The Full English Overdrive by RJM

The Full English Overdrive uses the same technology to give you a fully programmable pedal with a 100% analog signal path, but this time with a distinctly British flavor.
Six modes are available, ranging from clean boost to overdrive to high gain distortion. You can use these modes to create up to 8 presets and recall them with the press of a button.
The Full English also features a 3 band active post-EQ for powerful tone shaping ability.
We’ve spent a great deal of time dialing in the tone of this pedal, and we feel like this pedal does a great job of capturing the sound of quite a few classic pedals, plus going well beyond those famous tones.
The combination of the EQ and the 6 overdrive and distortion modes provide an amazing amount of versatility.
When used with a MIDI controller, you can access up to 100 presets and use an external controller to adjust parameters on the fly.
There is special support for MIDI controllers with expression pedals – you can easily set up knob settings for the “heel down” and “toe down” positions of the pedal and the Full English will smoothly transition between those settings as you move the pedal.

Specs:

• Push – This mode is a clean boost that’s designed to push the front end of an amp. It has a high maximum output level.
• Blues – Inspired by a British low to medium gain pedal from the 90’s that’s gained in popularity over the years.
• Royal – Based on a very popular boutique modification of the “Blues” pedal above, it has a slightly different frequency response and overdrive characteristic.
• Imperial – A higher gain version of Royal, using hard clipping instead of soft clipping.
• Shred – A high gain, compressed distortion mode designed for soloing. Great for 80’s shred and beyond
• Stack – A big sounding distortion mode, more open and dynamic than Shred, designed to sound like a high gain Amp.
• 3 band EQ offers approximately 10dB of boost or cut in each band
• 8 presets accessible from the pedal itself (4 presets in each of 2 banks)
• 100 presets available using a MIDI controller
• Responds to both MIDI PC and CC messages
• 1/4″ mono unbalanced audio input and output
• 5-pin MIDI input and output, bidirectional when used with compatible equipment
• USB-C connector for connection to phone, tablet or computer. Appears as a standard MIDI device in MIDI enabled apps
• Power Requirements: 9VDC power supply capable of providing 150mA or more current
• BOSS-type power connector, 5.5mm/2.1mm barrel connector, center negative
• Dimensions: 4.4 (w) x 5.25 (d) x 2.4 (h) inches (11.1 (w) x 13.3 (d) x 6.1 (h) cm)
• Weight: 1.1 lbs / 0.5 kg
• Made in USA

Product specs