC15, a Vox, but eventually I went to an AC30 and then a Matchless. And then I got tired of all the big noise and I went back to the AC30. And I think I might be back at the AC15. If not, I've got four AC15s, four of the last ones, made and I'm going to make a room out of it. I'm going to put rubber all over them and it's going to be my kid's room. If my little kid hits his head I'll be like, 'Well, at least you hit your head on an AC15'. All of us have doubles of everything we've ever had."

VOX amps USA shared a photo of Kings of Leon performing live at The Governors Ball Music Festival 2013. Behind Caleb Followill, his two Vox AC15 combo amps can be seen. The photo is captioned:

Caleb Followill rocking two AC15s on-stage with Kings Of Leon at Governors Ball Music Festival!

At 0:01 the Tiny terror Sits behind Caleb as his main Guitar Amp.

During this photo in the official Kings of Leon instagram account, somebody in the crew made this shoot from the backstage before the band joined the stage in Zagreb, Croatia. A pair of AC15C1-CMs amps are know to be played by Caleb, as the Matchless is used by Matthew Followill and is found in other pictures in the account.

The updates URL offers a frontal view shows the details of the amps, which are behind Mr. Followill.

Used for Only by the Night, particularly on "Sex on Fire", as stated by producer Jacquire King in this July 31, 2019 interview with producer Warren Huart at 1:27:49.

Huart: And then the Selmer you were talking about that got used on the album quite a lot.

King: Yeah, I definitely know that it's on "Sex on Fire", I don't think it's on "Use Somebody". I think that was Caleb's Matchless that we used on "Use Somebody". And that's also the "Let It Go" song of James Bay, that's the guitar amp that was used for that.

A Boss TU-3 Chromatic Pedal Tuner appears at 5:02 in this rundown video of Caleb Followill's rig.

"We have an MXR which we use for more verb," says Caleb Followill's guitar tech.

Caleb Followill's guitar tech points out at 5:09 a Boss TR-2 Tremolo Pedal used by Caleb Followill.

An MXR M-102 Dyna Comp Compressor Pedal appearsin this video at 5:16 in Caleb Followill's gear rack.

"This is kind of like a Fulldrive MOSFET. It's real beefy and crunchy. It sounds really good," says Caleb Followill's guitar tech.

"It kind of sounds like an organ because it's a polyphonic generator," says Caleb Followill's guitar tech.

at the video supersoaker we can seen at the minute 2:55 the pedal

"The Voodoo Lab ground switcher runs back into a rack," says Caleb Followill's guitar tech.

Used for Followill's electric guitar on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview.

"We had five or six guitar amplifiers available for each guitar, and again, we picked the ones that were most appropriate for the song. Angelo and I would listen to the guitar parts and mix and match amplifiers. Sometimes we'd put reverb on one amp and a delay on another, or effect pedals on both. We had all kinds of combinations, although we kept it to two amplifiers per performance for each player. I'd put an SM57 in front of one amp and a U67 in front of the other. The guitars went through API mic pres, an API 550A EQ, and I also used some APSI parametric EQs. Occasionally I'd put an 1176 in the signal chain, but in general I don't use much compression on distorted electric guitars going to tape, because there's not a lot of dynamic range to them as it is. The synth–like reverb you can hear on the guitar was done at Blackbird on an Eventide DSP4000 and added during the transfer to Pro Tools.

(...) **Guitars: **Massenburg DesignWorks EQ, Sound Toys Echoboy, Cooper Time Cube, Digidesign delay, Audio Ease Altiverb

(...) "I also used an Echoboy for delay on certain sections, like in the choruses. There was a little bit of bus compression on the guitars and a little bit of EQ, all very minor stuff, because I had already recorded what I wanted. The only radical EQ is on the Cooper Time Cube delay, which I described above, and which I applied to Caleb's guitar. I took out everything below 861Hz to get rid of the darker tone that was obscuring the source tone a bit. There's also a bit of Digirack delay on Caleb's guitar, to give it a bit more dimension by panning it to the other side than the track itself."

Used for Followill's electric guitar on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview.

"We had five or six guitar amplifiers available for each guitar, and again, we picked the ones that were most appropriate for the song. Angelo and I would listen to the guitar parts and mix and match amplifiers. Sometimes we'd put reverb on one amp and a delay on another, or effect pedals on both. We had all kinds of combinations, although we kept it to two amplifiers per performance for each player. I'd put an SM57 in front of one amp and a U67 in front of the other. The guitars went through API mic pres, an API 550A EQ, and I also used some APSI parametric EQs. Occasionally I'd put an 1176 in the signal chain, but in general I don't use much compression on distorted electric guitars going to tape, because there's not a lot of dynamic range to them as it is. The synth–like reverb you can hear on the guitar was done at Blackbird on an Eventide DSP4000 and added during the transfer to Pro Tools.

(...) **Guitars: **Massenburg DesignWorks EQ, Sound Toys Echoboy, Cooper Time Cube, Digidesign delay, Audio Ease Altiverb

(...) "I also used an Echoboy for delay on certain sections, like in the choruses. There was a little bit of bus compression on the guitars and a little bit of EQ, all very minor stuff, because I had already recorded what I wanted. The only radical EQ is on the Cooper Time Cube delay, which I described above, and which I applied to Caleb's guitar. I took out everything below 861Hz to get rid of the darker tone that was obscuring the source tone a bit. There's also a bit of Digirack delay on Caleb's guitar, to give it a bit more dimension by panning it to the other side than the track itself."

Used "occasionally" for the electric guitar on Only by the Night, as stated by producer Jacquire King in this December 2008 Sound on Sound interview.

"We had five or six guitar amplifiers available for each guitar, and again, we picked the ones that were most appropriate for the song. Angelo and I would listen to the guitar parts and mix and match amplifiers. Sometimes we'd put reverb on one amp and a delay on another, or effect pedals on both. We had all kinds of combinations, although we kept it to two amplifiers per performance for each player. I'd put an SM57 in front of one amp and a U67 in front of the other. The guitars went through API mic pres, an API 550A EQ, and I also used some APSI parametric EQs. Occasionally I'd put an 1176 in the signal chain, but in general I don't use much compression on distorted electric guitars going to tape, because there's not a lot of dynamic range to them as it is. The synth–like reverb you can hear on the guitar was done at Blackbird on an Eventide DSP4000 and added during the transfer to Pro Tools.

(...) **Guitars: **Massenburg DesignWorks EQ, Sound Toys Echoboy, Cooper Time Cube, Digidesign delay, Audio Ease Altiverb

(...) "I also used an Echoboy for delay on certain sections, like in the choruses. There was a little bit of bus compression on the guitars and a little bit of EQ, all very minor stuff, because I had already recorded what I wanted. The only radical EQ is on the Cooper Time Cube delay, which I described above, and which I applied to Caleb's guitar. I took out everything below 861Hz to get rid of the darker tone that was obscuring the source tone a bit. There's also a bit of Digirack delay on Caleb's guitar, to give it a bit more dimension by panning it to the other side than the track itself."

Used for "synth-like reverb" of the electric guitar on Only by the Night, as stated by producer Jacquire King in this December 2008 Sound on Sound interview.

"We had five or six guitar amplifiers available for each guitar, and again, we picked the ones that were most appropriate for the song. Angelo and I would listen to the guitar parts and mix and match amplifiers. Sometimes we'd put reverb on one amp and a delay on another, or effect pedals on both. We had all kinds of combinations, although we kept it to two amplifiers per performance for each player. I'd put an SM57 in front of one amp and a U67 in front of the other. The guitars went through API mic pres, an API 550A EQ, and I also used some APSI parametric EQs. Occasionally I'd put an 1176 in the signal chain, but in general I don't use much compression on distorted electric guitars going to tape, because there's not a lot of dynamic range to them as it is. The synth–like reverb you can hear on the guitar was done at Blackbird on an Eventide DSP4000 and added during the transfer to Pro Tools.

(...) **Guitars: **Massenburg DesignWorks EQ, Sound Toys Echoboy, Cooper Time Cube, Digidesign delay, Audio Ease Altiverb

(...) "I also used an Echoboy for delay on certain sections, like in the choruses. There was a little bit of bus compression on the guitars and a little bit of EQ, all very minor stuff, because I had already recorded what I wanted. The only radical EQ is on the Cooper Time Cube delay, which I described above, and which I applied to Caleb's guitar. I took out everything below 861Hz to get rid of the darker tone that was obscuring the source tone a bit. There's also a bit of Digirack delay on Caleb's guitar, to give it a bit more dimension by panning it to the other side than the track itself."

Used for the vocals on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview. An image of the item can be found here.

• Vocals: Sound Toys Echoboy, Audio Ease Altiverb, Massenburg DesignWorks EQ, Neve 1099, Urei 1176, Dbx 902, Dolby A encoder, Teletronix LA3A

"I had a Sound Toys Echoboy delay and an Altiverb reverb, set to the EMT 140 plate, on the vocals. In fact, there are two or three delays and two or three reverbs in total, different amounts in different sections of the song. I had a Massenburg plug–in EQ on the vocal bus, and underneath it you can see my insert signal chain: Neve 1099 EQ/Urei Blue Stripe 1176/Dbx 902 de–esser. I pre-mix in my computer and things are coming out in stems, and going out into the desk and the Folcrom mixer for mixdown to stereo. The 1099/1176/902 were inserted in the analogue realm and daisy-chained. There's also a distant lead double in the chorus. I call that a performed effect. Instead of using a delay and modulation to get something in the background, you record a second performance in a different space and with a different microphone. You get something more deliberate and unique that way. Finally, once it came to summing, I also added some Dolby A to the vocals, which gives an excited high-frequency sound that I sent through an LA3A and blended back in."

Used for the vocals on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview. An image of the item can be found here.

• Vocals: Sound Toys Echoboy, Audio Ease Altiverb, Massenburg DesignWorks EQ, Neve 1099, Urei 1176, Dbx 902, Dolby A encoder, Teletronix LA3A

"I had a Sound Toys Echoboy delay and an Altiverb reverb, set to the EMT 140 plate, on the vocals. In fact, there are two or three delays and two or three reverbs in total, different amounts in different sections of the song. I had a Massenburg plug–in EQ on the vocal bus, and underneath it you can see my insert signal chain: Neve 1099 EQ/Urei Blue Stripe 1176/Dbx 902 de–esser. I pre-mix in my computer and things are coming out in stems, and going out into the desk and the Folcrom mixer for mixdown to stereo. The 1099/1176/902 were inserted in the analogue realm and daisy-chained. There's also a distant lead double in the chorus. I call that a performed effect. Instead of using a delay and modulation to get something in the background, you record a second performance in a different space and with a different microphone. You get something more deliberate and unique that way. Finally, once it came to summing, I also added some Dolby A to the vocals, which gives an excited high-frequency sound that I sent through an LA3A and blended back in."

Used for the vocals on "Sex on Fire", as stated by Only by the Night producer Jacquire King in this December 2008 Sound on Sound interview. An image of the item can be found here.

• Vocals: Sound Toys Echoboy, Audio Ease Altiverb, Massenburg DesignWorks EQ, Neve 1099, Urei 1176, Dbx 902, Dolby A encoder, Teletronix LA3A

"I had a Sound Toys Echoboy delay and an Altiverb reverb, set to the EMT 140 plate, on the vocals. In fact, there are two or three delays and two or three reverbs in total, different amounts in different sections of the song. I had a Massenburg plug–in EQ on the vocal bus, and underneath it you can see my insert signal chain: Neve 1099 EQ/Urei Blue Stripe 1176/Dbx 902 de–esser. I pre-mix in my computer and things are coming out in stems, and going out into the desk and the Folcrom mixer for mixdown to stereo. The 1099/1176/902 were inserted in the analogue realm and daisy-chained. There's also a distant lead double in the chorus. I call that a performed effect. Instead of using a delay and modulation to get something in the background, you record a second performance in a different space and with a different microphone. You get something more deliberate and unique that way. Finally, once it came to summing, I also added some Dolby A to the vocals, which gives an excited high-frequency sound that I sent through an LA3A and blended back in."